The 909 Channellock Crimping Tool is designed for crimping of both insulated and non-insulated solderless connections and terminals on 10 to 22 AWG wire. Made of fine polished high carbon drop-forged steel, it features perfectly mated cutters.

CSPH1HD SIMpull Gripit™ Circuit Size Pulling Head, Our GripIt Circuit Management System can help make every branch circuit and home run pull safer, easier and more productive.For 14AWG-10AWG solid or stranded conductors. 0-32886-91098-2, 58-28-11. Reusable pulling head for circuit wire. Easily attach up to 7 wires per SIMpull GRIPit. Easily connects to fish tape, string or rope. No need to strip or tape the wire. Saves time making pulling heads.

4216-001 Replacement Blade for 4215 QuickStrip™ Battery Cable Stripper Tool (10 to 4/0 Gauge)

B-202 Seatek Replacement Blade (2 Pack) for Strip-All - Works with all models of Strip-All.

4215-001 QuickStrip™ Battery Cable Stripper Tool (10 to 4/0 Gauge) - This QuickStrip™ cable stripper comes with a replacement blade and a 6-month limited warranty. Strip the insulation off of cable from 10 to 4/0 gauge.

B-102 Seatek Blue Sapphire Replacement Blade Steel (2 Pack). Blade used to cut steel casing. For use with for all models of the Roto-Split & Roto-Flex. For use on BX & FLEX Cutters: RS-101, RS-101A, RF-120A, RF-120B and RF-170. (Not recommended to cut aluminum armor).

11469 Titan Adjustable Wire Stripper.  Cuts and strip solid or stranded 12-22 gauge wire. Automatically adjusts to wire size. Handles single or multiple conductor wire. Easy to use - yields clean, nick-free results every time. Not designed to strip Teflon or similar insulators.

Insulated Terminals AWG 22-18 / 16-14 / 12-10 0.5-1.0 / 1.5-2.5 / 4-6 mm2 for 11950 11955 11960

A2 Die Fully Insulated Quick Disconnect. Terminals AWG 22-18 / 16-14 / 12-10 0.5-1.0 / 1.5-2.5 / 4-6 mm2 for 11950 11955 11960.

A3 Die Mini Insulated Terminals AWG 26-22 / 24-18 / 22-16 0.1-0.5 / 0.25-1.0 / 0.5-1.5 mm2 for 11950 11955 11960.

11905 Titan A4 Die Insulated Flag Terminals AWG 22-18 / 16-14 0.5-1.0 / 1.5-2.5 mm2 for 11950 11955 11960.

11906 Titan A5 Die Closed End Connector & Heat Shrink Terminals AWG 22-16 / 16-14 / 12-10 0.5-1.5 / 1.5-2.5 / 4.0-6.0 mm² for 11950 11955 11960.

11478 Titan Wire Stripper: This wire stripper has no problem stripping and cutting solid wire (AWG 8 - 20) and stranded wire (8 - 22 gauge). Designed to also be utilized to pull, loop and bend wire, and to crimp insulated and non-insulated terminals.

4275-001 QuickCutter 1 Cable Cutter (9" Length) - These forged steel cable cutters have ergonomic insulated grips and can cut cables up to 2/0 gauge. They come with a 6 month warranty.

A1 Die Heat Shrink Butt Connectors AWG 22-18 / 16-14 / 12-10 / 8 DIN 0.5-1.0 / 1.5-2.5 / 4-6 / 10 mm² for 11950 11955 11960

11946 Titan H6 Die Delphi Weather Pack Terminal AWG 22 / 20-18 DIN 0.35 / 0.5-0.8 mm² for 11950 11955 11960.

11947 Titan H7 Die Delphi Weather Pack Terminal AWG 16-14 / 12 DIN 1.0-2.0 / 3.0 mm² for 11950 11955 11960.

11961 Titan K1 Die Deutsch Terminal

11962 Titan K2 Die Deutsch Terminals AWG 10 / 12

11963 Titan K3 Die Deutsch Terminals AWG 18 / 16 / 14

11964 Titan K4 Die Deutsch Terminals AWG 20 / 18 / 16

11965 Titan K5 Die Deutsch Terminals AWG 20 / 18-16

11966 Titan K6 Die Deutsch Terminals Deutsch Terminals AWG 16 / 14 / 12

11477 Titan Ratcheting Wire Terminal Crimper: This ratcheting crimper has adjustable crimp compression and is color coded for various sizes of wire crimps. Add one to your tool collection today.

