112364 Robinair O-Ring For R-134a Quick Seal Fittings (Each). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

These gaskets fit 1/4" flare and 1/2 ACME standard hose fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become crushed over time resulting in poor flow or restriction due to swelling. These are standard for some other vendors hoses as well.

Low Side Compound Refrigerant Manifold Gauge R22/404A/410A -30 To 250 Psi/Bar pressure readings, R22/404A/410A temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11725 Robinair High Side Refrigerant Manifold Gauge R22/R404A/R410A 0 To 500 Psi/Bar pressure readings, R22/R404A/R410A 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

Low Side Compound Refrigerant Manifold Gauge R12/22/502 -30 To 125 Psi/Bar pressure readings, R12/22/502 -30 To 125 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11735 Robinair High Side Refrigerant Manifold Gauge R12/22/502 0 To 500 Psi/Bar pressure readings, R12/22/502 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

Low Side Compound Refrigerant Manifold Gauge R134a/404A/507 -30 To 125 Psi/Bar pressure readings, R134a/404A/507 -30 To 125 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11745 Robinair High Side Refrigerant Manifold Gauge R134A/R404A/R507 0 To 500 Psi/Bar pressure readings, R134A/R404A/R507 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11755 Robinair High Side Refrigerant Manifold Gauge R22/134A/404A 0 To 500 Psi/Bar pressure readings, R12/22/502 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

Low Side Universal Replacement Compound Gauge -30" to 120 Psi/Bar, Psi/kPa pressure readings, R-22 and R-134a temperature readings in degrees Celsius, Replaces 11692. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11795 Robinair High Side Refrigerant Manifold Gauge R22/134A 0 To 500 Psi/Bar pressure readings, R22/134A 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR. Replaces 11693

Replacement gauge lens, quarter turn on-off. Designed for ashcroft style gauges. Made of durable lexan for long life. 2.75" diameter.

11797 Robinair Low Side Compound Refrigerant Manifold Gauge R22/134a -30 To 125 Psi/Bar pressure readings, R22/134a -30 To 125 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

11798 Robinair High Side Refrigerant Manifold Gauge R22/134A 0 To 500 Psi/Bar pressure readings, R12/22/502 0 To 500 Psi/Bar temperature readings. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to re-calibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in either PSI or BAR.

Low Side Compound Refrigerant Manifold Gauge R410A, -30 To 500 Psi pressure readings,  Large, easy to read 3-1/8" (80mm) gauge protected by Lexan lenses. 1/8" Pipe thread connection. Zero Adjustable Gauges for easy calibration.  General usage gauges for multiple applications where pressure or vacuum readings are required. R410 Temperature scale reads in °F and pressure is displayed in PSI.

Calibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.

Calibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.

13067 Robinair High Vacuum Grease is a silcone based lubricant designed for high vacuum assembly applications. A stiff, nonmelting silicone lubricating material used to lubricate synthetic and silicone rubber gaskets being used in high temperature applications. High Vacuum Grease resists mineral oils and common gases and works well for a setting gel to capture o-rings during assembly.

Manifold Hanging Hook

Access Valve Core Remover With 6 Valve Cores

Stem Assy. Kit for Sidewheel Manifolds, with Face Seal (1996 to current models) includes stem with O-rings, spring and screw (will not fit Sightglass Manifolds)

Low Side Compound Refrigerant Manifold Gauge R410a -30 To 250 Psi pressure readings, R410a temperature scale. General usage gauges for multiple applications where pressure or vacuum readings are required. Dampening helps reduce excessive needle fluttering making the gauge much easier to read. Internal components are compatible with many industry applications. The ability to recalibrate the gauge is a standard feature on all gauges. Temperature scale reads in °F and pressure is displayed in PSI.

Vacuum Pump Oil Fill Plug For 15101B 15102B

Parts Kit For Manifolds And Hoses Contains an assortment of the most commonly needed replacement parts for repairing manifolds, hoses and various other A/C tools.

17772 Robinair 14mm O-Ring belongs on the machine thread end of a 134A hose nearest the coupler or on the seal between the two halves of a quick fitting.

