3406 ATD Tools 1” Dial Thermometer 0º to 220º F

Digital Thermometer -58ºF to 572ºF 4-3/4” Stainless steel stem 4-3/4”, Large LCD readout, Temperature range: -58ºF to 572ºF (-50ºC to 300ºC), Reads in both ºF and ºC.

This new infrared thermometer features a double injection housing, found only on the highest quality units. The front panel controls allow switching the F and C, backlight and laser on/off without flipping the handle. Lower quality units can not switch the F, C, or Laser from the front panel, as the controls generally reside beneath the handle in the battery compartment. Temperature Range: -58 to 1022F (-50 to 500C). Carrying case included.

The Mastercool 52227 Pocket Infrared Thermometer offers accurate non-contact temperature measurement in a compact and easy to use size. With features like, temp range of -67° to 428° F, adjustable emissivity, back-lit LCD display and min / max capture mode.

Dial Thermometer Easy-to-read -40° Degrees To +160 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

Dial Thermometer 0 Degrees To 220 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

10945 Robinair Dial Thermometer 1-3/4" Face 0-220° F

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly.

Thread Chaser For Use 18560 & 18561 Access Valve Core Remover / Installer. For use with No. 18560 or 18561, value core remover / installer. This thread chaser actually repairs damaged threads on valve cores in the service line, without releasing refrigerant into the atmosphere.

For use with No. 18560 or 18561, value core remover / installer. this extractor lets you remove damaged cores in the service line while the system is fully charged, without releasing refrigerant into the atmosphere.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of vacuum and charging.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve.

Robinair Thermometer Easy-to-read -40° to + 70°C 1" dial face. Pocket-clip carrying case for protection and easy access.

Use this handy economical and accurate kit to Measure Natural gas or LP gas pressure across appliance manifolds. The hose connects with a pipe thread adapter or simple rubber hose connection, which makes it easier to use than a manometer. The diaphragm gauge is calibrated in inches of water column, also shows ounces per square inch.

Use this handy economical and accurate kit to Measure Natural gas or LP gas pressure across appliance manifolds. The hose connects with a pipe thread adapter or simple rubber hose connection, which makes it easier to use than a manometer. The diaphragm gauge is calibrated in inches of water column, also shows ounces per square inch.

This digital thermometer gives you full-feature capabilities in a case which is small enough to fit in your shirt pocket. A wide temperature range and highly accurate readings make it useful for a variety of applications. Accurate readings from -58° F to 302° F

Digital Thermometer -58 Degrees To 302 Degrees F -50 Degrees C To 150 Degrees C

Robinair A/C System Performance Calculator provides instant A/C performance tests on a vehicle system and produces figures which guide the technician through step by step diagnosis of the Automobiles Air-Conditioning system. Its small size make it easy to suspend from hood latch or attach to your manifold gauge set.

Refrigerant Pressure Temperature Chart For 41600 Series Manifolds or Universal Application. Lists 12 refrigerants including R-12, R-22, R-134A, R-410A, R-502, R-401A, R-401B, R-402A, R-402B, R-404A Fits conveniantly on the rear of 41400, 41600, 40100 series gauges with protector.

The Mastercool 52225-A Dual Temp Plus Infrared Thermometer (30:1) features both infrared and contact thermometer technologies. Includes programmable HI / LO alarm and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack and wire thermocouple. Includes Free 52220.

Great new product! The # is the ideal tool for easy and accurate measurement of RPM in almost any environment.

The Mastercool 52225-A Dual Temp Plus Infrared Thermometer (30:1) features both infrared and contact thermometer technologies. Includes programmable HI / LO alarm and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack and wire thermocouple.

The MiniTemp MT4 is the ideal introduction to handheld noncontact thermometers for technicians. The MiniTemp MT4 unit features the popular single dot laser sighting system and the large temperature display provides current and maximum readings together while scanning, all in a conveniently sized handheld tool. The MiniTemp MT4 provides great ways to solve common temperature measurement problems, and are small enough to fit in your pocket!

Autopro St25 Infrared Thermometer (-25:999F)

Pocket Infrared Thermometer -27º to +428ºF  The TIF 7201 Pocket Infrared Thermometer offers accurate non-contact temperature measurement in a compact and easy to use size.

An infrared thermometer measures temperature by sensing the magnitude of radiated energy at infrared frequencies. Using this data and the actual temperature of the detector, the thermometer calculates the temperature of the surface that emitted the energy. To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The 7610 TIF has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The device has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The device has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

PDT550 Universal Enterprises Pen Style Digital Thermometer Measures from: -58 to +571º (-50 to +300ºC), waterproof, built in magnetic mount, minimum and maximum temperatures, HOLD freezes the current temperature reading, easy access battery compartment, enhanced accuracy of digital circuitry. Includes battery, and multipurpose probe cover. Three year limited warranty.

The GT1, GT2 and GT3 are designed to test the integrity of new installations for pressure leaks. Available with either a 3/4" or 1" FPT brass bell. Simply connect the test assembly, pressurize the system using the supplied access port and monitor the easy-to-read 3 1/2" / 80mm gauge for potential pressure drops that would indicate a leak.

The GT1, GT2 and GT3 are designed to test the integrity of new installations for pressure leaks. Available with either a 3/4" or 1" FPT brass bell. Simply connect the test assembly, pressurize the system using the supplied access port and monitor the easy-to-read 3 1/2" / 80mm gauge for potential pressure drops that would indicate a leak.

Electronically measure humidity and temperature, Features data-hold and relative functions. Humidity range 10 to 95% RH, Temperature range -4 to 140°F (-20 to 60°C), Display Resolution, 0.1°F / 0.1°C / 0.1%RH, Wet bulb and dew point temperature readings, Data-hold and relative function, Dual LCD with bar-graph indication, Includes soft carrying case includes batteries.

Evacuation core remover and superheat thermometer set. The combo set calculates super heat from -58º to 302º degrees Fahrenheit with the temperature/pressure tool. Core remover tool has quarter turn ball valve shut off and port. Both items have o-ring seals.

The SH-35N Digital Pressure/Temperature Gauge provides a wireless connection to smartphone devices, allowing for system testing without loss of refrigerant—hoses and manifolds not necessary.  The free download of the SH-35N app wirelessly calculates and displays system pressure, temperature, superheat and sub-cooling in an easy-to-read, color format. Sealed touch buttons protect against dirt and dust and includes a carrying case. Test system without losing refrigerant, hoses and manifolds are no longer necessary.

This compact unit measures from -58° to 392°F (-50° to 200°C) and triggers an alarm at the high and low programmed temperatures. No calibration required, reads °F/°C switchable, Features Data hold function, Key tone for operation confirmation and maximum/minimum temperature memory. Includes a foldaway stand and performs an automatic self test after battery installation for dependability.

