 |
 |
 |
|
10724 Solderseal™ Large Assortment Kit (135 Piece) - High quality, sealed solder connection that takes the guess-work out of soldering watertight connections.
With the application of heat, Master Solder and Heat Seal connectors create high quality, heat sealed solder connections that take the guess work out of soldering and sealing water tight connections.
To install:
- Strip and slide the intermingled wires into the connector.
- Apply heat to the connector until the solder flows, the adhesive flows, and the tubing recovers.
- Allow the connector to cool.
They are available in standard assortment packs and minipacks. Choose Master Solder and Heat Seal connectors when you want strength and superior conductivity.
 Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
- High quality, sealed solder connection that takes the guess-work out of soldering watertight connections
- Low Temperature pre-measured solder with flux for greater tensile strength and superior current flow
- Uniform adhesive flow does not overflow onto terminal to impede contact
- Heat shrink tubing does not reduce in length creating better insulation along with superior wire support and strain relief
- Translucent, adhesive-lined polyolefin shrink tubing
- Allows visual inspection, prevents wire corrosion, and provides a water and contaminant resistant seal
- Ensures the original integrity of wire connections and wiring harnesses and conforms with OEM standards
- 102 lbs tensile strength
- Refills available in bags of 10 or 50
Solderseal™ Specifications:
- Temperature Rating: -67°F to 230°F (-55°C to 110°C)
- Longitudinal Change: +1, -10%
- Recovery Temperature: 275°F (135°C)
- Dialectic Strength: 900 Volts/Mil.
- UL Voltage Rating: 600 Volts
- Corrosion Resistance: Non-corrosive
- Fungus Resistance: Non-nutrient
- Water Absorption: <0.1%
Kit Includes:
- Ring Terminals
- 5 each 18-20 AWG, #6 Stud, Red
- 5 each 18-20 AWG, #8 Stud, Red
- 5 each 18-20 AWG, #10 Stud, Red
- 5 each 18-20 AWG, 1/4" Stud, Red
- 5 each 14-16 AWG, #8 Stud, Blue
- 5 each 14-16 AWG, #10 Stud, Blue
- 5 each 14-16 AWG, 1/4" Stud, Blue
- 5 each 14-16 AWG, 3/8" Stud, Blue
- 5 each 10-12 AWG, #10 Stud, Yellow
- 5 each 10-12 AWG, 1/4" Stud, Yellow
- 5 each 10-12 AWG, 3/8" Stud, Yellow
- 5 each 10-12 AWG, 1/2" Stud, Yellow
- Spade Terminals
- 5 each 18-20 AWG, #10 Stud, Red
- 5 each 14-16 AWG, #10 Stud, Blue
- 5 each 10-12 AWG, #10 Stud, Yellow
- Butt Connectors
- 5 each 22-24 Butt Connector, Clear
- 10 each 18-20 Butt Connector, Red
- 10 each 14-16 Butt Connector, Blue
- 5 each 10-12 Butt Connector, Yellow
- Insulated Couplers
- 5 each 18-20 AWG Female, 0.250 Tab, Red
- 5 each 18-20 AWG Male, 0.250 Tab, Red
- 5 each 14-16 AWG Female, 0.250 Tab, Blue
- 5 each 14-16 AWG Male, 0.250 Tab, Blue
- 5 each 10-12 AWG Female, 0.250 Tab, Yellow
- 5 each 10-12 AWG Male, 0.250 Tab, Yellow
|
|
|
|
|
|
|