17773 Robinair O-Ring For R-134a Quick Seal Fittings (2 Pack). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

Replacement Parts Kit for Manifolds, Hoses and A/C Service Equipment. Includes common replacement parts for servicing manifolds, charging hoses, and fitting adapters.

QUICK SEAL O-Ring Set (6 Pack), O-Rings made of durable silicone rubber for resilience and long life.  fits all 1/4" Flare Quickseal Hose Ends.

Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

Highside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18192 Robinair High/Low Side Service Couplers 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18319 Robinair Adapter 1/4 Female Flare X 1/2 ACME

O-Ring Kit For 18190A & 18191A Couplers

Valve Stem rebuild kit, for units with old style panel valves. Identifiable by the center screw holding the stem in place with plastic removable handles. This kit does not repair "Kantleak" style valves, those must be replaced with new valves.

Low Side Gauge For 25175a / 25200b

High Side Gauge For 25200b

Manifold Valve Stem Assembly For Sight Glass Manifold

These depressors fit behind and protrude through the hose gasket on 1/4" flare and 1/2 ACME standard fittings. If you are replacing hose gaskets it's a good idea to replace these as well.

These gaskets fit 1/4" flare and 1/2 ACME standard fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become smashed over time resulting in poor flow.

Gaskets For 3/8" Charging Hose (Pkg. Of 6)

Discontinued See 40232, 13148 manifold stems for complete replacement.

Hose Holder For All 4-Hose Manifolds

Stem Assembly Kit for Manifolds with Conical Seal (1995 and earlier models)

40302 1/2" ACME Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes. The only tools required are pliers and snap-ring pliers.

The installation torque for standard cores 2 – 5 in. lbs. [0.23 – 0.56 Nm]. Breakaway torque is not an accurate way to verify the installation torque due to material, lubricants and other conditions that may exist.

Robinair Red And Blue Lexan Manifold Handwheels, Wagon Wheel Type For Manifold gauge sets and Tube Cutters. Fits on most manifold stems and accessory valves for a universal application and can replace newer barrell style manifold hand wheels.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 25). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

Stem Assembly For 41400 Series Manifolds. includes stem, o-rings and spring. For best results always lubricate with vacuum grease before assembly.

Nut For Face Seal Manifolds

Low Side High Pressure Replacement Gauge 0-250, retard at 500,  Psi pressure readings, Vibration Free Gauge, R-410A temperature readings in degrees Fahrenheit on the gauge face. 1/8" MPT threaded mount. 41675 Robinair Low Side Compound Gauge For 41670 Discontinued See 13149

High Side High Pressure Replacement Gauge 0-800, Psi pressure readings, Vibration Free Gauge, R-410A temperature readings in degrees Fahrenheit on the gauge face. 1/8" MPT threaded mount.

Robinair Red And Blue Lexan Manifold Handwheels, Barrel Type For Manifold gauge sets and Tube Cutters. Fits on most manifolds stems for a universal application and can replace older wagon wheel style manifold hand wheels.

Discontinued Top Valve Assembly For Dial-A-Charge

Discontinued Charging Valve Assembly For Dial-A-Charge. 1/8 MPT fitting X 1/4 Male Flare with pressure relief valve. Includes a 1/4" Female Flare X 1/2" Male ACME Adapter for R-134A aplications. All Brass construction. Simple to install.

Discontinued Sight Glass For All Dial-A-Charge And Standard Cylinders (43282 Gasket Set Included)

Stem Assembly For Brass Manifolds

Discontinued Part Number (See 19427)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Discontinued Part Number (See 19427)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Low Side Universal Replacement Compound Gauge -30" 0-125 PSI
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

High Side Universal Replacement Gauge 0-500 Psi/Bar/kPa pressure readings.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Robinair proudly introduces the RAVG-1, one of the most sophisticated Digital Micron (vacuum) Gauges available for field service. Packaged in the same convenient case as our successful Digital Pressure gauges, this stand alone gauge is compact and can be used anywhere. The RAVG-1 Vacuum Gauge employs a sophisticated MEMS Pirani type sensor that directly measures flow. Unlike all other field service gauges on the market, the VG1 is NOT affected by temperature. The RAVG-1 Vacuum Gauge measures vacuum from Atmosphere to 10 microns in 6 different scales, and can withstand overpressure beyond 425 PSI without damage.