A step above the standard pocket thermometer the TM50 is packed full of features, including a user selectable temperature alarm, a countdown timer, Min/Max, °F/°C selectable and memory functions. The unit incorporates a highly accurate stainless steel 96mm puncture probe with a 4ft/122cm cord. Temperature range is -58° to 500°F

Digital pocket thermometer with stainless steel probe and pocket clip. Temperature Range: -58° to 302°F / -50° to 150°C User selectable

The CPS TMINI12 infrared thermometer provides instant temperature measurement over a wide range of applications. The unit offers simple one-handed operation, laser point sighting, a backlit display, °C/°F select ability and an automatic power off feature. Use the TMINI12 to quickly measure temperatures of registers, ductwork, furnaces, evaporators, condensers, compressors, relays, manifolds, radiators, exhaust systems, thermostats, bearings and more. 12:1 Ratio -76°F to 932 °F With "K" type input for optional probes.

The CPS TMXKBEAD is a standard K-type bead probe ideally suited for getting fast results when measuring temperature in a variety of media. This 36" long (1 meter) probe provides accurate readings in less than 5 seconds over the range of -58ºF to 400 ºF (-50 ºC to 204 ºC) and is compatible with any other instrument with a
K-Type input.

The CPS TMXSK90 is the fastest and most accurate handheld K-type surface probe providing accurate readings in less than 5 seconds. The sensor is made from flat-spring ribbons of thermocouple material for contact on uneven surfaces. The exposed junction provides for fast response and is compatible with any other instrument with a K-Type input.

This unique pocket-sized, battery operated, micro processor based meter is designed to quickly measure humidity, dry bulb, dew point and wet bulb. You old timers will appreciate this, No need to whirl the meter or refer to a chart for results. The micro processor based psychrometer provides a digital reading on the LCD display. The sensor parts are protected by a rotatable cap.

Calibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.

43150 Robinair –58° To 302° F In-Stream Superheat Thermometer / Valve Core Removal Tool Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the refrigerant directly. Connects directly to a standard 1/4" flare access fitting. Remove, test and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant, fast accurate measurements ensure to the degree temperature measurements for superheat or subcooling. A must have tool for the serious refrigeration engineer.

The TIF3320 Series Thermocouple Thermometers easily take differential temperature readings with the dual type-K thermocouple probes plus non-contact surface temperatures using the IR thermometer probe. Use contact differential temperature measurements (T1-T2) to display HVAC Superheat measurements. Display temperature differentials between both contact and IR temperature readings (T1, T2, T3). Rugged design that is easy to grip and hold. Use the IR thermometer probe to measure non-contact surface temperatures up to 1022 °F and beads to 2501°F.

The TIF3420 easily takes differential pressure readings with the dual input pressure manometer. Use to measure differential, absolute and static pressures in most HVAC systems. Chose the units of measure your most comfortable with – 11 selectable units of measure to choose from. Store MIN/MAX and AVG readings. Rugged design that is easy to grip and hold. Large easy to view LCD display is easy to read from a distance. Zero function lets you correct for any offsets in readings or measurements.

The GT1, GT2 and GT3 are designed to test the integrity of new installations for pressure leaks. Available with either a 3/4" or 1" FPT brass bell. Simply connect the test assembly, pressurize the system using the supplied access port and monitor the easy-to-read 3 1/2" / 80mm gauge for potential pressure drops that would indicate a leak.

The SH450 Total Systems Analyzer is quite possibly the most versatile tool you will ever own. Measure pressure from -14.7 to 725 PSI, automatically calculate and display superheat, sub cooling, relative humidity, wet bulb, dry bulb and dew point readings in seconds. Display temperature differential between any 2 of 4 independent temperature channels. Record and display min/max readings for any channel at the touch of a button. Scan all 4 temperature channels simultaneously. The SH450 is self contained in a rugged polyethylene case with plenty of room to fit all your accessory probes.

Professional digital sound level meter designed to measure noise levels from 35 to 130dB. The unit incorporates a large LCD, maximum hold function, Over and Under range indicator, peak and average response settings and A-C weighing for checking compliance with standard safety regulations. Applications include the monitoring of HVAC/R compressors, blowers, health and safety requirements, environmental quality issues, offices, factory machinery, airports, auditoriums and studio acoustics.

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly. For use with CPS TLVC and CPS TLVCS.

Rugged 4-Station Thermo-Psychrometer that includes three probes (Air, Velcro Pipe Stap, and General Purpose) adaptable to accommodate all your temperature, humidity, dry/wet bulb and dew point measurements.

Rugged 4-Station Thermo-Psychrometer that includes three probes (Air, Flexible Touch, & Pipe Clamp) adaptable to accommodate all your temperature, humidity, dry/wet bulb and dew point measurements.

4-Station Thermo-Psychrometer.  Designed in a rugged polyethylene case the TM350 is engineered to provide laboratory accuracy in rough filed conditions.  Includes 3 probes (Air Probe, Pipe Clamp Probe, and a Velcro Strap Probe).

The TM360 is a professional grade thermo-psychrometer adaptable to accommodate all your temperature, humidity, dry/wet bulb and dew point measurements. The unit incorporates 4 discrete temperature ports all capable of min/max and memory functions including temperature differential between any 2 of the 4 available ports. Press the SCAN key and the display will alternate between all 4 ports in three second intervals providing continuous monitoring of multiple probe points during critical system diagnosis. A dedicated special purpose port accommodates an optional state of the art silicon humidity transducer probe for fast and accurate measurements during superheat calculations.

TMAP CPS Analog Pocket Thermometer 1" (0 to 220°F)

Analog Pocket Thermometer (-10 to 100?C)

Air Probe -40 to 221° F TM150 TM250 TM350 TM360 SH450 Series

DISCONTINUED SEE CPSTMX3CAccessory Pipe clamp on probe (15ft / 4.5m Lead) Temperature range of -40° F to 221° F / -40° C to 105° C . Fits: TM150, TM250, TM350, TM360 & SH450 Series

TMX2FP Flexible Touch Probe 15ft -40 to 221° F

TMX2G General Purpose Probe, 15ft / 4.5m lead, Probe Type: Surface / Air / Liquids. Common uses are copper pipe, ambient air, RH wet-sock method. Response time is 6 seconds. Temperature Range of -40˚F to 257˚F / -40˚C TO +125˚C. TM150, TM250, TM350, TM360 & SH450 Series.

TMX2GA General Purpose Air Probe. 15ft / 4.5m leads, Probe type: Air / Surface / Liquids, Common uses are, Ambient air,  Ducting, Registers, Air movement across condensers. Response time is 12 seconds and the temperature range is -40˚F to 257˚F / -40˚C TO +125˚C.

