Wheel For Cart Style Stations

110138 Robinair Tinnerman Clips Speednut Bracket - 90 Degree. (5 Pack) for Upper Gray Shroud For Cart Style Recovery Units.

110973 Robinair Operating Manual For 15400 15600 Vacuum Pump. This is the original factory manual shipped with your unit. Available as Hard Copy and a download PDF file when you check out. You will receive both.

112364 Robinair O-Ring For R-134a Quick Seal Fittings (Each). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

112699 Robinair Oil Injector O-Ring

114692 Robinair Oil Bottle Cap for Oil Inject / Drain bottle, for 8 - 12 ounce oil injector bottles. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don't forget extra bottles (115642) for storing different oil types.

114693 Robinair Oil Bottle Cap (Less Liner With Holes) For Oil Injectors

These gaskets fit 1/4" flare and 1/2 ACME standard hose fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become crushed over time resulting in poor flow or restriction due to swelling. These are standard for some other vendors hoses as well.

12oz. Graduated Oil Drain - Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations, for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don forget extra caps (114692) for storing different oil types.

12oz. Graduated Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations. For storing alternative oils for injection & for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Includes cap & Level O-ring.

117680 Robinair Oil Level Sight Glass 15/16 - 20 UNEF For 15600 15400 15434 15120 model pumps.

123785 Robinair Discharge Oil Coalescing Filter O-Ring

123786 Robinair Discharge Oil Filter Canister O-Ring

123787 Robinair Discharge Oil Coalescing Element separates oil from vapors in the discharge gas stream so it can be returned back to the compressor. This filter can become plugged when a compressor fails from a burn out or overheating due to waxes normally found in refrigerants.

34700 Hose Adapt Kit. Relocate the 96" service hose connections from inside the machine on the manifold to the bulkhead outside the machine, and change the hose fittings to 1/2" ACME fittings so standard hoses can be used.

Keep recovery and recycling units operating at peak efficiency with a convenient maintenance kit. Contains one quick change filter-drier to be used on either R-12 or R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil.  Designed for newer units manufactured after 1998.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

Robinair Handle Power Cord Switch Assembly 15400 - 15600 Series Pumps. Kit includes Handle, Power Cord, Switch, butt connectors, screws for mounting and o-rings for the exhaust vent banjo bolt.

Base & Foot Assembly For 15400 / 15600 / 15434 Series Vacuum Pumps

Forward Pumping section for 6 CFM Vacuum Pumps. Includes Pump, Iso Valve Installed, drain fitting and oil fill cap. For model 15600.

ROBINAIR 6 CFM 2 STAGE ROTARY VANE VACUUM PUMP Thoroughly evacuate todays tighter systems with their increased sensitivity to contaminants. Iso-Valve isolates pump from system, making it easy to measure rate of rise.

Low Side Tank Adapter. 1/2" ACME Female X Lowside Spud used for tank fill and maintenance procedures. 1/2" ACME Female x Low-Side R-134a Coupler

Parts Kit For Manifolds And Hoses Contains an assortment of the most commonly needed replacement parts for repairing manifolds, hoses and various other A/C tools.

RO17641 Recycle Guard Hose Install Kit For R-12 and R-134A Installs. Comes Complete with hoses and fittings for Installation of a RO17622 RecycleGuard Filter.
Discontinued See the following part numbers
For R-134A Installation 1) RO19078 36" ACME Hose 1) MSC80296 1/8" MPT X 1/2" ACME Adapter
For R-12 / Other Gases 1) RO31036 36" Flare Hose 1) MSC90296 1/8" MPT X 1/4" Flare Adapter

17772 Robinair 14mm O-Ring belongs on the machine thread end of a 134A hose nearest the coupler or on the seal between the two halves of a quick fitting.

17773 Robinair O-Ring For R-134a Quick Seal Fittings (2 Pack). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

QUICK SEAL O-Ring Set (6 Pack), O-Rings made of durable silicone rubber for resilience and long life.  fits all 1/4" Flare Quickseal Hose Ends.

Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

Highside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18192 Robinair High/Low Side Service Couplers 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

1/4" 45 Degree  Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes.

19056 Robinair Heavy Duty Refrigerant Tank Strap With Buckle

19077 Robinair 36" Red Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

19078 Robinair 36" Yellow 1/2" ACME Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

19079 Robinair 36" Blue Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

O-Ring Kit For 18190A & 18191A Couplers

19740 Source Tank Filter For 134A units. Protect your investment from debris and harmful elements from tank manufacturing processes. Metal debris can foul solenoids causing unnecessary repairs and equipment failures. Install this filter on the hose end of your tank add hose to protect your machine. 100 mesh screen is replaceable or cleanable. 1/2" Female ACME X 1/2" Male ACME fittings Installs inline of tank fill hose.

