50306-K Cooper Air/Oven Probe w/Clip 600°F Type K Thermocouple
Air/Oven Probe w/Clip 600°F Type K Thermocouple: Air probe that is versatile for either oven or freezer montoring. Probe features a SS shield that protects sensor from touching the inside wall of an oven that could convey a false air temperature. Clip for easy mounting and durable cable that will withstand most door closures. Available in Type K only.
50319-K Cooper Ceramic Tip Surface Probe 90° Right Angle Shaft Type K Thermocouple
Ceramic Tip Surface Probe 90° Right Angle Shaft Type K Thermocouple: Provides fast readings on any flat or uneven surface. High temperature capability allows for use on hotter surfaces such as grills, molds, dies, and barrels. Due to the thermocouple sensor being exposed, the probe should only be used on a clean surface with possibly a dab of oil or grease to aid in heat transfer. Durable Phenolic handle. Available in Type J, K, and T.
50334-K Cooper DuraNeedle Probe Vitron® Cable Type K Thermocouple
DuraNeedle Probe Vitron® Cable Type K Thermocouple: Probe has a 4" DuraNeedle with a welded-tip design that produces a fast response. Cable is a patented design that is reinforced with Kevlar® and a metal braid and has a fluoroelastmer outer jacket. Available in Type K only.
ATA1 Fieldpiece T/C-Bead with Clip
ATA1 Fieldpiece K-Type Thermocouple with Alligator Clip - The ATA1, K-type thermocouple can clip to HVACR equipment for convenient placement and hands free testing. Clip to condenser fins for accurate outdoor dry bulb measurement – great for finding target superheat. Clip to evaporator filters for indoor dry bulb – great for finding target evaporator exit temperature. Clip to supply vents for dry bulb supply temperature. The ATA1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. HVACR technicians find the ATA1 extremely helpful when data logging or anytime an extra hand is needed. The wrap-tab allows the thermocouple wire to conveniently store on the plug. Just wrap the excess wire around the wrap-tab. No more tangled messes in your tool bag.
ATAF1 Fieldpiece T/C-HiTemp with Clip
ATAF1 Fieldpiece High Temperature K-Type Thermocouple with Alligator Clip - The ATAF1, K-type thermocouple clips to HVAC/R equipment for convenient placement and hands free testing. Fiberglass insulation withstands high temperatures up to 900°F. Clip it to residential and commercial ovens, broilers, boilers or any other high temperature application.
ATB1 Fieldpiece T/C-Bead
ATB1 Fieldpiece K-Type Bead Thermocouple - The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 400°F. Using the included Velcro strap allows for easy pipe temperature measurements, though not as accurately as the ATC1 Pipe Clamp Thermocouple. Use the ATB1 for outdoor dry bulb temperatures when finding target superheat. The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
ATC1 Fieldpiece Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning
ATC1 Fieldpiece Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning - The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 3/8” to 1 3/8” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
Discontinued - see FPITC24
ATC1R Fieldpiece T/C-Clamp (1/8 - 3/4")
ATC1R Fieldpiece Pipe-Clamp Thermocouple 1/8” to 3/4” for Refrigeration - The ATC1R, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 1/8” to 3/4” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1R for most refrigeration units. The ATC1R can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
ATC2 Fieldpiece Large Pipe-Clamp Thermocouple 3/8” to 2 1/4” for Air Conditioning
ATC2 Fieldpiece Large Pipe-Clamp Thermocouple 3/8” to 2 1/4” for Air Conditioning - The ATC2, K-type, pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8” to 2 1/4” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC2 for most A/C units. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
Discontinued - see FPITC48
ATEXT10 Fieldpiece T/C-10' Extension
ATEXT10 Fieldpiece 10 Foot Extension Cable (K-Type Thermocouple) - The ATEXT10 is a K-type thermocouple extension cable designed to give you that extra reach you need when measuring temperatures. It's 10' in length and has a female k-type port on one end and the male plug on the other. It's great for use with rigid thermocouples.
ATWB1 Fieldpiece T/C-Wet Bulb with Clip
ATWB1 Fieldpiece K-Type Thermocouple Wet Bulb (sock) with Alligator Clip - The ATWB1, K-type wet bulb thermocouple can clip to HVAC/R equipment for convenient placement and hands free testing. Wet the durable sock and clip to evaporator filters for indoor wet bulb – great for finding target evaporator exit temperature. Clip to return vents for indoor wet bulb temperature – great for target superheat calculations. The ATWB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. HVAC/R technicians find the ATWB1 extremely helpful when data logging or anytime an extra hand is needed.