11915 Titan H1 Die Spark Plug Connectors AWG 17 DIN 1.0 mm² for 11950 11955 11960.

SA-200SK Seatek Strip-All With Wire Stripper Utility Knife and A-201 Adapter (Cables 1/8" to 5/8" Diameter) - Compact stripper for jacketed cables (plastic, teflon or rubber). Straight and ring cutting from 1/4" to 5/8" diameter. Comes with wire stripper, folding knife blade, A-201 Cable Adapter and replacement blade cartridge. Precision depth of cut adjustment.

11475 Titan Self Adjusting Wire Stripper: This wire stripper is here to make life easier on you. With the ability to automatically strip 24 through 10 AWG wire and cable and crimp 22 through 10 AWG insulated and non-insulated terminals as well as 7 and 8mm ignition terminals. Get yours and start making it easy.

11900 Titan Ratcheting Crimper Frame (No Dies) Ratcheting Terminal Crimper used with the most common types of solderless terminals. Quick change jaw design allows dies to be easily changed out. Ratcheting action and full cycle quick-release feature for secure uniform crimps. Built-in safety release allows the crimper to release mid-cycle. Adjustable compression wheel. Corrosion resistant carbon steel frame. Comfort grip handles reduce hand fatigue. Can be used with other TITAN interchangeable crimping dies.

4218-001 Replacement Blade for 4217 QuickStrip™ Pro Battery Cable Stripper Tool (10 Gauge to 777 MCM)

11476 Titan 3pc Electrical Tool Set

420221-001 QuickStrip Linear Cable Stripper Cable Guide Only 8-6 Gauge - For use with Quick Cable 420201 QuickStrip LS Cable Stripper. Use on braided copper wire and cable only, insulated with general purpose soft plastic or rubber insulation. Do not use on steel cable, wire rope, etc.

420222-001 QuickStrip LS Cable Guide 4-1/0 Gauge - For use with Quick Cable 420201 QuickStrip LS Cable Stripper. Use on braided copper wire and cable only, insulated with general purpose soft plastic or rubber insulation. Do not use on steel cable, wire rope, etc.

420223-001 QuickStrip LS Cable Guide 1/0 GA -250 MCM - For use with Quick Cable 420201 QuickStrip LS Cable Stripper. Use on braided copper wire and cable only, insulated with general purpose soft plastic or rubber insulation. Do not use on steel cable, wire rope, etc.

502904-2001 QuickCable Heavy Duty Cable Cutter and Stripping Tool - Quick Cable is your best source for cable tie tools and cutters.

Knipex Diagonal Wire Cutters require 21% less effort than conventional cutters due to lever ratio, cutting edge angles and ergonomic handles.  Made from oil tempered chrome vanadium steel with induction hardened 64HRC cutting blades. 7401180 High Leverage Diagonal Cutters can cut up to .149" wire.

11955 Titan Ratcheting Heat Shrink Terminal Crimper. Crimper loaded with 11906 A5 Die for use with closed end connectors & heat shrink terminals. Quick change jaw design allows dies to be easily changed out. Ratcheting action and full cycle quick-release feature for secure uniform crimps. Built-in safety release allows crimper to release mid-cycle. Features include an adjustable compression wheel. Corrosion resistant carbon steel frame. Quick change jaw design. Comfort grip handles. Safety release. Adjustable compression. Ratcheting mechanism releases after full compression. Can be used with other TITAN interchangeable crimping dies.

502904-001 QuickCable Heavy Duty Cable Cutter and Stripping Tool - Quick Cable is your best source for cable tie tools and cutters.

