The 42170 Robinair Mini Split Installation Service Tool Kit is designed to be dedicated specifically for mini-split installation. Features include a single valve manifold gauge, dedicated specifically for Mini-Split installation and service applications. 2 Custom length high pressure hoses, 1 18" ¼" quick seal x ¼" FFL standard blue hose & 1 36" ¼" quick seal x ¼" FFL standard yellow hose, eliminates up to 20% of unnecessary charge volume compared to longer length hoses. Eccentric cone flaring tool produces a rolling action for uniform flare walls, which are ideal for mini-split R410A flares.
OTC 4503 Double Flaring Tool Kit - Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees). Includes five adapters 3/16" through 1/2" (4.8mm through 12.7mm).
OTC 4504 Bubble (I.S.O.) Flaring Tool Kit - Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems. Includes four dies: 4.75, 6, 8, and 10mm adapters. Forged steel yoke, flaring bar, and all the adapters needed for ISO bubble flaring. The most economical “Bubble” flare tool to date. Housed in a blow-molded storage.
51515 Titan 1/4 in. Brake Line Double Flaring Tool. Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing. Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle. Handle can be removed if you prefer to use in a bench vise. SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 1/4-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles.
51535 Titan 3/16 in. Brake Line Double Flaring Tool. Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing. Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle. Handle can be removed if you prefer to use in a bench vise. SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles.
71202 Mastercool Hydra-Flare & Yoke Assembly (Blue) Provides secure connections to components and Lines. For 72XXX Series Tool.
71676 Mastercool Hydraulic Flaring and Expanding 10 Head Kit
Use in automotive air conditioning service to create single or double flares. Rugged forged steel slip-on yoke and hardened flaring bar. Chrome finished flaring cone forms better flares with less effort. Positive grip flaring bar eliminates tube movement. Easy operation with professional results. 1 year warranty.
Designed for single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees). Includes swage adapters for 4mm through 22mm". Chrome swivel, made of alloy steel reduces friction. Forged yoke made of heat-treated steel.
Replacement Bar for FS275 (7/16'', 1/4'', 1/8'', 3/16'', 5/16'', 3/8'').
Replacement Short Bar for FS275 (1/2'', 5/8'', 3/4'').
Replacement Yoke Assembly for FS275.
Replacement Metric Flaring Bar for FS275M (4, 6, 8, 10, 12mm).
Replacement Metric Flaring Bar for FS275M (14, 18, 22mm).
45° Flaring Tool for 3/16" to 5/8" O.D.
45° Flaring 5/8'', 3/4'', 7/8'', 1-1/8'' O.D.
Faceted, hardened steel, chrome-finished cone rolls out perfect 45° flares above die block, and automatically burnishes flare face reducing the need for deburring. Original wall thickness is maintained at base of flare. New slip-on yoke permits use in tight quarters, where there is little space between nut and tube end.
Faceted, hardened steel, chrome-finished cone rolls out perfect 45° flares above die block, and automatically burnishes flare face reducing the need for deburring. Original wall thickness is maintained at base of flare.
FT525 CPS 45° Universal Flaring Burnishing Tool 3/16" to 5/8" (4.75 to 16mm) O.D.
R-410A Clutch driven flaring tool with ratchet and case for 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4" O.D. tubing. R-410A Eccentrically Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure R-410A systems. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Rugged polyethylene storage case included.
Standard imperial clutch driven flaring tool with ratchet and case for 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4" O.D. tubing. Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling. Clutch Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure systems. Provides an exact amount of flaring torque with break away clutch system. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Innovative 3/8" square drive incorporated directly in yoke handle for use of ratchet. Rugged polyethylene storage case included.
Standard metric clutch driven flaring tool with ratchet and case for 6, 8, 10, 12, 15, 16 & 18mm O.D. tubing. Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling. Clutch Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure systems. Provides an exact amount of flaring torque with break away clutch system. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Innovative 3/8" square drive incorporated directly in yoke handle for use of ratchet. Rugged polyethylene storage case included.
Yoke Assembly For FT195.
FT195 - 1/2", 5/8", 3/16", 1/4", 5/16", 3/8", 7/16" Flaring Bar
Compressor Cone for FT195.
Wing Nut for Flaring Bar for FT195
Yoke Assembly for FT500
Die Holder Assembly for CPS FT500
Die Holder Assembly for CPS FT500M
Yoke Assembly For CPS FT525
Tube Holding Assembly For CPS FT525
Flaring Cone for CPS FT525
FTX800B410 CPS FT800FN - R-410A Imperial Flaring Bar
JB-BACKPACK1 JB Industries JB Backpack
JB-Toolbag1 JB Industries JB Tool Bag
MSKIT1 JB Industries Mini Split Kit 1/4". Includes BACKPACK1 - JB Heavy Duty Tool Back Pack, 22500 - Patriot™ manifold with R-410A gauges, CCLS-60 - 1/4" KOBRA® UL approved Secure Seal hose set, T30605 - Metric (2-8mm) & Imperial (5/64 - 1/4") hex key set, T30600 - Ratcheting eccentric cone flare tool, TRQ1080 - Torque wrench set with 6 spanner heads (10 - 80 N-M), A32525N - 1/4" Female x 1/4" SAE Valve core remover with side port, SHLD-P4 - SHIELD™ locking cap R-410A (4 pack), A31565 - 5/16" Female x 1/4" SAE brass adapters (2 included), NFT5-4 - 1/4" Brass caps (5 included).
