4735 CHARGE IT! 6/12 Volt Wheel Automotive Battery Charger; 40/20/5/200 Amp - The CHARGE IT! 4735 offers fast, beneficial battery charging and boosting in an economical, space-saving design. It features multiple 12 Volt charging rates for convenience and 200 Amp engine starting assistance. Its slimline design offers easy mobility and convenient storage in crowded shops, while its EZ View control panel enables easy monitoring of service progress from almost any angle.

4745 CHARGE IT! 12/24  Volt Wheel Automotive Battery Charger; 40/20/2/230 Amp - The CHARGE IT! 4745 offers fast, beneficial battery charging and boosting in an economical, space-saving design. It features multiple 12/24 Volt charging rates for convenience and 230 Amp engine starting assistance. Its slimline design offers easy mobility and convenient storage in crowded shops, while its digital display control panel enables easy monitoring of service progress.

DSR124 Schumacher 4/15/80/330A ProSeries Battery Charger Engine Starter 6/12/24 Volt with flash reprogramming and memory saver modes. Delivers 300A (6V), 330A (12V), 250A (24V) Engine Start, powerful enough for SUVs, trucks and large engines. 30<>80A Boost mode quickly brings deeply discharged battery back to life and a 70A Flash Reprogram mode. The Memory Saver mode is for saving vehicle settings while changing the battery. Features include a digital display, LED indicators and push-button controls display volts amps and charge percent. Reverse hook-up protection. Charges Standard, AGM and Gel and deep-cycle batteries.

The ESS6007B Associated Automotive Battery Charger 12V 40Amp/130Amp Boost Intellamatic has Electrical Stability System (ESS™) for re-flashes. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defective. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries (including: Spiral Cell, Orbital™, or Optima™ batteries). Not to mention this charger also has Dead Battery Override Control and it is safe to operate in any weather.

The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

ESS6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

The ESS6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

The IBC6008 Associated 60 Amp 12 Volt Automatic Automotive Battery Charger / Analyzer provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

IBC6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The IBC6008MSK Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008MSK into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

The MIL6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle
Batteries, as well as Spiral Cell, Orbital or Optima Batteries. Quick Disconnect DC Leads change from standard clamps cables to extra long NATO plug. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

The PL3740 marries the best of old school unit control with advanced safety and the ability to properly charge today’s AGM and Spiral lead acid batteries. It provides three operational modes for comprehensive service: battery charging mode, stable power mode and engine start assistance mode.

The PL3740 is a bit of a wolf in sheep’s clothing. It features old school knob control for easy operational set-up, plus it incorporates a simple voltmeter/status LED control panel for easy assessment of operational progress. Yet, underneath that unassuming exterior lies a sneaky fast and sophisticated charging device. Really, it’s the best of both worlds.

Auto charging mode (40A, 15A or 5A), utilizes an advanced, microprocessor-controlled process to deliver an optimal charge to each battery serviced. It features temperature compensation to ensure that each charging sequence is dialed into the needs of each battery. The PRO-LOGIX charging process results in improved battery condition and restored reserve capacity. But, the operator can also run one of several timed charge modes (20-120 min.), similar to what one would see on an older charger. Even during these timed charge modes, voltage and current are tightly controlled, allowing the unit to also be set-up to charge AGM and Spiral Wound batteries, which require different charging parameters than a typical lead acid battery. Plus, with Smart Clamp Technology and numerous safety features, PRO-LOGIX brings unsurpassed safety to your everyday battery charging needs.

PL3760 Solar Pro-Logix 60/40/10/250A 12/24V Intelligent Wheeled Automotive Battery Charger / Conditioner. 12/24V 60A Battery Charger with Stable Power Mode and Engine Start. Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL3760 is the perfect charger to meet the needs of today’s fleet professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL3760.

SC1325 Schumacher 250/40/6/2 Amp Wheeled Battery Charger Starter 6/12 Volt. 6/2 Amp Charge maintain mode. 40 Amp Fast charge. 250A Engine start. Charges standard, AGM, Gel and deep-cycle batteries. 250A Engine Start – powerful enough for SUVs, trucks and large engines. 40A Boost mode – quickly brings deeply discharged batteries back to life. Multi-function battery tester – for battery status and charging system analysis. Microprocessor-controlled – automatically adjusts amperage rate, to charge and maintain batteries. Multi-stage charging – for added precision, safety and battery life. Float mode monitoring – maintains optimum battery charge.

SC1326 Schumacher 275/40/6/2 Amp Wheeled Battery Charger Starter 6/12 Volt. 6/2 Amp Charge maintain mode. 40 Amp Fast charge. 275A Engine start. Charges standard, AGM, Gel and deep-cycle batteries. 275A Engine Start – powerful enough for SUVs, trucks and large engines. 40A Boost mode – quickly brings deeply discharged batteries back to life. Multi-function battery tester – for battery status and charging system analysis. Microprocessor-controlled – automatically adjusts amperage rate, to charge and maintain batteries. 0Multi-stage charging – for added precision, safety and battery life. Float mode monitoring – maintains optimum battery charge with Auto voltage detection.

SC1352 Schumacher 250/125/40/20/6/2 Amp 12/24 Volt Wheeled Automatic Battery Charger Starter Tester provides fully automatic charging of conventional flooded standard, AGM, Gel  type batteries. Auto voltage detection and reverse hook-up protection keep the user protected at start-up. Multi-function battery tester for battery status and charging system analysis. Microprocessor-controlled automatically adjusts amperage rate, to charge and maintain batteries. Multi-stage charging for added precision, safety and battery life. Float mode monitoring maintains optimum battery charge. Desulfation mode extends battery life by cleaning plate surfaces and improving cranking amps.