11956 Titan Ratcheting Spark Plug Connector Crimper. Crimper loaded with 11916 H1 Die (Spark Plug Connectors AWG 22-16 / 16-14 / AWG 17 DIN 1.0 mm²) for use with Spark Plug Connectors. Quick change jaw design allows dies to be easily changed out. Ratcheting action and full cycle quick-release feature for secure uniform crimps. Built-in safety release allows crimper to release mid-cycle. Features include an adjustable compression wheel. Corrosion resistant carbon steel frame. Quick change jaw design. Comfort grip handles. Safety release. Adjustable compression. Ratcheting mechanism releases after full compression. Can be used with other TITAN interchangeable crimping dies (see below).

420241-001 QuickStrip LS Cutter Blade - Hardened M2 tool steel replacement blade for the Quick Cable 420201 QuickStrip LS Cable Stripper.

The industry standard since 1973 and the first quality BX cutter for AWG #14-2 to AWG #8-4 cables. Also cuts 3/8" trade size flexible conduit. A few turns of the crank of this compact tool produces a clean slit through armored casing. Simply untwist to strip! This operation takes only a few seconds. It is absolutely safe and does not damage the wires inside due to the unique built-in depth of cut stop, no need to finagle with an adjustment screw! The patented Roto-Split spells the end to nicked fingers and cut knees. The open channel construction pioneered by Seatek allows cutting in the middle of a roll. Simplicity at its best!   This rugged tool can be carried in your belt pouch or in your hip pocket like a pair of pliers. Always ready when you need it, even on top of a ladder or in hard to reach places. RS-101A requires no adjustment after initial setting - quick clamp lever does it all! Best of all the cable pops out automatically as soon as a cut is completed.

Knipex Diagonal Wire Cutters require 21% less effort than conventional cutters due to lever ratio, cutting edge angles and ergonomic handles.  Made from oil tempered chrome vanadium steel with induction hardened 64HRC cutting blades. 7401250 High Leverage Diagonal Cutters can cut up to .165" wire. Fixed forged-on-axle for durability and long tool life. Two piece joint versus using pins eliminates slopiness of joint.

The choice of material (Chrome Vanadium), lever ratio and cutting edge angle mean that KNIPEX - High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on axle for work under continuous stress. Requires 21% less effort. Cutting a medium hard wire of 2.0 mm dia. High Leverage Diagonal Cutter (length 160 mm) requires a handforce of only 293 N (29.3 kp) instead of 370 N (37.0 kp) with a common Diagonal Cutter of the same length.

OTC 4497A Ratcheting Terminal Crimper - Heavy-gauge steel crimping tool designed for insulated wire terminals. Ratcheting action crimps terminal to correct tightness on the wire, making crimping fast and easy. Insulated handles with compound mechanical leverage for power. For wire sizes: AWG 22-18 (0.6mm—1.0mm) red terminal; AWG 16-14 (1.3mm –1.6mm) blue terminal; AWG 12-10 (2.0mm—2.6mm) yellow terminal.

Seatek has introduced a new model in the Roto-Split line equipped with an exclusive auto clamping feature. This MC cutter has a clever clamping system which covers the complete cable size range without the need to fuss with a thumb screw. Just squeeze the bottom lever & any cable from 14-2 to 10-4 or 3/8" Flex is secured, no adjustment is required!   This new patent pending system prevents applying too much force to aluminum casing. The RS-101AC also has a depth of cut adjustment lever which switches between standard MC & new brands of reduced diameter MC such as Southwire MCAP cable.

For medium hard wire cables up to 6mm diameter, e.g. bowden cords, but also for cables and steel rods . Blade hardness approximately 62HRc. Cuts without burr, special blade geometry prevents the wire splaying with opening spring and latch. Cutting head forged. Head polished, handles plastic coated.

8" Lever Action Mini Bolt Cut. Precision cutting edges for soft and hard wire as well as piano wire. Cuts components like bolts, nails, rivets, etc. up to 5.2 mm dia. Exceptional cutting performance with minimum effort because of unsurpassed effective lever action design. Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC. Chrome vanadium heavy-duty steel, forged, oil-hardened.

