This Charging assembly replaces older charging assembly for the Solar 2001 / 3001 units. The charger is a fully automatic multistage unit for charging the internal battery of your jump starter. The circuitry allows for either AGM or standard (flooded) batteries. This upgrade kit replaces all internal components on the charging board including the transformer, board and circuit breaker. Includes charger, mounting spacers and hardware, wires and instructions for a complete install.

Retractable Jumper Cable K/K 8 FT #2 Negative

Retractable Jumper Cable K/K 8 FT #2 Positive

238-608-666 Retractable Jumper Cable Set, 8 FT #2 Gauge Positive & Negative

246-483-666 Solar Circuit Breaker 20 Amp Wheel Units, replaces KK310310

247-004-666 Solar Ammeter Round 0-20 DC Amperes, replaces KK310260

Voltmeter Round Panel Mount 11-15 Volt DC Threaded Post Terminal Connections. There are two versions of this meter, older units have spade connections and newer units have threaded wire terminals.

Voltmeter Round Panel Mount 11-15 Volt DC 1/4". Includes Quick disconnect Terminal Connections for older units. There are two versions of this meter, some units have spade connections and other units have ring terminals.

247-153-666 Solar Voltmeter Round Panel Mount 0-25 Volt DC Threaded Post Terminal Connections. There are two versions of this meter, some units have spade connections and other units have ring terminals.

248-365-666 Solar Power Cord Jump-N-Carry 120 Volt 3 Prong Molded Plug with ground. Spade termial termination.

This charger will maintain a battery and recharge most lead-acid batteries within 4-8 hours. The charger constantly monitors it's storage battery or the battery it's charging. It may be used to charge maintenance-free, conventional, deep cycle, gelled electrolyte, and recombination batteries.

KK310310 Voltmeter Round  - DISC SEE 247-152-666

311-140-000 Solar Wheel Bearing 5/8"

312-434-666 Negative Parrot Grip Clamp

312-435-000 Positive Parrot Grip Clamp

312-441-000 Solar Axle Cap For 5/8" Axle (KK110042) 2001 3001 HT1224

509412-2001 QuickCable 20 Amp Circuit Breaker with No Mounting Bracket (100 Pack) -  Quick Cable has circuit breakers for applications in trucks, buses, automotive, RV, and marine circuits. Available in auto-reset or manual reset styles.

602055-2002 500 Amp Parrot Style Jaw Booster Clamps (Pair) - Parrot Jaw Battery Clamps are designed for use with Large battery chargers or jumper cable applications. They are rated for 12 volt, 500 amp applications. Large triple wound spring applies 50 pounds of force to ensure tight grip on terminals and battery posts. Handles have color identification for positive and negative. Solid copper construction.

602065-002 QuickCable 500 Amp Parrot Booster Clamp (Pair) - Coated Parrot Jaw Battery Clamps are designed for use with Large battery chargers or jumper cable applications. Vinyl Coating adds protection against shorting or arcing as well as a solid grip. They are rated for 12 volt, 500 amp applications. Jaws open to 1.5" Max. Accepts Wire sizes up to 1/0. Large triple wound spring applies 50 pounds of force to ensure tight grip on terminals and battery posts. Jaw is removable for easy wire crimping and attaches with a supplied screw. Handles have color identification for positive and negative.

741-050-666 Solar Front Panel With Gauges

If replacing the charging unit on a FMB1224, use 865-947-666 Automatic Charging Unit (3 battery bank). If replacing the charging unit on a 2001 or 3001 (1 battery bank), use 218-060-666 Automatic Charging Unit, If replacing the charging unit on a 2001 or 3001 (2 battery bank), use 865-946-666 Automatic Charging Unit.

865-904-000 Solar Charger Circuit Board Heavy Duty 10 Amp
• For FMB1224, use 865-947-666 Automatic Charging Unit (3 battery bank).
• For HT1224 Use 865-946-666 Dual Bank Charger.
• For 2001 or 3001 (1 battery bank), use 218-060-666 Automatic Charging Unit.
• For 2001 or 3001 (2 battery bank), use 865-946-666 Automatic Charging Unit.