001-288-908 Plasma Torch Hand Grip (Trigger On Bottom). Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)

002-244-908 Plasma Torch Safety Trigger. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.

216-082-000 Fan Motor With Leads 240 Volt .20 amps C.W. shaft end. Replaces some older models. 216-086-000, 216-086-010, 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 316-007-300 for Fan blade.

216-086-666 Fan Motor W/ Leads 240 Volt .55 amp C.W. shaft end rotation. Replaces 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 216-082-000 as a possible replacement.

238-285-100 Plasma Torch Assembly

238-285-999 Plasma Torch Head (Old Style Trigger On Top) See 238-456-000 for new style with trigger on the bottom.

238-456-999 TORCH HEAD FOR 238-456-000, 50 Amp ,Replaces 238-285-000, 238-285-100. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B).

244-080-666 244-076-666 Century Rectifier Plasma

245-105-666 Century 2 Ohm 420 Watt Resistor comes with mounting brackets, insulators and mounting harware.

SPDT Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals.

246-219-666 Discontinued See 246-176-666 Run Set-Up Switch 2 Position Rocker SPDT Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals.

246-220-666 Century 5 Position Selector Switch

252-004-666 Century Switch, Air Pressure Service

254-005-666 Century Pre-Regulator (set at 105PSI)

Plasma Torch Handle Assembly, no hardware included. Molded handles only

334-274-100 Trigger Assembly Replaces 334-281-100

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Century / Solar Style Plasma 50 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.
For plasma torch 238-285-100 or 238-456-000. The 334-288-908 replaces 4452, 44520, 334-288-000, 334-288-100, 334-288-500. Used on Century made model numbers: 118-014 (YA5550), 118-015 (Solar 2050, 2050C), 118-016 (82050, 5Z031A, 5Z031B)

Century - Solar Style 50 Amp High Current Plasma Cutting Nozzles (used on 45 50 & 55 amp settings). The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

High Current Extended Plasma Nozzles 50amp 5pk. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Century / Solar Style Nozzle Cap, Extended Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Century - Solar Style 35 - 40 Amp Low Current Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Century / Solar Package of 2 O-Rings for 20/40, 15, 20 and 50 amp plasma cutters. The rubber O-Ring prevents air leaks which cause erratic cutting and cooling.