Robinair Oil Injector Cap (Steel) & the fitting is a 1/8 MPT x 5/16" press in hose capture device that also holds the cap in place. The included cap has a hole for mounting and 2 weep holes for equalization.. Replaces all earlier white plastic caps. For all "Side-Winder" Style Recovery Units.

Lower Gray Shroud For Cart Style Recovery Units. Replaces all other color shrouds.

Replaces oil injector parts used on most machines with 8 oz. bottles and 5/16" diameter dip tubes. The fitting is a 1/8 MPT x 5/16" press in hose capture device that also holds the cap in place. The included cap has a hole for mounting and 2 weep holes for equalization.

The 34724 Robinair filter drier has been specifically formulated to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters. You must change the filter-drier to assure adequate moisture and contaminant removal. Typically, you can recycle up to 300 pounds (136 kilograms) of R-134a or 600 pounds (272 kilograms) of refrigerant between filter changes (depending on your model). To help you know when you’ve reached that point, the unit displays the warning message prompting you to change the filter drier.

50lb. R-134a Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve and a third port for vapor/air purge (a must for 3 hose recovery units). 50 lb. capacity refrigerant tank for R-134a with 1/2" ACME fittings. Fits models 12134, 34700, 17534, 17800 series

Robinair 34788 Combines Simple Operation With Superior Accuracy, Setting The Standard For SAE J2788 Standards For Accuracy And Speed. Robinair Is Ahead Of The Game With Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with superior accuracy. The Cool-Tech 34788 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed! Features Include, Fully Automatic Function, Vacuum Leak Test, Automatic Refrigerant Refill, Automatic Air Purge, Automatic Oil Drain, Refrigerant Charging, Refrigerant Management System, Vacuum Function.

Robinair 34788 Combines Simple Operation With Superior Accuracy, Setting The Standard For SAE J2788 Standards For Accuracy And Speed. Robinair Is Ahead Of The Game With Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with superior accuracy. The Cool-Tech 34788 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed! Features Include, Fully Automatic Function, Vacuum Leak Test, Automatic Refrigerant Refill, Automatic Air Purge, Automatic Oil Drain, Refrigerant Charging, Refrigerant Management System, Vacuum Function.

The Robinair 34998 Connected R-134A Machine recovers, recycles, evacuates, leak-tests and recharges R-134A with improved 98.5% efficiency – unmatched by any competitor. The new design features a large 10" capacitive touch LCD display, and automated features including automatic internal refrigerant refill, oil drain and refrigerant identification. The 3 also boasts full wireless capabilities for Wi-Fi or Bluetooth® communication, which enables automatic machine software updates and capacities database downloads. Use Google Cloud printing to print A/C service summary reports for customers or insurance companies. The Android operating system can also export service reports to store or share digitally.

These depressors fit behind and protrude through the hose gasket on 1/4" flare and 1/2 ACME standard fittings. If you are replacing hose gaskets it's a good idea to replace these as well.

These gaskets fit 1/4" flare and 1/2 ACME standard fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become smashed over time resulting in poor flow.

40302 1/2" ACME Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes. The only tools required are pliers and snap-ring pliers.

539668 Robinair Suction Accumulator Canister O-Ring

557648 Robinair 34724 Filter O-Ring Small

557649 Robinair 34724 Filter O-Ring Large

Main Power Switch Controls the power between the power cord and the main board.

96" Low Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

96" High Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

Set of Red/Blue 20’ Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant.

The Robinair AC1234-9 Connected R-1234YF ACS Machine recovers, recycles, evacuates, leak-tests and recharges R-1234yf with improved 98.5% efficiency – unmatched by any competitor. The new design features a large 10" capacitive touch LCD display, and automated features including automatic internal refrigerant refill, oil drain and refrigerant identification. The AC1234-9 also boasts full wireless capabilities for Wi-Fi or Bluetooth® communication, which enables automatic machine software updates and capacities database downloads. Use Google Cloud printing to print A/C service summary reports for customers or insurance companies. The Android operating system can also export service reports to store or share digitally.