TMX2P Puncture Probe. 15ft / 4.5m leads. Probe Type Surface / Liquids (shaft only). Common Uses Internal temperatures of frozen materials / Air ducts. Probe Shaft Length of 6 in. Response time of 6 seconds. Temperature Range of -40˚F to 257˚F / -40˚C TO +125˚C, Fits: TM150, TM250, TM350, TM360 & SH450 Series

TMX2RH CPS Relative Humidity / Dew Point Probe TM250 -40 to 194° F

Velcro Surface Probe, All probes have 15ft / 4.5m leads, Surface probe for general applications. Common uses are surface temperatures of copper piping. Response time is 15 seconds and a range of -40˚F to 257˚F / -40˚C TO +125˚C. For TM150, TM250, TM350, TM360 & SH450 Series

Clamp-On Surface Temperature Probe 3/16" to 1.25" Jaw Opening For TM150, TM250, TM350, TM360 & SH450 Series. All probes have 15ft / 4.5m leads. Probe Type, Surface. Common Uses, Surface temperatures of copper piping from 3/16" (5mm) to 1 1/8" (29mm), Response Time of 12 seconds and a range of -40˚F to 221˚F /-40C TO +105˚C.

Power Supply for TM350 Series Only

The TMX3RH is a high accuracy silicon device for the measurement of relative humidity and dry bulb temperature. Both sensors are integrated in one small silicon chip, factory calibrated and conditioned to give accurate and fast reponse. The TM360 uses this accurate data to compute the wet bulb and the dew point temperatures using the latest software algorithms.

TMX3WB CPS Wet Bulb Socks 2" (6 Pieces)

The fastest and most accurate handheld K-type surface probe providing accurate readings in less than 5 seconds. The sensor is made from flat-spring ribbons of thermocouple material for contact on uneven surfaces. A ribbed handle for grip and a 3 foot coiled lead for durability and long reach.

2790 FJC Inc. 1-3/4" Dial Thermometer (0° to 220°F). 1 3/4" Dial Thermometer: This thermometer provides readout for temperatures from 0 to 220 degrees Fahrenheit. With the 1-3/4" face and over sized numbers this unit is easy to read and it has a pocket holder with a clip.

2792 FJC Inc. 1" Dial Thermometer (0° to 220°F). 1" Dial Thermometer: This thermometer provides readout for temperatures from 0 to 220 degrees Fahrenheit. With the 1" magnified lens this unit is easy to read and it has a pocket holder with a clip.

2795 FJC Inc. Digital Thermometer -58°F To 302°F. This unit is easy to use, fast and accurate, with auto shutoff and displays readings in either Fahrenheit or Celsius. Includes battery and pocket holder with clip.

Non-Contact Thermometer

3.5" General Purpose Thermistor Puncture Probe: General purpose puncture probe used to measure temperatures by insertion or immersion.

1236-17-1 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath 25°F-125°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic and pocket clip.. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.

0.5" Air/Surface Thermistor Probe: Thermistor air probe with extra-long cord length.

12" Wall Thermometer -40/120°F/°C w/Humidity Scale: 212 Series Wall Thermometers are 12” / 30.5 cm in diameter and available for a variety of requirements that increases employee awareness while monitoring temperature.

12" Cooler/Freezer Thermometer -10/80°F w/Humidity Scale: The 212-159 Cooler/Freezer thermometer is brightly colored and features a 12"(30.5cm) diameter. It has a HACCP reference color-zoned dial and a large black pointer for ease in viewing. This oversized wall thermometers allow easy monitoring of temperatures in critical food-related locations.

4" Stem Thermometer 3" Back Flange 0/220°F: The 2225-02 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

4" Stem Thermometer 3" Back Flange -40/160°F: The 2225-03 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

4" Stem Thermometer 3" Back Flange 200/1000°F: For those applications where a wide and high temperature range is needed, the 2225-05 is perfect. With a temperature range of 200° to 1000°F this thermometer can be used in burners, cookers, heaters and manifolds. The 2225-05 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

2" Dial 8" Stem Thermometer w/Clip Glass Lens NSF 0/220°F/°C: The 2238 series has a tempered glass lens and features a stainless steel vessel clip. The 2238-06 is perfect for monitoring dough through the yeast-kill process. Yeast becomes dormant at 63°F / 17.2°C and works best between 80° and 95°F / 26.7° and 35°C. It is NSF certified and features a stainless steel clip.

2238-14-3 Cooper 2" Dial 8" Stem Thermometer With Clip Glass Lens NSF 50/550 °F/°C: The 2238 series has a tempered glass lens and features a stainless steel vessel clip. Model 2238-14 is perfect for monitoring dough through the yeast-kill process and features a higher range then the 2338-06 of 50° to 500°F/°C.

9" Stem Thermometer 3" Back Flange -40/160°F: The 2255-03 features a 2" dial and 9" stainless steel stem. It features a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

255-06-1 Cooper 6" Wall/Storage Thermometer -60/120°F/°C. Wall thermometer for medium storage areas, refrigerators and walk-in freezers. Hangs on an adjustable bracket and mounting hardware. Black printing on white dial face. White polystyrene. Bimetal coil movement. 5" Diam. -60°F to +120°F temperature range.

Refrigerator/Freezer Thermometer NSF HACCP SS -20/80°F/°C: The 25HP HACCP Professional Refrigerator/Freezer thermometer hangs or stands. It features a HACCP reference dial and is NSF certified.

Twin2Pack Refr/Frzr Thermometers NSF HACCP SS -20/80°F/°C: Stainless Steel frame/bezel either hangs or stands, HACCP guidelines, 1 3/4" dial.

Holding Cabinet Thermometer NSF HACCP SS 100/175°F/°C: The 26HP Hot Holding Cabinet Thermometer can hang or stand, is NSF certified and features a HACCP reference dial and HACCP guidelines.

Grill Surface Thermometer NSF 100/600°F/°C: The 3210-08 Grill Thermometer features unique grips for easy removal from the hot grill surface. It features a HACCP reference dial and is NSF certified.

Meat Thermometer NSF HACCP 130/190°F/°C: The 323 Meat Thermometer is NSF certified and includes a 6"/15.2cm stem. It includes HACCP minimum temperatures for poultry, ground beef & pork, and fish.

EconoTemp 323 Type K Thermocouple Instrument NSF -40/500°F/°C: The EconoTemp 32311 thermocouple thermometer was designed primarily for the foodservice industry. The slim line design fits nicely in the palm of your hand and will provide a good ergonomic grip. The addition of the molded rubber boot provides impact and water resistance. Rubber boot also has molded tabs on the side to hold and store most needle probes. Micropower design provides 4500 hours battery life.

Deep-Fry Confection Paddle Thermometer Glass Tube 100/400°F/°C: The 329 Professional Deep-Fry Paddle/Confectionery thermometer features a adjustable vessel clip and black easy-to-grip plastic handle. Its non-toxic spirit-filled tube is housed in stainless steel construction.

330-0-1 Cooper Refrigerator / Freezer Tube Type Thermometer NSF -40/120 °F/°C Hook: 330 Lightweight Refrigerator/Freezer thermometer. It features a non-toxic spirit-filled glass hanging tube. The 330 is NSF certified.