MSKIT2 JB Industries Mini Split Back Pack Kit 5/16" Fittings. Includes BACKPACK1 - JB Heavy Duty Tool Back Pack, 22505 - Patriot™ manifold with R-410A gauges, CCLS5-60 - 1/4" KOBRA® UL approved Secure Seal hose set, T30605 - Metric (2-8mm) & Imperial (5/64 - 1/4") hex key set, T30600 - Ratcheting eccentric cone flare tool, TRQ1080 - Torque wrench set with 6 spanner heads (10 - 80 N-M), A32535N - 5/16" Female x 5/16" SAE Valve core remover with side port, SHLD-E4 - SHIELD™ locking cap R-410A (4 pack), A31665 - 5/16" Male x 1/4" Female SAE brass adapters (2 included), NFT5-5 - 5/16" Brass caps (5 included).
MSKIT3 JB Industries Basic Mini Split Kit
RT175001 JB Industries Torque Spanner Set
Professional Flaring Tool For producing precision 45° single flares on copper tubes, Certified for R410A. Set includes flaring tool with mold, plastic case. O.D. Tube Sizes: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"
Professional Flaring Tool For producing precision 45° single flares on copper tubes, Certified for R410A. Set includes flaring tool with mold, plastic case. O.D. Tube Sizes: 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
The RT26036 JB Industries RoFlare Swing Release Flare Tool makes precision production of 45° single flares on copper, brass, aluminum and soft steel tubes a breeze. For tube sizes 45° 3/16" - 1/4" - 5/16" - 3/8" - 1/2" - 5/8" . Perfect for refrigeration work. The tool lets you create 45-degree single flares on soft- and hard-drawn copper tubing, plus brass, aluminum, and thin-walled steel piping. You'll save on fittings, soldering, and labor with this one. The universal coupling with spherical locking device is great for simple, rapid changeover of your cone and expander pin. 45° and 180° double flares are also possible when used in conjunction with ROFLARE double-flare inserts; "Multiblock" multi-clamping facility and secure eccentric quick tensioning device for tubes. Hardened clamp jaws and cone. Automatic self-centering.
For production of precise 45° single flares and precision sockets on copper, brass, aluminum, and precision steel tubes. Set includes basic tool, 45° cone, expander pin, internal and external deburrer, tube cutter, and plastic case. For 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8" O.D. Tubing.
RT99017 JB Industries Replacement Clip & Axle For RT70020 RT70021
Universal flaring tool for 3/16'', 1/4'', 5/16'', 3/8'', 7/16'' OD (nominals 1/8'', 1/4'', 3/8'', and 1/2'').
T30600 JB Industries Ratcheting Flaring Tool Eccentric Cone Type (3/16" to 3/4") - Eccentric Cone Type (for 3/16" to 3/4") - Eccentric cone flaring for tubes with an OD of: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4". With an internal clutch that will prevent you from over-torquing the flare. This is the ideal tool for servicing R410A mini splits.
T30600-G JB Industries Flare Gauge T30600 Ratcheting Flaring Tool
The TLB410A CPS R-410A Universal A/C Tool & Adapter Kit was designed for the installation and service of Mini-Split & Central A/C systems utilizing R410a refrigerant. The kit includes a 2 valve R410a aluminum manifold with 60" ball valve hoses, a clutch type flaring tool for tube sizes from 3/16" to 3/4", a 6-in1 metric torque wrench set for setting R410a flare nuts to proper torque, a set of imperial and metric hex key sets, a 5/16" valve core removal tool which allows for core replacement under pressure, a complete set of straight and 45 degree swivel flare adapters for access to the units high and low side fittings, 5/16" flare caps for convenience and a free tool bag to carry it all in. Read more here...
CPS PRO-SET SAE torque wrench set for R-410A installations. Professional interchangeable jaw torque wrench set ensure compliance with OEM torque settings for high pressure R-410A systems. Corresponding settings are clearly marked on torque wrench in Inches. Provides consistently accurate readings and rugged, trouble free performance. Includes six interchangeable jaw sizes (5/8”, 11/16”, 13/16”, 15/16”, 1-1/16”, and 1-5/16”). Includes storage case for long-term protection and is covered by a 1 year product warranty from CPS.
CPS PRO-SET metric torque wrench set for R-410A installations. Professional interchangeable jaw torque wrench set ensure compliance with OEM torque settings for high pressure R-410A systems. Corresponding settings are clearly marked on torque wrench in Netwon Meters (10-75Nm). Provides consistently accurate readings and rugged, trouble free performance.
