AVC134C CPS 1/2" ACME Brass Cap With Chain Tether (2 Pack)

R-134a HI Side Service Port Caps (10 Pack)

AVC134L CPS R-134a LO Side Service Port Caps (10 Pack)

10-Pack of 1/4'' SAE Brass Caps.

10-Pack of R-410A 1/2''-20 UNF Brass Caps.

Bulk package of 100 1/2''-20 UNF Brass Caps.

2-Pack of 1/2''-20 UNF Brass Caps with Chain Tether.

25-Pack of 1/4'' SAE Brass Caps.

Bulk 100-Pack of 1/4'' SAE Brass Caps.

1/4" SAE Brass Cap With Chain Tether (2 Pack)

AVC4P CPS 1/4" SAE Plastic Cap (6-Pk)

1/4" SAE Plastic Cap w/Strap (6 Pack)

2-Pack of 3/8'' SAE Brass Caps with Chain Tether.

10-Pack of Premium Valve Cores.

25-Pack of Premium Valve Cores.

Bulk 100-Pack of Valve Cores.

Valve Core Kit. Includes 6 Valve Cores with Brass Cap in Plastic Vial.

1/4" SAE Hose Core Depressor (10-Pk)

(6) 1/4" SAE Hose Gaskets & (6) Core Depressors

(6) 1/2" ACME, 5/16" (1/2"-20 UNF) Gaskets & (6) Core Depressors

Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life.

Pocket Valve Core Tool w/ 4 Spare Cores

Dual Valve Core Tool (1/4" SAE Valves & Auto R-134a Valves)

TLVCS410 CPS Mini-Split 5/16" Female x 5/16" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 5/16" Male flare access fittings on the top).

TLVC410A CPS Mini-Split 5/16" Female x 1/4" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the top).

Valve Core Tool R134A 8 MM And 10 MM Late Model. Those stubborn 8 mm and 10 mm valve cores on those late model vehicles don’t stand a chance with CPS' heavy-duty valve Core Tool. Knurled diameter body lets this tool get the job done.

Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed with a stainless steel ball and brazed side fitting for durability and long life. (This tool has 1/4 Flare fittings on all ports).

Remove and install the valve core from a 5/16" (1/2"-20) male UNF access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (All 3 fittings on this tool are 5/16")

Rebuild kit for TLVC4 / TLVCS

Rebuild kit for TLVC410 / TLVCS410

AVC4PB CPS 1/4" SAE Plastic Cap (100-Pk)

TLVC6 CPS JRA 6mm Valve Core Tool w/ 4 Spare Cores

3/8'' SAE brass caps with chain tether. 100 count.

1/4" SAE Brass Cap With Chain Tether (100 Count)

Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the side and top).

R-134a Low Side Service Port Cap: This service port cap is the blue low side 15mm fitting (8 mm threads).

R-134a High Side Service Port Cap, 8mm: This service port cap is the red high side 17mm fitting (8 mm x threads).

R-134a High Side Service Port Cap, 10 mm: This service port cap is the red high side 17mm fitting (10 mm threads).

This kit contains 5 Different valve cores for R-12 & R-134a for Standard and Large Valves, as well as Valve core tools for Standard and Large Valve Cores.

Valve Core Assortment. Contains Standard R12 & R134a Valve Cores, Late Model GM High Flow Valve Cores, Volvo Valve Cores, R12 & R134a Valve Core-8mm, R-12 &134a Valve Core-10mm High Side.

2607 Service Port w/2614 Cap: This is the low side OE R134a service port (m13 x 1.0) use cap 2614 with this part.

2608 Service Port w/2614 Cap: This is the low side Ford service port (m10 x 1.25) use cap 2614 with this part.

2609 Service Port w/2617 Cap: This is the high side OE R134a service port (m15 x 1.0). The OEM part uses cap 2617 and the aftermarket uses cap 2615.

2610 Service Port w/2615 Cap: This is the high side Ford, GM and Chrysler service port (m12 x 1.5) use cap 2615 with this part.

2611 FJC Inc. R134a Service Port Cap - 10mm x 1.25 - HS Red (5 Pack)

R134a Service Port Cap - 10mm x 1.25 - HS Red: This service port cap is the red high side 17mm fitting (10mm x 1.25).

R134a Service Port Cap - 9mm x 1 - LS Blue: This service port cap is the blue low side 15mm fitting (9mm x 1.0).

R134a Service Port Cap - 8mm - LS Blue: This service port cap is the blue low side 15mm fitting (8 mm threads).

R134a Service Port Cap - 8mm - HS Red: This service port cap is the red high side 17mm fitting (8 mm x threads).

R134a Service Port Cap - 10mm x .75 - HS Black: This service port cap is the black high side 17mm fitting (10 mm x 0.75).

R134a Cap - 10mm - HS: This service port cap is the red high side 17mm fitting (10 mm threads).

R12 Termination Cap: This service port cap has 1/4" Flare (7/16" SAE).

ACME Cap - 1/2": This is the ACME 1/2" service port cap.

R12 Termination Cap: This service port cap has 3/16" Flare (3/8" SAE).

R12 Cap 1/4": This is the 1/4" R12 service port cap.

R12 Cap 3/16": This is the 3/16" R12 service port cap.

R134a Cap - LS: This is the blue low side import service port cap (9mm x 1.0)

R134a Cap - HS: This is the blue high side import service port cap (10mm x 1.25)

R134a Low Side CapR134a Cap - HS: This is the black low side import service port cap 15mm x 1.25 (8mm threads).

Standard Valve Core: These are standard air conditioning system service port valve cores.

GM High Flow Valve Core: These are GM High Flow air conditioning system service port valve cores.

JRA Valve Core: These are JRA High Flow air conditioning system service port valve cores.

Volvo Valve Core: These are Volvo air conditioning system service port valve cores.

R134a - 8mm - LS Valve Core: These are 8mm Low Side air conditioning system service port valve cores.

R134a - 10mm - HS Valve Core: These are 10mm High Side air conditioning system service port valve cores.

Master Valve Core & Cap Assortment: This kit provides you with 18 different part numbers for a total of 88 pieces fitting domestic and import air conditioning systems service ports.

: This assortment of replacement service port caps has two each of six part numbers.

Large Bore Valve Core Remover Tool: This item allows you to remove and install the Large Bore valve cores in late model vehicles.

Valve Core Remover Tool - Small: This item allows you to remove and install Standard valve cores.

Master Valve Core Remover/Installer. Universal R-12 134A Valve Core Removal Tool Set. Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver. This tool pays for it self the first time you use it. The tool removes standard R-12 cores as well as most R-134a cores on both Low & High Side Ports. Heavy brass construction with a fine chrome finish prevents corrosion and keeps the tool looking nice as well as easy to clean.

1/4" SAE Cap with strap: Repair item for the 6900 series of vacuum pumps.

6819 FJC Inc. R-1234yf Valve Core Remover / Installer. Remove and install 1234yf valve cores with no refrigerant loss. Covers standard and large valve cores for R-1234yf vehicles. Set of one Blue Low Side coupler and one Red High Side coupler. Fully adjustable. High quality brass construction.

Two pack of 1/2-16 ACME o-ring seal caps with retainer straps.

13494 1/2-16 Acme O-Ring Seal Cap

Ten pack of 1/4'' SAE gasket seal caps

One-hundred pack of 1/4'' SAE gasket seal caps made in the USA.

Five pack of 1/4'' SAE wrench style caps made in the USA. For use with A/C and refrigeration service. The brass to brass positive seal is for permanent installation.

Five pack of 1/4'' SAE plastic o-ring seal caps with plastic retainers made in the USA.