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

Recent production changes may affect your placement of this pump. The new pump was designed for 17800B cart style Recovery Recycling Units Only. For all other applications See 15548 For Replacement pumping section or RA19902 as a possible replacement.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Fan Used to keep the unit hermetic compressor and electrical components cool.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Oil Drain / Injection Bottle Part Number Change See 17419
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

System Relay 115 volt coil, double pole single throw normally open switch with dual sets of 15 amp contacts. Acts as a pilot from the circuit board usually carrying higher amp loads to protect smaller relays on board. Can be used for universal applications due to the high amp contact rating.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115 Volt Grounded recepticle that acessories plug into
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Sonalert 17700 Sounds an audible tone when commands are programmed through the keypad.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

36" Low Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Hose 36" Yellow With Quickseal - Discontinued - See RO19078 Allows air pressure trapped at the top of the tank to enter the lower cavity of the air purge device during recycling.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

19079 Robinair 36" Blue Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

O-RING KIT A/Q FIT
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Faceplate Overlay Keypad attaches to the circuit board to select start,
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Lens - Discontinued - See RO19257
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Solenoid Rebuild Kit Normally closed Solenoid Rebuild Kit - Used to rebuild certain solenoids in manifolds or discrete (RA19006) etc..
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Check Valve Allows flow in one direction only and prevents pressure from back flowing into a particular path.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Power Cord 12134B Connects unit to power source outlet.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Check Valve, This kit includes 1 check valve & O-ring. Allows flow in one direction only, towards the recovery solenoid, and prevents refrigerant from escaping out of the inlet after recovery and during recycling, evacuation and shutdown.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Main Power Switch Controls the power between the power cord and the main board.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

High Pressure Switch If pressure inside the unit exceeds 435psi, the switch opens, stopping all functions of unit. NOTE: Switch opens at 435psi +/- 10psi and resets at 320psi +/- 20psi.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Vacuum Pump Protection Switch Normally open switch closes at 25psi and reopens at 10psi. Prevents vacuum pump from starting when pressure exists in vehicle's system.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Expansion Valve Meters the flow of refrigerant into the system oil separator. The allowable tolerance of the valve is 35 + 5 psi.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Circuit Board User interface for controlling refrigerant recovery, recycling, recharging, and other functions of the unit.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

108" High Side Red Hose R-134a - Discontinued - See RO19434 (14mm x 14mm, does not include coupler) ? Provides flow from the high side of an A/C system to the high side manifold valve. This hose attaches inside the unit. ? 17772 14mm O-Ring
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

DISC. See 19450 108" Low Side Blue Hose R-134a - Discontinued - See RO19435 (14mm x 14mm, does not include coupler) ? Provides flow from the low side of an A/C system to the low side manifold valve. This hose attaches inside the unit. ? 17772 14mm O-Ring
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Scale Assembly Single Sends a signal to the main board for accurate weight readings and tank overfill protection.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Air Purge Assembly R-134a - Discontinued - See RA19795 Used to purge excessive air from refrigerant tank during vacuum or recycle process.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

The internal fittings used in the manifold block style machines use o-ring bubble fittings instead of flare fittings and require o-ring replacements to seal properly. (10 Pack)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

O-Ring Maintenance Kit
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115v Solenoid Coil Coil only, used to energize a normally closed solenoid that, when energized, allows flow. i.e. Recovery, Charge, vacuum, etc. NOTE: RA19258 Solenoid Rebuild Kit
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Tank Strap Single Used to keep the tank in place when positioning the unit.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Panel mount manifold Valve Assembly. High and Low side Manual valves that control the flow of refrigerant into the unit. Valves measure 3.5" on center.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA19628 Robinair Push Button Oil Injector Assembly. Used to inject oil from bottle through panel valve, into vehicle.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Compressor Install Kit 17700 & 34700 Block Style Units To Use Cubigel Compressor
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115 Volt Cubigel Compressor (Replaces The RA17110, RA17434, RA19458, & RA19748) Includes all hardware and electrical for a complete install. See additional plumbing retrofit kits noted for older style units.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Check Valve Kit (Block Style Units) Prevents incoming refrigerant from opening the charge solenoid and entering the liquid side of the ISV.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Fastener Seal and hardware kit for Robinair recovery units is a service provider must have. This kit contains 38 of the most requested hardware and small maintenance items on most Robinair machines many of which are difficult or impossible to find by themselves, including gaskets seals, bolts and screws, pneumatic fittings, door latches, Torx screws, flare gaskets and other hard to find or specific related items. 3/8 Hose Gasket, 1/4 Fl Copper gasket, O'Rings, Screws Torx, Speed Nuts, Tinnerman U Clip, 1/2 Acme Jam nut, Pneumatic Fittings, Pan Head screws, Grommets, Door Latch Receptacle, Connector, Plastite connector, Bezel 7002K / 700Z, Door Latch Spring, Injector Bulkhead Fitting, Oil Injector Cap And Bulkhead Fitting, Vacuum Pump Fill Caps, Shreader Cores. Housed in a Double sided flip top case with extra space for other items.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.