335-01-1 Cooper Refrigerator / Freezer Thermometer Horizontal Glass Tube NSF -40/80 °F/°C: 335 Horizontal Glass Tube Refrigerator thermometer features magnifying lens and hangs, stands or permanently mounts. It is NSF certified.

Air Probe Bare Tip w/36" Cable Type K Thermocouple: Bare wire probe that is ideal for air temperatures. Can be used in liquids, but not recommended for food products. Available in Type J, K, and T.

Pipe Clamp Surface Probe Type K Thermocouple: Used for measuring pipe surface temperatures. Can be used on pipes with diameters of .25" to 1.375".

Using an infrared thermometer is the safest way to measure surface temperatures of hot, hard to reach, electrically energized or moving objects. It is commonly used to verify HVAC distribution, check for overheated wires, radiant heat in floors, running motors, insulation, pipes, breakers, and corroded connections. They are also excellent tools for reading ceiling duct temperatures from the floor without a ladder!

Racing Tire Probe .188" depth Type K Thermocouple: Delicate and fast response tip designed to penetrate soft rubber. Available in Type J, K, or T.

Air/Oven Probe w/Clip 600°F Type K Thermocouple: Air probe that is versatile for either oven or freezer montoring. Probe features a SS shield that protects sensor from touching the inside wall of an oven that could convey a false air temperature. Clip for easy mounting and durable cable that will withstand most door closures. Available in Type K only.

Ceramic Tip Surface Probe 90° Right Angle Shaft Type K Thermocouple: Provides fast readings on any flat or uneven surface. High temperature capability allows for use on hotter surfaces such as grills, molds, dies, and barrels. Due to the thermocouple sensor being exposed, the probe should only be used on a clean surface with possibly a dab of oil or grease to aid in heat transfer. Durable Phenolic handle. Available in Type J, K, and T.

DuraNeedle Probe Vitron® Cable Type K Thermocouple: Probe has a 4" DuraNeedle with a welded-tip design that produces a fast response. Cable is a patented design that is reinforced with Kevlar® and a metal braid and has a fluoroelastmer outer jacket. Available in Type K only.

535-0-8 Cooper Cooler Thermometer With Magnet -20/120°F/°C: The 535 Cooler thermometer's magnetic back or self adhesive tabs are perfect for mounting to the underside of refrigerated glass cases. It features a 1.5"/3.4cm dial diameter.

6142-20-3 Cooper Panel Thermometer 2" Dial Front Flange 48" Cap Back Connection NSF -40/60°F/°C: The 6142-20 features a front flange, back connect, flush mount. It has a 2" dial diameter and 48" capillary. It features three (3) .156" diameter mounting holes equally spaced on 2.625" diameter bolt circle. It is NSF certified.

6812-01-3 Cooper Panel Thermometer 2" Dial Back Flange 48" Cap Back Connection NSF -40/60°F/°C: The 6812-01 features a back flange, back connect, surface mount. The back flange has 3.160" diameter bolt circle and projects 1.2" from panel. It has a 2" dial diameter and 48" capillary length.

6812-02-3 Cooper Panel Thermometer 2" Dial Back Flange 48" Cap Back Connection -40/120°F/°C: The 6812-02 features a back flange, back connect, surface mount. The reverse flange has 3.160" diameter bolt circle and projects 1.2" from panel. It has a 2" dial diameter and 48" capillary length.

Pan/Vessel Clip 37-56 for 1/8" Diameter Stem Thermometer: Stainless Steel Pan/Vessel Clip 37-2D for 1/8" Diameter Stem Thermometer

9366 Cooper Stainless Steel Panel / Vessel Clip 37-2B for 1/4" Diameter Stem Thermometer

DFP450W-0-8 Cooper Digital Pocket Thermometer Waterproof 4.5" Stem NSF -40/450°F/°C: Our DFP450W Digital Pocket Test with adjustable Temperature Alarm was specifically designed for the harshest foodservice environments. The Instrument can be programmed to provide a visual alarm (blinking display) once the set temperature is reached. The initial default alarm temperature is 140oF (60oC). Potentially hazardous mercury thermometers are often used to check the extreme water temperature of commercial dish water. Eliminate the risk of a mercury spill; the DFP450W stores the maximum heat registered and is waterproof. Guaranteed Accurate for Life means there is no need of field adjusting of calibration settings and no risk of introducing error into the instrument.

Digital Panel Thermometer 2" Front Flange 39" Cord NSF -40/120°F/°C: The DM120 Digital Remote Panel thermometer features a front flange surface mount and is NSF certified. The removable lens makes battery replacement easy.

Digital Panel Thermometer 2" Back Flange 39" Cord -40/120°F/°C: The DM120S Digital Remote Panel thermometer features a back flange surface mount. The removable lens makes battery replacement easy.

DPP400W-0-8 Cooper Digital Pocket Thermometer Waterproof Pen Style 2.75" Stem NSF -40/392°F/°C: This waterproof digital thermometer is NSF certified and has automatic shut-off. Designed with anti-microbial additive to avoid bacteria growth and reduced stainless steel tip for a quick response time.

DPS300-01-8 Cooper Digital Pocket Thermometer Swivel Head 5" Stem -40/302°F/°C: Most Digital Pocket Tests in today’s market either don’t have a swivel head, or swivel 90° or less. The unique DPS300-01 allows you to swivel 90° in either direction for a total of 180°. This Swivel Head design will stop at 30°, 45°, 60° or 90° increments, in both directions, allowing for easier temperature readings at any angle. It has a Stainless Steel stem with a Reduced Tip Design which gives you faster response times. A protective pocket sheath is included. Now the DPS300-01 will re-start in the last °F or °C temperature mod last used. Saving time and making the DPS300-01 more user friendly.

Digital Timer & Temperature Alarm w/Thermistor Probe 32/392°F/°C: Have you ever cut into a roast or turkey in the oven to see if it has finished cooking It's an inconvenience, especially if you have to do it several times and can also affect the appearance of your finished product. So save yourself time (and the appearance of your food) by picking up the Cooper commercial electric cooking thermo-timer. The DTT361 thermo-timer is made especially for foods cooked with ovens, deep fryers, deep broilers, and grills. The DTT361 digital thermo-timer is made from stainless steel and has a heat-resistant probe with an alarm and 3 ft. wire cable. A Temperature range of 32 to 392 F (0 to 200 C), operates on AAA batterys. Heat resistant, stainless steel probe that inserts into the food while the oven door closes tightly over its specially designed silicone-jacketed probe cord. The cord will not fray or allow moisture to penetrate inside. Once the desired temperature and / or time setting is reached, an alarm sounds.

Digital Panel Thermometer 2.6" x 1.4" -40/120°F/°C: When mounting space is limited, the digital PM120 is ideal. The rectangular mini remote reading thermometer is F/C switchable. It features Max/Min and On/Off.

