 |
 |
 |
|
REVOLUTIONARY RUNQUICK™ OIL CHANGE SYSTEM
The new VP87 pumps optimize the revolutionary RunQuick™ Oil Management System with an extra bottle and a massive backlit, removable window. Good oil is a key ingredient of every evacuation. Clearly view the pump oil to see the condition of the oil and the system. Use only 8 ounces and replace the oil in under 20 seconds, even while the pump is running, without losing vacuum. When it’s time to change the oil, it’s quick, clean and easy. VP87 Fieldpiece 8 CFM RunQuick™ Oil Change Vacuum Pump. Fieldpiece is leading the charge in properly performing system evacuation with its new vacuum pumps with RunQuick™ Oil Change System. These revolutionary pumps make evacuation easier and faster.
Leading the Charge. On-the-fly oil change in seconds. In-line four port manifold for easy access. Backlit oil reservoir to view condition of oil and system. Anti oil-suck-back keeps oil out of gauges and system. Simple-to-use gas ballast with LED indicator. Water resistant to withstand direct rain. 15 micron ultimate vacuum. Sturdy base to stay upright.
Good oil is a key ingredient of every evacuation. Clearly view your pump oil through the huge oil reservoir window to see the condition of the oil, and the system. When it’s time to change the oil, it’s quick, clean, and easy. With the RunQuick oil change system you can replace the oil in under 20 seconds, even while the pump is running without losing vacuum. Plus the extra wide base helps prevent tipping and spilling oil. Four in-line ports give you tidy hose routing for three different size hoses. Place the cord on the handle for tangle-free storage and easy hoisting.
RunQuick™ Oil Change System allows oil changes on the fly - no need to turn off the pump and you won't lose vacuum.
Durable, sturdy pumps with a strong base and a small footprint that eliminate spills. Easy to use hose valve ports that keep hoses in line and easy to work around. Massive back-lit oil reservoir lets you clearly see the condition of the oil and the operation of the system and new removable window for cleaning.
Power
|
95 to 130 VAC @ 60 Hz
|
Stages
|
2
|
Displacement
@ 50Hz
|
-
|
Displacement
@ 60Hz
|
8 cfm
|
Horsepower
|
3/4 HP Brushless DC
|
RPM @ 50Hz
|
-
|
RPM @ 60 Hz
|
2500 (VP87)
|
Ultimate
Vacuum
|
15 Microns
|
Intake Ports
(Male Flare)
|
(1) 1/4”, (2) 3/8”, (1) 1/2”
|
Oil Capacity
|
8oz (237mL)
|
Dimensions
|
7.9" x 11.7" x 16" |
Shipping
Weight
|
27 lbs without oil
|
 Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
- 8 CFM flow rate with 15 microns ultimate vacuum
- ¾ HP DC motor for power-to-weight and low voltage operation
- RunQuick™ Oil Change System offers on-the-fly oil changes in seconds
- Backlit oil reservoir – allows you to view the condition of your oil and system
- Extra oil bottle storage
- Port Sizes: (1) 1/4”, (2) 3/8”, (1) 1/2” for easy hose connections
- Sturdy base stays upright
- Small footprint – 1,346 cubic inches
- Weighs 27 lbs.
- Quarter-turn gas ballast with LED indicator
- Convenient, removable cord storage
- Error messages: indicate wrong power source or other error
Fieldpiece Vacuum Pump Oil Optimized for top performance
- Low vapor pressure
- Wide temperature range
- Wide mouth bottles
Gallon P/N # OIL128
Quart P/N # OIL32
8oz 3pack P/N # OIL8X3
Specifications
Flow Rate: 8CFM
Oil Capacity: 8oz (237mL)
Oil Compatibility: Fieldpiece Vacuum Pump Oil (Highly refined and optimized for proper sealing and lubrication)
Fieldpiece part numbers: OIL8X3, OIL32, OIL128
Oil Backlight: Blue LED
Oil Drain: Ball valve
Port Sizes: (1) 1/4”, (2) 3/8”, (1) 1/2”
Compressor: Rotary vane, two stage
Motor: 3/4 HP Brushless DC
RPM: 2500
Power Source: 120 VAC @ 60 Hz 1 phase
Nominal Current Draw: 6.0 AAC
Ultimate Vacuum at Input Ports: 15 microns
Dimensions: 7.9 inch x 11.7 inch x 16.0 inch (201 mm x 296 mm x 406 mm)
Weight: 27 lb / 12.4 kg
Operating Environment: 30°F to 122°F (-1.1°C to 50°C)
|
|
|
|
|
|
|