10" High Leverage CTr Cutter

420224-001 QuickCable 16 - 10 Gauge Primary Wire Guide for QuickStrip LS - For use with Quick Cable 420201 QuickStrip LS Cable Stripper.

11980 Titan 5 Ton Hydraulic Cable Crimper includes 9 hardened-steel die sets, power-coated steel construction, Vinyl dipped non-slip handle, on/off retractor knob, powerful hydraulic action delivers 45kn (10,116 lbf) of force for secure crimps, create strong mechanical connections with crisp and sharp corners.

4217-001 QuickStrip™ Pro Battery Cable Stripper Tool (10 Gauge to 777 MCM) - This QuickStrip™ pro cable stripper comes with a replacement blade and a 6-month limited warranty. Strip the insulation off of cables from 10 gauge to 777 MCM.

11981 Titan High Capacity Hydraulic Wire Crimper #6-4/0 Awg includes 8 hardened-steel die sets, power-coated steel construction, non-slip handle, on/off retractor knob, powerful hydraulic action delivers 70kn (15,736 lbf) of force for secure crimps, create strong mechanical connections with crisp and sharp corners.

3Pc Universal Set W/ Cobra

420230-001 QuickStrip LS Cable Guide 8-250 MCM (Set of 3 Guides) - For use with Quick Cable 420201 QuickStrip LS Cable Stripper. Use on braided copper wire and cable only, insulated with general purpose soft plastic or rubber insulation. Do not use on steel cable, wire rope, etc.

4217-2001 QuickStrip™ Pro Battery Cable Stripper Tool (10 Gauge to 777 MCM) (Each) - This QuickStrip™ pro cable stripper comes with a replacement blade and a 6-month limited warranty. Strip the insulation off of cables from 10 gauge to 777 MCM.

420241-003 QuickCable QuickStrip LS Cutter Blade (3 Pack) - Hardened M2 tool steel replacement blade for the Quick Cable 420201 QuickStrip LS Cable Stripper.

11950 Titan 7 pc. Ratcheting Terminal Crimping Set. For use with the most common types of solderless terminals, Comes with (1) Ratcheting Crimper & (6) Interchangeable dies. Quick change jaw design allows dies to be easily changed out. Ratcheting action and full cycle quick-release feature for secure uniform crimps. Built-in safety release allows crimper to release mid-cycle. Adjustable compression wheel. Corrosion resistant carbon steel frame. Comfort grip handles reduce hand fatigue. Can be used with other TITAN interchangeable crimping dies.

3Pc Cobra Pliers Set

989820US Knipex 5 Pc Hybrid Automotive Pliers Screwdriver Tool Set - 1,000V. 5 Pc Automotive Pliers /Screwdriver Tool Set-1,000V. This new 5 piece automotive insulated tool set is the perfect basic level kit for working around hybrid cars. All tools meet ASTM F1505-01 and IEC 609002004 standards for insulated tools and feature high visibility two-component handles.

SI807 Knipex 7-PC Insulated Hybrid Tool Set is a dual component red and yellow handles contain hard "movement zones" and soft "gripping zones" for fast, comfortable use. High leverage design and induction hardened cutting edges for the greatest ergonomic benefit to the user. Hybrid Tool Kit. Pliers Diagonal Pliers/Lineman's Pliers/Needle Nose Pliers. Satisfies the NFPA 70E recommendations for arc flash protection. Set contains a 10" Alligator pump plier, an 8" long nose, a 9" Linesman plier, an 8" diagonal cutter, a 4" Phillips #2 and two slotted screwdrivers (4" and 6").

420201-001 QuickStrip LS Cable Stripper (Cable Guide Required) - This industrial quality cable stripper is capable of stripping wire from 16 AWG to 250 MCM. Designed for stranded copper cable with plastic or rubber insulation with or without a paper, jute or foil liner. This machine does not come with cable guides and they are required for this tool to function. Cable guides are available separately. Use on braided copper wire and cable only, insulated with general purpose soft plastic or rubber insulation. Do not use on steel cable, wire rope, etc. GUIDES ARE REQUIRED AND DO NOT COME WITH THE MACHINE