Panel Thermometer White Rectangular Solar Powered -58/158°F/°C: When temperature monitoring is essential and space is limited the SP160 is the ultimate panel thermometer. Not only does the compact size allow the SP160 to fit in most places that other panel thermometers cannot, it does not require any external power sources.

For those applications where only one temperature is read at a time, the TM99A is an industry standard. It features Min/Max memory, hold, auto shut-off. It is housed in a rugged polyethylene storage case with a sealed membrane and has a backlight for dark environments. The TM99A includes a carry case and 1075 general purpose probe. Thermistor Temperature Instr w/1075 Probe & Case -40/300°F/°C

1246-02-01 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath NSF 0/220°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.. NSF certified.

The Mastercool 52161 1-3/8" Pocket Thermometer is capable of measuring temperatures in the  -40 To 160° F (-40 To 70º C) range and includes a pocket holder with a clip. This is an analog unit and does not require a battery.

The Mastercool 52220 1" Pocket Thermometer is capable of measuring temperatures in the  0 To 220° F range and includes a pocket holder with a clip. It has On / Off and auto shut-off after 10 minutes. Operates on a 1.5 volt battery with a 5,000 hour battery life.

The Mastercool 52223-A 1" Pocket Thermometer is capable of measuring temperatures in the  -58 To 302° F range and includes a pocket holder with a clip. It has On / Off and auto shut-off after 10 minutes. Operates on a 1.5 volt battery with a 5,000 hour battery life.

Infrared Thermometer With Laser (12:1) Includes Free 52220

The Mastercool 52226 Dual Temp Infrared / Probe Thermometer offers both infrared and contact probe technologies. Infrared range is -67° to 428° F, probe range is -67° to 626° F. With adjustable emissivity, lock mode, min / max capture mode and contact probe locks safely into the side of the unit for storage and transport.

The Mastercool 52228 Digital Differential Thermometer provides instant measurement of TWO points, T1 and T2, or T1 - T2. With features like, max hold, data hold, temp in either Celsius or Fahrenheit, AUX out-put jacks, T1 - T2 differential, K type thermocouple input and it comes with two 3 ft thermocouple probes.

The Mastercool 52229 Handheld Waterproof Digital Thermometer With 96mm Probe Wire and Alarm is capable of measuring temperatures in the -58° to 572° F (-50° to 300° C) range. With features like Min / Max temperature memory, Celsius and Fahrenheit exchange, data hold, high / low temp alarm setting, key tone, stainless steel probe and a fold away stand.

The Mastercool 52230 Pen Type Hygrometer has the following features: Rotating cap to protect the sensor, LCD digital display, temp and humidity in °F or °C, min / max record, data hold and an auto-off function.

The Mastercool 52231 Probe is for use with the Mastercool 52233 Digital Psychrometer.

The Mastercool 52233 Digital Psychrometer has a rotating cap to protect the sensor, LCD digital display, data hold to capture readings, low battery indicator, min / max record function and auto power off with disabling capability. This pocket sized unit provides fast, accurate readings with reliable microprocessor circuitry.

The Mastercool Airflow + Psychrometer is a battery operated, micro processor based meter that reads humidity, air temp., dew point, wet bulb, air velocity, air volume and BTU. The sensor is built into the remote fan and is protected by a rotating cap. With auto-off with disabling, fast and accurate reading, tripod mountable, microprocessor circuitry, metric and inch units selection, large backlit LCD display, professional remote vane, all in a handheld size unit. Operates on 4 AAA batteries and has a low battery indicator.

The Mastercool 52238 Digital Sound Level Meter has automatic or manual ranging, four measurement ranges from 40 to 130 dB, 0.1 dB resolution, fast or slow selectable response times, A or C weighting, max hold, record min or max measurements and jacks for AC analog output.

The Mastercool 52255 is Mastercool’s new A/C System Analyzer is an all-in one tool that not only calculates critical information for the air conditioning system but also diagnoses basic system problems. The LCD display leads the technician through basic tests making service quicker and less complicated. The A/C System Analyzer is able to calculate: Actual Superheat, Subcool, Target Superheat, Temperature Split, Dry Bulb, Wet Bulb, Relative Humidity, Dew Point, Air Velocity and Air Flow Volume.

The Mastercool 52260 is Mastercool’s new A/C System Analyzer is an all-in one tool that not only calculates critical information for the air conditioning system but also diagnoses basic system problems. The LCD display leads the technician through basic tests making service quicker and less complicated. The A/C System Analyzer is able to calculate: Actual Superheat, Subcool, Target Superheat, Temperature Split, Dry Bulb, Wet Bulb, Relative Humidity, Dew Point, Air Velocity and Air Flow Volume.

The Mastercool 52270 is Mastercool’s new A/C System Analyzer is an all-in one tool that not only calculates critical information for the air conditioning system but also diagnoses basic system problems. The LCD display leads the technician through basic tests making service quicker and less complicated. The A/C System Analyzer is able to calculate: Actual Superheat, Subcool, Target Superheat, Temperature Split, Dry Bulb, Wet Bulb, Relative Humidity, Dew Point, Air Velocity and Air Flow Volume.

The Mastercool 52280 is Mastercool’s new A/C System Analyzer is an all-in one tool that not only calculates critical information for the air conditioning system but also diagnoses basic system problems. The LCD display leads the technician through basic tests making service quicker and less complicated. The A/C System Analyzer is able to calculate: Actual Superheat, Subcool, Target Superheat, Temperature Split, Dry Bulb, Wet Bulb, Relative Humidity, Dew Point, Air Velocity and Air Flow Volume.

The Mastercool 52331 Thermocouple Probe - 3 ft (1 Meter) is a wire probe with the K type connector.

The Mastercool 52332 Thermocouple Probe - 10 ft (3 Meter) is a wire probe with the K type connector.

The Mastercool Piercing / Penetration Probe with a K type connector.

The Mastercool 52334 Surface Probe with a K type connector.

The Mastercool 52335 Air Probe with a K type connector.

The Mastercool 52336 Clamp-On Thermocouple has a K type connector and is extendible up to 3 feet. For use with the Mastercool 99XXX HVAC Digital Manifold series.

The Mastercool 52336 Clamp-On Thermocouple has a K type connector and is extendible up to 10 feet. For use with the Mastercool 99XXX HVAC Digital Manifold series.

Pocket Test Thermometers (1 3/4") (0 To 220° F)

Thermometer/Adapter Kit

Superheat Determination Set

TPI 1010A CO2 CO Temperature Humidity IAQ Meter With PC Data Logging Software And USB Cable - Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

TPI 306C Pocket Digital Thermometer -  TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 306XC Auto Field Calibrated Pocket Digital thermometer for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. Measures temperature from -50 to 150 degrees C with an accuracy of + or - 1% of the reading. Thermometer can be calibrated in an ice bath to preserve the accuracy of readings. LCD screen shows the current temperature in degrees C. Stem-style probe is 5" long and has a penetration tip for taking measurements while immersed in liquid or air.

