#10 1/2" Pan Head A2 Phillips Head Stainless Steel Sheet Metal Screw 20 Pack. Replace those unsightly rusting, loose or missing cabinet screws with our Stainless screws for a neat finish. Oversized to accommodate loose cabinet or stripped holes.

8' 6AWG Welding Wire Lead Set with heavy duty polished clamps featuring coated clamp handles. a 50 lb. Jaw Strength provides positive connections and color coded wires make for easy identification. These even have molded strain relief built on the cables. Ring terminal connections make installation a snap.

238-260-666 Century Positive Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

238-261-666 Century Negative Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

244-047-666 50 Amp Diode Replacement Kit (4). Observe correct polarity when installing. Color ring denotes cathode end. Replace all diodes in the same orientation as original diodes.

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

246-057-000 Rotary Selector Switch

246-057-200 Rotary Selector Switch

6 Position Rotary Selector Switch with off. Replaces older 246-057-000, 246-057-100, 246-057-200 and 246-057-666 switches. Installation requires drilling mounting holes. Several different styles of switches were used under the old part number 246-057-XXX. Although slightly different, they are completely interchangeable. The new style switch 246-058-666 has different mounting and the wiring is slightly different. Included is a mounting template for drilling holes in your cabinet and a wiring connection chart for ease of installation. Screws and mounting template included. For knob see 246-041-666.
TO EASE INSTALLATION DO NOT REMOVE THE WIRES FROM YOUR OLD SWITCH UNTIL THE NEW PART ARRIVES

120 Minute mechanical timer with knob. 120 minute total time two 1/4 spade terminal connections, no finish bell. Replaces older timer 246-337-000, 246-167-000, 246-167-666. Mounting on your timer may be different than the replacement, inspect your unit before purchase, some older units may have had electric timers which may require rewiring. (Includes Screws)

246-385-000 Circuit Breaker SLA-135, Open construction, automatic reset, no terminal Hardware

Ammeter Horizontal 0-60 AMP features easy snap-in installation. Green Red Charge Rate face. 0-60 Amp range and bolt through induction pick-up for greater accuracy.

Ammeter Horizontal 0-60 AMP features easy snap-in installation. Green Red Charge Rate face. 0-60 Amp range and wire through induction pick-up for greater accuracy. Replaces old style bolt through meters.

247-147-000 Ammeter Horizontal 0-60 Amp features easy snap-in installation. Green Red Charge Rate face. 0-60 Amp range and wire through induction pick-up for greater accuracy. Replaces old style bolt through meters.

Ammeter Horizontal 0-60 AMP features easy snap-in installation. Green Red Charge Rate face. 0-60 Amp range and wire through induction pick-up for greater accuracy. Replaces old style bolt through meters.

Clamps Positive & Negative. Screw Type Connection for ring terminal cables to anchor wire for solderless connection. Dual Hot Jaws for better power distribution. Includes Phillips anchor screws. Does not include hardware for cables, (ring terminals, solder etc...).

Black Negative Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

Red Positive Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

316-014-000 Fan Blade 6" 4 Blade CW

865-366-666  Rectifier With Insulators (New Style) replaces older 8 diode rectifier.

The Century K3149-1 Automotive battery charger has features found on most commercial chargers at a price that can't be beat. A 200 amp 12v engine start helps start stubborn Engines and a 40 amp high, 20 amp medium and 2 amp low 12v charge settings for maximum range for most automotive batteries. 130 amp start and 40 amp high 6v charge setting for farm and fleet duty. A Low 2 amp setting is ideal for charging 12 volt motorcycle and lawn mower batteries. The Test feature identifies 12V battery and alternator problems, as well as indicates battery state of charge. Charges 6 & 12 volt maintenance free, conventional wet, deep cycle, AGM, and gel batteries used in cars, trucks, farm equipment, RV, boats and commercial applications.

The Century K3150-1 Automotive battery charger has features found on most commercial chargers at a price that cant be beat. A 250 amp 12v engine start helps start stubborn Engines and a 60 amp high, 40 amp medium and 2 amp low 12v charge settings for maximum range for most batteries. 185 amp start and 60 amp high 6v charge setting for farm and fleet duty. A Low 2 amp setting is ideal for charging 12 volt motorcycle and lawn mower batteries. The Test feature identifies 12V battery and alternator problems, as well as indicates battery state of charge. Charges 6 & 12 volt maintenance free, conventional wet, deep cycle, AGM, and gel batteries used in cars, trucks, farm equipment, RV, boats and commercial applications.

The Century K3151-1 Fleet Automotive battery charger has the power you need at a price that cant be beat. A 225 amp 12v engine start helps start large trucks and commercial engines and a 60 amp high, 40 amp medium 12v charge settings for most batteries. 30 amp 24v charge setting. 160 amp start and 60 amp high 6v charge setting for farm and fleet duty. The Test feature identifies 12V battery and alternator problems, as well as indicates battery state of charge. Charges 6, 12 & 24 volt maintenance free, conventional wet batteries used in cars, trucks, farm equipment, RV, boats and commercial applications.

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers.