Robinair 120v heater blanket speeds charging by maintaining a constant temperature at the tank, thus creating a positive pressure differential between the refrigerant source and the A/C system.

Refrigerant Pressure Temperature Chart For 41600 Series Manifolds or Universal Application. Lists 12 refrigerants including R-12, R-22, R-134A, R-410A, R-502, R-401A, R-401B, R-402A, R-402B, R-404A Fits conveniantly on the rear of 41400, 41600, 40100 series gauges with protector.

Float Switch Cable Makes the connection between the float in the tank and the system relay. When the tank reaches 80% capacity, the float interrupts the control voltage to the system relay causing the unit to shut down.

Optional Float Cable and Relay assembly for Portable Recovery Units: 25200B 25175A 25150A. Enables recovery units to operate with 80% float tanks. This item has been discontinued, see 19225 Cable & RA19133 relay as replacements.

360-80473-00 RTI Overfill Protection Cord 3' W\ Pin And Socket

74-099 CPS Magnetic Tank Thermometer. 48 Point Temp Label Magnet, 26°F To 120F° (-3°C To 49°C). These magnetic temperature labels provide a safe, accurate, easy-to-read means for monitoring temperatures. Indicating strips use liquid crystal technology to display the current temperature at an economical cost. The strip will turn green when ambient temperature is reached. Great for tank temperature monitoring during recovery processes or air purge procedures.

90637 Mastercool 3/4" Female Pipe Thread X 1/4" Male Flare Refrigerant Tank Adapter

Mastercool 98250 Electronic Tank Heater Blanket 120V

Mastercool 98250-220 Electronic Tank Heater Blanket 240V

AD41 CPS Tank Adapter 3/4"-14 Female Pipe X 1/4" Male Flare Drum Adapter. For use with large cylinders.

AD41B CPS Tank Adapter 3/4"-14 Female Pipe X 1/4" Male Flare Drum Adapter (100 Pack). For use with large 125 lb. cylinders.

AD61 CPS Tank Adapter 3/4"-14 Female Pipe X 3/8" Male Flare Drum Adapter. For large 125 lb. cylinders

AD71 CPS Tank Adapter 5/16" (1/2"-20 UNF) Male x 3/4"-14 Female

Brass tank adapter. 1/2" ACME male x 3/4''-14 female. For use with large 125 lb. cylinders.

AD81B CPS Tank Adapter 3/4"-14 X 1/2" ACME Male (100)

ADXFW CPS 3/4 Fiber Washer For AD Series 3/4 Tank Adapters (6-Pk)

The CRXOS1 CPS Oil Separator provides a simple but effective means to remove small amounts of oil in the recovery stream for cleaner gas. Use in conjunction with a filter drier for even cleaner refrigerant for recharging. Equipped with standard 1/4" flare fittings and an inlet hose. When recovery is complete, simply drain the unit with supplied valve. Includes mounting hardware.

CPS CR Series Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potetially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfulling your tank.

Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potentially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfilling your tank. When the recovery cylinder reaches 80% capacity, the unit is shut off via a relay in the machine. Simply change cylinders and restart the unit. Works with any size cylinder with a 3-pin Brad Harison Plug and includes a shorting cap for working with tanks without a float.

CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.

3/4'' NPS swivel to 1/4'' male flare cylinder valve adapter made in the USA. Has finger tight seal and includes gasket.

3/4'' NPS swivel to 3/8'' male flare cylinder valve adapter made in the USA. Has finger tight seal and includes gasket.

Ten pack of 3/4'' to 1/4'' NPS Refrigerant drum adapters with fiber gaskets made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.

Two pack of 3/4'' to 3/8'' NPS Refrigerant drum adapters with fiber gaskets made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.

Two pack of 3/4'' to 1/2'' NPS Refrigerant drum adapters with fiber gaskets made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.

Two pack of 1/2'' to 1/4'' NPS Refrigerant drum adapters with fiber gaskets made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.

Ten pack of 1/2'' fiber drum adapter gaskets made in the USA.

Ten pack of 3/4'' fiber drum adapter gaskets made in the USA.

KIT002 RefTec Optional Overfill Protection Kit Provides safe operation and prevents recovery cylinder overfilling during recovery process. Stops recovery unit when tank float reaches 80% capacity. Includes : ELT001, FCA002, ESW002

KIT003 RefTec Optional Overfill Protection Kit Provides safe operation and prevents recovery cylinder overfilling during recovery process. Stops recovery unit when tank float reaches 80% capacity. Includes : ELT003, FCA002, ESW002.

This module plugs directly into the wire harness of your PROMAX Recovery unit through a plug already installed on your machine. This allows you to recover unattended with out the danger of tank overfill or the need to have a scale present to weigh the tank.

This cable plugs directly into the wire harness of your PROVAX Recovery unit through a plug already installed on your machine. This allows you to recover unattended with out the danger of tank overfill or the need to have a scale present to weigh the tank. If your unit does not have the internal plug already installed, see KT-5002A.

For use with the PROVAX Refrigerant Recovery Machines that do not have internal wired jack for the KT-5002 overfill protection plug and cable. Some late model units do not have the 3 wire socket installed from the factory and this will be needed to complete the installation of your float cable kit.

Float Relay Interrupts power from the system relay. The Tank Full light comes on when the float opens the circuit.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

30lb Empty refrigerant tank cylinder
Use with the F6-DP Refrigerant Recovery Unit to hold refrigerant
1 year warranty
Made in the USA

50lb Empty refrigerant tank cylinder
Use with the F6-DP Refrigerant Recovery Unit to hold refrigerant
1 year warranty
Made in the USA

This cable plugs directly into the wire harness of your PROMAX Recovery unit through a plug already installed on your machine. This allows you to recover unattended with out the danger of tank overfill or the need to have a scale present to weigh the tank. If your unit does not have the internal plug already installed, see KT-5002A.

Refrigerant Tank Valve Assembly for large cylinders. Solid brass construction for durability and long life. The Valve is 3/4" Pipe Thread for hose connections and Tank Fitting. (Adapters are required for flared hose connections) and is ported "Blue Vapor / Red Liquid". Fits 3/4 Pipe Tank Bung Fitting. Dip tube not included. For hose adapters See our Drum Adapters Page.