307C TPI Pocket Digital Thermometer Calibratable With Needle Tip W/A306

TPI 310C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

311 TPI Food Service Digital Pocket Thermometer

TPI 312C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 315C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

316C TPI Pocket Digital Thermometer -58°F to 300°F Calibratable Without Magnets

317C TPI Pocket Digital Thermometer-58°F to 300°F With Air Tip

TPI 318C Pocket Digital Thermometer (Chisel Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F. Chisel tip to take surface, air or immersion temperatures.

TPI 319C Pocket Digital Thermometer (Surface Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F. Fast and accurate surface temperatures. Measures three times faster than a chisel tip.

TPI 320C Small Diameter (1.6mm) Digital Pocket Thermometer (Penetration Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 323 Pocket Digital Thermometer -58° to 300°F (-50° to 150°C) (Chisel Tip)  - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 326 Pocket Digital Thermometer (Needle Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 320C Digital Pocket Thermometer (Contact Tip) (No Sheath) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 340-C1 Single Input K-Type Thermocouple Thermometer with A304 Tilt Stand, Boot and Soft Pouch - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 341KC1 Single Input K-Type Thermocouple Thermometer with A304 Tilt Stand, Boot and Soft Pouch - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 341KC2 Single Input K-Type Thermocouple Thermometer with GK13M, Battery and Boot - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 343C1 Dual Input K-Type Thermocouple Thermometer with Field Calibration and with Two GK11M Probes, A304 Protective Boot, A255 Soft Pouch - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 343C2 Dual Input K-Type Thermocouple Thermometer with Field Calibration and with Two GK13M Probes, A304 Protective Boot, A255 Soft Pouch - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 343C3 Dual Input K-Type Thermocouple Thermometer with Field Calibration and with Two CK21M Probes, Two GK13M Probes and A908 Case - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 343C5 Dual Input K-Type Thermocouple Thermometer with Field Calibration and with Two CK24M Probes, Two GK13M Probes and A901 Carrying Case - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 351-F1 Water Proof Single Input Thermistor Thermometer with Bipolar Connector, FX12B Probe, A304 Protective Boot and A255 Soft Pouch - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 367D Data Logging Thermometer (K and T-Type Thermocouple and Thermistor) (-328°F to 1112°F / -200°C to 600°C) - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.367D TPI Ip67 Waterproof Single Input Lumberg Connector K T-Type Or Thermister

TPI 368 Close-Focus, Pocket Size Infrared Thermometer - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 370 Infrared (IR) Thermometer 8:1 Ratio 14° To 500°F No Laser - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 371 Infrared (IR) Thermometer 8:1 Ratio 14° To 500°F Soft Touch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

373 TPI Infrared Thermometer Laser Sighting 8:1 Ratio 14 To 950 F Soft Pouch

TPI 376 Combination Non-Contact IR and Contact Thermometer -58°F to 950°F (-50°C to 510°C) IR and -40°F to 2,192°F (-40°C to 1,200°C) Contact (depending upon optional probe) with Adjustable Emissivity and Soft Pouch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 377 Combination Non-Contact IR and Contact Thermometer 0°F to 1,832°F (-18°C to 1000°C) IR and -40°F to 2,192°F (-40°C to 1,200°C) Contact (depending upon optional probe) with Adjustable Emissivity and Soft Pouch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

377 With Bluetooth Output Combination non-contact (IR) and contact thermometer. Non-contact (IR) range: 0 to 1,832°F (-18 to 1000°C) Contact range: -40 to 2,192°F (-40 to 1200°C) depending upon optional probe selected. Laser sighting Distance to spot ratio 11.5:1. Adjustable emissivity (0.3 to 0.99) °C and °F selectable. Record function (min/max). Backlight display.

381A TPI Infrared Combo Thermometer With Laser -4 To 572 F 9:1 Ratio - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably. Now with added contact probe input.

TPI 381F Non-Contact IR Thermometer -4°F to 572°F (-20°C to 300°C) 4:1 Ratio with Laser Sighting with +/- 2°F accuracy between  32°F to 158°F (the food range) - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 383A Non-Contact IR Thermometer -31°F to 999°F (-35°C to 537°C) 8:1 Ratio with Laser Sighting - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 384A Non-Contact IR Thermometer 0°F to 1832°F (-18°C to 1000°C) 8:1 Ratio with Laser Sighting  - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

556C1 Digital Air Velocity Meter - The 556 Digital Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings as well as calculating CFM. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

565C1 TPI Digital Hot Wire Anemometer W/ Temperature Carrying Case

595C1 TPI Digital Hygro-Thermometer Relative Humidity (Rh) Temperature Carrying Case

TPI 597C1 Digital Hygrometer / Psychrometer - The TPI 597 digital hygrometer / psychrometer is a state of the art, easy to use humidity tester designed to display ambient, dew point, and wet bulb temperature as well as humidity. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

A340 TPI Soft Carrying Case For 340 And 350 Series Thermometers

A368C3 TPI Soft Pouch With Velcro Belt Loop For Pocket Digital Thermometers And 368

TPI CK11M Contact Surface Probe, Waterproof - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK12M Contact Surface Probe, Right Angle, Waterproof - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK13M Heavy-Duty Contact Surface Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK14M Right Angle Heavy-Duty Contact Surface Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK15M Heavy-Duty Contact Surface Probe for HK11M Handle - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK16M Heavy-Duty Contact Surface Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK18M Contact Surface Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK20M Pipe Clamp Probe (Small) - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK21M Pipe Clamp Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK21MC1 2 Pipe Clamp Probes (CK21M) - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK22M Fast Response Contact Surface Probe, 45 degree Angle Swivel Head Sensor - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK23M Fast Response Contact Surface Probe, 90 degree Angle Swivel Head Sensor - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI CK24M Pipe Clamp Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

CX13B TPI Surface Probe

EX11B TPI 3 Foot Extension Lead

TPI EXT31M Sub-Mini Male to Sub-Mini Male Extension (Use with FK31M) - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK11M Chisel Tip Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK12M Pointed Tip Tapered Penetration Probe (Heavy-Duty Penetration) - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK13M Pointed Tip Penetration Probe for HK11M Handle - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK14M Chisel Tip Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK15M Tapered Tip Low Mass Quick Response Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FK21L TPI Penetration Probe

TPI FK21M Tapered Chisel Tip Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FK22L TPI Oven Food Probe

TPI FK22M Pointed Tip Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FK23L TPI Immersion / Penetration Probe No Handle Or Lead

TPI FK23M Rack Clamp Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK24M Heavy-Duty T-Handle Long Stem Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FK25L TPI Flat Sensor Between Pack Probe

