026-80216-00 RTI Ford Spring Lock Tool Kit

4 Piece Jiffy-Tite Line Quick Disconnect Set made from stainless steel makes quick work of disconnecting those Jiffy-Tite tube fittings.  This tool eliminates the need to remove the spring clip. Losing and or damaging springs is no longer a problem.

026-80373-00 Quick Disconnect Set (5 Piece)

063-1311 MotorVac Spring Lock Disconnect Tool - Ford (Included with CC1000)

The 39400 Lisle Angled Disconnect Tool Set disconnects Air Conditioning and Quick Connect Fuel Lines. Connect Fuel Lines. Disconnects spring lock couplings on Ford and Chrysler AC lines. Works on fuel lines and other quick disconnect couplings on domestic and import vehicles. The handles are angled to access tight spots. Made of durable plastic that resists fuels and solvents. Six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8". All disconnects available individually skin-packed.

Ford Spring Lock Assortment: Total of 60 pieces comprised of eight separate part numbers of which you will get, four sizes of o-rings, four sizes of  garter springs, green HNBR construction

OTC 4494 Fuel and Air Conditioning Line Release Tool - Easily separates fittings on fuel and air conditioning lines. Tool is capable of releasing fuel line and air conditioning fittings sized 3/8", 1/2", 5/8" and 3/4".

OTC 4495 A/C and Fuel Line Disconnect Set - Use to remove A/C and fuel line quick disconnect fitting from hard-to-reach areas. Six sizes available to work on many import and domestic vehicles.

OTC 6508 Full-Coverage Disconnect Tool Set - If you’re working on Chrysler, Ford, or General Motors vehicles, this set can make your job easier. The tools are designed for heater hoses, transmission oil coolers, air conditioning and fuel lines.

OTC 6509 Fuel Line Disconnect Tool (3/8" & 5/16") - This tool's innovative low-profile design allows for it to be used in tight spaces and it works on the big three's (GM, Ford and Chrysler)  vehicles. Gets into places where there is limited clearance such as between the fuel line fittings and fuel filters, fuel Rails, sending units. The tool is designed to access the center port on the GM fuel tank sending unit. For 3/8" & 5/16" applications.

OTC 6511 Fuel Line Disconnect Tool (3/8" & 1/2") - This tool's innovative low-profile design allows for it to be used in tight spaces and it works on the big three's (GM, Ford and Chrysler)  vehicles. Gets into places where there is limited clearance such as between the fuel line fittings and fuel filters, fuel Rails, sending units. The tool is designed to access the center port on the GM fuel tank sending unit. For 3/8" & 1/2" applications.

OTC 6517 Fuel & A/C Disconnect Set (9 piece) - Designed for A/C lines, fuel lines, and transmission cooler lines.

6554 OTC Fuel / Ac Line Disconnect Kit - The new OTC 6554 Fuel and AC Line Disconnect Kit provides technicians with a great selection of disconnect tools - intended for top-side vehicle service. We've included ONLY the disconnect tools needed for vehicles on the road today and ONLY tools intended for Fuel and AC lines in the OTC 6554.

6579 OTC Transmission Line Disconnect Tool 2-Pack - Designed to disconnect transmission lines on Ford Taurus/Explorer 2005 and newer.

OTC 6593 Ford Transmission Cooler Line Disconnect Set - This set includes both the 3/8" and the 1/2" disconnect tools used to release the fittings attaching to the cooler lines found on some Ford transmissions.

OTC 6594 Ford Oil Line Disconnect Tool for 6.0L - This tool is utilized to disconnect the high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.

OTC 6595 Ford High Pressure Oil Line Disconnect - This tool is used to disconnecto the high pressure oil line from the cylinder head.

GM FUEL LINE DISCONNECT TOOL

OTC 6611 Transmission Line Disconnects - Used on 2001 to current Chevrolet Corvette with the 4L60E transmission, and 2003 to current Cadillac CTS with the 5L40E transmission. Sold in packs of six.

OTC 7337 Ford Fuel Line Disconnect Tool Set - These tools will easily disconnect the spring lock couplings of fuel lines on Ford's throttle body and port fuel injection systems.

OTC 7361 Fuel Line Disconnect Tools - These little fuel line disconnect tools are just right for working on quick disconnect fuel lines.

OTC 7363 Fuel Line Disconnect Tool Set - This set works on quick connect fuel lines on Ford, GM, and Chrysler, and on the spring lock fuel line couplings on Ford's popular PFI system.

OTC 7646A Ford Clutch Coupling Tool - Disconnects the hydraulic clutch line from the clutch slave cylinder on the following vehicles with manual transmissions and hydraulic clutches.

Astro 15-piece Master Disconnect kit features a complete set of disconnect tools stored in a handy blow-molded case. Includes a Fuel & Transmission Line Disconnect Set, Oil Cooler Line Remover, and an Air Conditioning & Fuel Line Disconnect Tool Set.

OTC 7910 GM Hydraulic Clutch Line Disconnect Tool - This is a versatile tool for disconnecting clutch lines when you’re working on clutch assemblies or slave and master cylinders.

OTC 7937 GM Transmission Oil Cooler Line Disconnect Tool - Simple enough to operate that you can do it with one hand. Specifically designed to work in tight places.

8011 Assenmacher Specialty Tools Replacement Rubber Band for Disconnect Tools

8012 Assenmacher Specialty Tools 5/16" Ford Fuel Filter Disconnect Tool - Made of red-anodized aluminum. Used for R & R of fuel filter & 5/16" return line from the fuel pump-sending unit. Applicable for Ford® Aerostar, Bronco, E-Series, Explorer, F-Series, and Ranger models as well as the Saab® 900.

8013 Assenmacher Specialty Tools 3/8" Ford Fuel Line Disconnect Tool - Used for removing 3/8" fuel lines & feed lines from the fuel pump-sending unit. Applicable to Ford® Aerostar, Bronco, E-Series, Explorer, F-Series and Ranger models as well as the Saab® 900.

8014 Assenmacher Specialty Tools 5/16" Ford AXOD/ATX Oil Cooler Line Disconnect Tool - Used for removing both oil cooler lines from the fittings on automatic transmissions. Applicable: Ford® Taurus & Ford® Escort with AXOD & ATX transmissions.

8016 Assenmacher Specialty Tools 1/2" Dodge Oil Cooler Line Disconnect tool - Used for removing both of the oil cooler lines from the fittings on automatic transmission & oil coolers. Applicable for Dodge® Ram trucks with [V10] or Cummins Turbo Diesel engines & various other Dodge® models.

8021 Assenmacher Specialty Tools 3/8" Ford Oil Cooler Disconnect Tool - Used for disconnecting transmission oil cooler lines. The flares on the the cooler lines near the fittings prevent access with the original style disconnect tools. The locking clip used in the fitting is different than the standard 'tabs' used on most other applications. The #8021 will clear the flare & disconnect the new style clips with ease. Applicable: [2003-2004] Ford® Explorer, [2003-2008] Ford® F-150 and [2003-2004] Cadillac® CTS.

8022 Assenmacher Specialty Tools GM Fuel Filter Disconnect Tool FUEL FILTER - Used for the R & R of the fuel filter. Applicable: [2002-2004] Chevrolet® Tahoe & Suburban.

8023 Assenmacher Specialty Tools 1/2" Ford Oil Cooler Line Disconnect Tool - Used to disconnect 1/2" transmission oil cooler lines. Applicable: [2009] Ford® Escape with 6F Trans, [2012] Ford® Edge, [2005] Ford® Excursion with 6.0L Turbodiesel, [2008] Ford® Explorer (V8 engine), [2005] Ford® F-250 with 6.0L Turbodiesel, and [2005] Ford® F-350 with 6.0L Turbodiesel.

8024 Assenmacher Specialty Tools 1/2" Ford Oil Cooler Line Disconnect Tool - 1/2" Oil Cooler Line Remover used for R & R of transmission oil cooler lines. Applicable: [2007] Ford® Explorer, [2006] Ford® Ranger and various other Ford® models.

8026 Assenmacher Specialty Tools 5/16" Nissan/Toyota Fuel line Disconnect Tool - 5/16" Fuel Line Disconnect Tool. Used for disconnecting the fuel line from the fuel rail. Applicable: [2004–newer] Nissan® & Toyota® models.

8027 Assenmacher Specialty Tools GM Duramax Fuel Injector Disconnect Tool - Used for removing the fuel line from the indirect fuel injector. Made of Orange-Anodized Aluminum. Used during R & R of Fuel Lines. Applicable: [2011] GM® w/ 6.6L [V8] turbo diesel Duramax engine [2011] Chevrolet® Silverado 2500 and [2011] GMC® Sierra 2500.

8028 Assenmacher Specialty Tools Subaru Fuel Line Disconnect Tool. Comparable to Subaru #18371AA000 and #42099AE00. Applicable: (2004–newer) 2.0L and 2.5L turbo engines, 2.5L naturally aspirated engines (except 2006 WRX/STI).

Ford Spring Lock Coupling O-Ring And Garter Spring Assortment

Set Of Four Spring Lock Coupling Tools, sizes 3/8” ( #6 ) Red, 1/2” ( #8 ) Blue, 5/8” ( #10 ) Black and 3/4” ( #12 ) Beige used on Fords and Chryslers. Durable spring loaded design for long life and reliable fit.

3/8" Spring Lock Coupling Tool

1/2" Spring Lock Coupling Tool

5/8" Spring Lock Coupling Tool

3/4" Spring Lock Coupling Tool

Springlock Ford/Import Tool Kit

TOY200 Assenmacher Specialty Tools A/C Clamp Remover - A/C Clamp Remover for removing special air condition line clamps. Applicable: 1998 and newer Toyota® models with the new style A/C clamps. Comparable to Toyota® Tool numbers 09870-00015 and 09870-00025.