TPI FK25M Flat Sensor Pack Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FK26L TPI Immersion / Penetration Probe

TPI FK26M Petes Plug Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK27M Waterproof Long Stem Heavy-Duty Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK28M Heavy-Duty Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK30M Long Stem Heavy-Duty T-Handle Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FK32M Long Stem Heavy-Duty T-Handle Penetration Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FT11L TPI White 1.5Mm Diameter Stem 0.7 Meter Lead

FT12L TPI Liquid/Penetration Probe

FT15L TPI Needle Probe

FT21L TPI Tapered End For Food Penetration

FT22L TPI Oven Food Probe

FT23L TPI Oven Food Probe

FT24L TPI Heavy Duty T-Handle Long Stem Penetration Probe

TPI FX11L Liquid Immersion Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI FX12B Liquid Immersion Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

FX13B TPI Liquid/Penetration Probe

TPI GK11M General Purpose Beaded Tip Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK12M General Purpose Beaded Tip Probe with Rack Clip - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK13M General Purpose FEP Insulated Beaded Tip Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK14M Rigid Stem Hooded Exposed Tip Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK16M General Purpose Caged Air Probe for use with HK11M Handle - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK17M General Purpose Caged Air Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK18M General Purpose Caged Air Probe with Rack Clip and Armored Cable - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

TPI GK19M General Purpose Beaded Tip Probe with Armored Cable - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

GK20M TPI Temperature Probe For Flue

GT13L TPI White 1.5Mm Diameter Stem Exposed Bead 0.7 Meter Lead

GT19L TPI Oven Clamp Probe

GX15B TPI Gas Air Probe

TPI HK11M Handle for use with K-Type Interchangeable Probe Tips - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

VKC300M TPI K-Type Celsius Calibration Box

VKF300M TPI K-Type Fahrenheit Calibration Box

VX11B TPI Test Cap -18°C (-0.4°F)

VX11L TPI Test Cap -18°C (-0.4°F)

VX12B TPI Test Cap 0°C (32°F)

VX12L TPI Test Cap 0°C (32°F)

VX13B TPI Test Cap 70°C (158°F)

VX13L TPI Test Cap 70°C (158°F)

The TM360A is a professional grade thermo-psychrometer adaptable to accommodate all your temperature, humidity, dry/wet bulb and dew point measurements. The unit incorporates 4 discrete temperature ports all capable of min/max and memory functions including temperature differential between any 2 of the 4 available ports. Press the SCAN key and the display will alternate between all 4 ports in three second intervals providing continuous monitoring of multiple probe points during critical system diagnosis. A dedicated special purpose port accommodates an optional state of the art silicon humidity transducer probe for fast and accurate measurements during superheat calculations.

52251 Mastercool A/C System Analyzer

52252 Mastercool Pressure Transducer for A/C System Analyzer

52253 Mastercool Round Vane Probe for A/C System Analyzer

52254 Mastercool Antenna Type Probe for A/C System Analyzer

GTBG-12 JB Industries 3 1/2" Gas Test Gauge 0-30 lb 3/4" End - 3-1/2" gas test gauge 0-30 lb. and 3/4" bell end. Test the system for pressure leaks in the new installs. Easy to read. Fits 3/4" pipe.

GTBG-16 JB Industries 3 1/2" Gas Test Gauge 0-30 lb 1" End - 3-1/2" gas test gauge 0-30 lb. and 1" bell end. Test the system for pressure leaks in the new installs. Easy to read. Fits 1" pipe.

SH-51 JB Industries Digital 28' Temperature Sensor Extension for SH-31N Series - Replacement 28' (8.5 m) temperature sensor extension for use with SH-35N, SH-36N, DM2-3, DM2-5, DM2-8, and DM4-3.

SH-55 JB Industries Carrying Case for SH-31 / SH-31N / SH-34N / SH-35N & TSR-10

SH-56 JB Industries Replacement Wet Socks for SH-35N / SH-36N / DM2-5 / DM2-8 & DM4-3 (5 Pack)

SH-59 JB Industries SH-35N Series 6' Temperature Sensor with Clamp for 1/2" to 7/8" Tubing

Clamp-On Surface Temperature Probe 3/16" to 1.25" Jaw Opening For MD Series Digital Manifolds. All probes have 6ft lead. Probe Type, Surface. Common Uses, Surface temperatures of copper piping from 3/16" (5mm) to 1 1/8" (29mm), Response Time of 12 seconds and a range of -40˚F to 221˚F /-40C TO +105˚C.

AAV3 Fieldpiece Air Velocity and Temperature Accessory Head - Easy to Use Vane Anemometer. The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units:  Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius).  Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space.  Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes.

STA2 Fieldpiece In Duct Hot-wire Anemometer - CFM Without a Hood. For HVACR Pros Air Balancing Needs. The STA2 is a Hot-wire Anemometer built for the HVACR professionals' air balancing needs.  The compact probe tip makes measuring air velocity directly in the duct a breeze.  It's great for traversing a duct and automatically calculating CFM without the hassle and expense of a bulky hood.  The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned.

SDP2 Fieldpiece Dual In-Duct Psychrometer - Do More with One Tool. Easy Temperature Split in Real-Time -- and More. The SDP2 Dual In-Duct Psychrometer is more than just your everyday HVACR psychrometer.  It gives HVACR professionals more insight into HVAC evaporator performance than any other psychrometer, because it takes four evaporator measurements at one time:  supply wet bulb, supply dry bulb, return wet bulb, and return dry bulb.

SRH3 Fieldpiece In-Duct Diagnostic Psychrometer - Easy Target Superheat. In-duct Air Measurements Near the Evaporator. The SRH3 In-duct Psychrometer is a great tool to properly charge fixed restrictor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test.  To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator!

ST4 Fieldpiece Dual Temperature Meter - Heavy Duty Dual Temp Displays T1, T2 or T1-T2. Great for Delta T Calculations. The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples.  The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service.  Use the ST4 to find Delta T and just about any temperature split you want to measure.  Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in our clear front case with magnetic hanger model ANC6.  Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamp T/Cs to check for blocked dryer filters.

PRH2 Fieldpiece Digital Psychrometer - For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional.  Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.

ATA1 Fieldpiece K-Type Thermocouple with Alligator Clip - The ATA1, K-type thermocouple can clip to HVACR equipment for convenient placement and hands free testing. Clip to condenser fins for accurate outdoor dry bulb measurement – great for finding target superheat. Clip to evaporator filters for indoor dry bulb – great for finding target evaporator exit temperature. Clip to supply vents for dry bulb supply temperature. The ATA1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. HVACR technicians find the ATA1 extremely helpful when data logging or anytime an extra hand is needed. The wrap-tab allows the thermocouple wire to conveniently store on the plug. Just wrap the excess wire around the wrap-tab. No more tangled messes in your tool bag.

ATAF1 Fieldpiece High Temperature K-Type Thermocouple with Alligator Clip - The ATAF1, K-type thermocouple clips to HVAC/R equipment for convenient placement and hands free testing. Fiberglass insulation withstands high temperatures up to 900°F. Clip it to residential and commercial ovens, broilers, boilers or any other high temperature application.

ATB1 Fieldpiece K-Type Bead Thermocouple - The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 400°F. Using the included Velcro strap allows for easy pipe temperature measurements, though not as accurately as the ATC1 Pipe Clamp Thermocouple. Use the ATB1 for outdoor dry bulb temperatures when finding target superheat. The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ATC1 Fieldpiece Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning - The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 3/8” to 1 3/8” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ATC1R Fieldpiece Pipe-Clamp Thermocouple 1/8” to 3/4” for Refrigeration - The ATC1R, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 1/8” to 3/4” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1R for most refrigeration units. The ATC1R can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ATC2 Fieldpiece Large Pipe-Clamp Thermocouple 3/8” to 2 1/4” for Air Conditioning - The ATC2, K-type, pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8” to 2 1/4” jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC2 for most A/C units. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ATEXT10 Fieldpiece 10 Foot Extension Cable (K-Type Thermocouple) - The ATEXT10 is a K-type thermocouple extension cable designed to give you that extra reach you need when measuring temperatures. It's 10' in length and has a female k-type port on one end and the male plug on the other. It's great for use with rigid thermocouples.

ATWB1 Fieldpiece K-Type Thermocouple Wet Bulb (sock) with Alligator Clip - The ATWB1, K-type wet bulb thermocouple can clip to HVAC/R equipment for convenient placement and hands free testing. Wet the durable sock and clip to evaporator filters for indoor wet bulb – great for finding target evaporator exit temperature. Clip to return vents for indoor wet bulb temperature – great for target superheat calculations. The ATWB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. HVAC/R technicians find the ATWB1 extremely helpful when data logging or anytime an extra hand is needed.

51408 Titan High Temperature -58°F To -1200°F Infrared Thermometer 8:1. Temp Range: -58ºF to 1202ºF (-50ºC to 650ºC). Built-in laser pointer. Automatic Selection 0.1ºC/1ºF. ºC/ºF switchable button. Emissivity 0.95(fixed). Automatic Data Hold & Auto power off. D:S ratio:8:1. Backlit LCD display. Max and Min function.

The ABM-100 Airflow Balancing Meter is an anemometer that fits in your pocket. It’s our first of a series of tools that connect to smart devices and are specifically designed for the HVAC industry. The ABM-100 easily and instantly converts air speed into air volume for you. Then it records the data to a history log, which can be emailed for professional looking reports.

The ABM-200 Airflow & Environmental Meter has all of the features of  the extremely popular ABM-100 plus it is wireless and also has temperature, humidity, and pressure sensors. These additional sensors give the meter the ability to accurately measure and record: Temperature Differential, Dry Bulb Temperature, Wet Bulb Temperature, Heat Index, Relative Humidity, Dew Point, Barometric Pressure, Air Density, Indoor vs. Outdoor Conditions, Wind Speed/Direction/Gusts. The wireless ABM-200 can be attached to our EXP-64 64” aluminum extension pole (sold separately) to take readings without having to go up a ladder.

The JL3KH6 Fieldpiece Job Link Wireless Charge and Air Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link™ probes!

The JL3KR4 Fieldpiece Job Link Wireless Charge Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes and 2 pipe clamps in a quick access padded case. All measurements can be sent up to 1000’ away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link™ probes!

The PT200W is a compact, portable instrument for accurately measuring and calculating HVAC/R data such as pressure, Super Heat, Sub Cooling, and temperature differential (tH-tL) that are critical to properly servicing HVAC/R equipment. Use the PT200W as a stand-alone gauge or pair it with a mobile device to set up, store or e mail client and job lists, job site data, invoices and other convenient, time saving features. Pressure range of -14.5 PSIG to 750 PSIG and Temperature Range: 23°F to 149°F, Great for calculating superheat, subcooling, vacuum, temperature and general system performance.

The new dual port manometer has all of the capabilities of the old 78050 Single Input Manometer in addition to the following: Capability to measure pressure drop directly across two points such as filter pressure drop or flow volumes, and; positive and negative pressures can be read directly if measured on the appropriate input. The 78052 is a portable, rugged dual port manometer designed especially for HVACR field service technicians. Its range and resolution allow measurement of every day HVAC applications.

The TM360C is a professional grade thermo-psychrometer adaptable to accommodate all your temperature, humidity, dry/wet bulb and dew point measurements. The unit incorporates 4 discrete temperature ports all capable of min/max and memory functions including temperature differential between any 2 of the 4 available ports. Press the SCAN key and the display will alternate between all 4 ports in three second intervals providing continuous monitoring of multiple probe points during critical system diagnosis. A dedicated special purpose port accommodates an optional state of the art silicon humidity transducer probe for fast and accurate measurements during superheat calculations.

The TIF8600 is an easy-to-use hand-held CO2/Temperature monitor. The unit provides stable, highly accurate readings due to our patented dual beam NDIR technology. Equipped with a 0-4V output, the unit is perfect for long-term monitoring/recording. The unit features a large, easy-to-read display with a push-button interface which allows for easy calibration, quick adjustments for altitude correction, and simple toggling between ºC and ºF temperature readings. A new feature of the sensor now includes the ability to calculate and display the cfm/person ventilation rate in a space based on the inside/outside CO2 concentration.

A32555 JB Industries Digital Thermometer

ABMHOODX5 CPS Expansion Pole

ABMHOODX3 CPS Easy Hood - 24" x 24" Expansion Frame & Fabric Assembly

• Single-hand operation
• Extremely accurate and quick
• Compact design
• Comfortable, ergonomic grip

Part of the Job Link® System, the JL3MN Manometer lets you work the way you want to. Its strong magnet allows you to place your probe directly on a test port and its short tubes offer tangle-free work.

The JL3PC pipe temperature wireless clamps feature patent pending Rapid Rail™ Sensor Technology that uses electrically conductive pipe to complete the circuit so readings stabilize in 3 seconds and are not affected by ambient air. One beep with a slow green blinking light indicates a closed circuit. If the pipe is corroded the circuit will be open and will not read temperature. The clamp will indicate the open loop with a double beep and rapid blinking light. Simply clean the pipe to enable the circuit to be closed and allow fast readings with +/- 1° F accuracy.

Easily access service ports at odd angles and/or tight spaces with the Job Link® System Pressure Probes. Pressure sensors are accurate at any elevation so your readings are spot on no matter your location.

The JL3RH Job Link® System Psychrometer Probe has a long flexible wand and strong sliding magnet for easy measurements anywhere on the system. Get instant live readings from ducts, plenums, registers, or grilles for accurate diagnostics. Now handles extreme duct temperatures up to 250°F and as low as -40°F!

Non-Contact Thermometer