A31992-100 JB Industries 1/4" Plastic O-Ring Seal Cap w/Plastic Retainer Strap 100 Pack. Made in the USA.

Ten pack of 1/4'' SAE gasket seal caps with core removers. Made in the USA.

Five pack of 1/4'' SAE plastic core removers.

A31999 1/4" Valve Core: 1/4" valve cores PTFE / neoprene seal replacement valve core rated at a maximum of 800 psi and 220°F (104°C).

A31999-100 1/4" Valve Core: 1/4" valve cores PTFE / neoprene seal replacement valve core rated at a maximum of 800 psi and 220°F (104°C).

A31999-25 1/4" Valve Core: 1/4" valve cores PTFE / neoprene seal replacement valve core rated at a maximum of 800 psi and 220°F (104°C).

A32004 1/4" Valve Core Tool

Evacuation and recovery valve core remover tool. Plier type with a quick release trigger which punctures large holes into the line for discharge of a recovery unit. Fits 3/16'' to 7/8'' OD hard tubing.

Replacement hardened steel needle and gasket for A32100 evacuation and recovery tool.

1/4'' valve core remover tool by JB (A32500N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

Replacement core remover bit for A32500N.

Replacement Core Remover for A32525N and A32504

1/4'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

Ten pack of 5/8'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Two pack of 3/4'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Five pack of 3/16'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Twenty-five pack of 1/4'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Five pack of 5/16'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Twenty-five pack of 3/8'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Ten pack of 1/2'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-hundred pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-thousand pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

Three pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-hundred pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

P509 1/4" Cap, Hose & Coupler Gasket

P509-25 1/4" Cap, Hose & Coupler Gasket

P510 JB Industries CLA Series R134a Gasket 6 Pack

P90009 JB Industries 3/16" & 1/4" Coupler O-Ring 10 Pack

P90010 JB Industries NFT5-4 1/4" O-Ring 5 Pack

P90011 JB Industries NFT5-6 3/8'' O-Ring 5 Pack

P511 JB Industries 1/4" Cap Hose & Coupler Gasket 6 Pack

1/4'' valve core torque tool made in the USA. Sets the proper torque every time! Calibrated to precise torquing requirements for core valves, the tool will no longer tighten once proper torque is achieved. Eliminates guesswork which results in under or over torquing of cores

5/16'' valve core remover by JB (A32505N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

NFT5-4-25 JB Industries 1/4" O-Ring Seal Cap 25 Pack - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

NFT5-4-CJ JB Industries 1/4" O-Ring Seal Cap with Bulk Jar (500 Piece) - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

NFT5-5 JB Industries 5/16" O-Ring Seal Cap 5 Pack - 5/16" SAE cap. Package of 5. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

NFT5-8 JB Industries 1/2" O-Ring Seal Cap 3 Pack - 1/2" SAE cap. Package of 3. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax. As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-S250 JB Industries Core Max 1/4 Seat  - Tube/stub - 3 Pack

CM-S370 JB Industries Core Max 3/8 Seat  - Tube/stub - 3 Pack

CM-SNAP JB Industries SnapMate High Flow Service Quick Connector For CoreMax Valve Cores. The SnapMate service connectors are designed to provide quick connections to CoreMax Valve Cores as well as standard access valves. The Collets grip on the threads and are specifically designed for the Service Industry by providing quick and easy connections to all 7/16-20 (1/4" SAE 45º Flare) access valves.

CM-SS250 JB Industries Core Max 1/4 Seat/Saddle NIP - 3 Pack

CM-SS370 JB Industries Core Max 3/8 Seat/Saddle NIP - 3 Pack

CM-TRQ JB Industries Core Max Torque Wrench. The CoreMax Torque Wrench is used to properly install and torque the JB CoreMax valve into the CoreMax seat. The wrench is preset to 8 ft/lbs. of torque.

CM-VC003 JB Industries CoreMax High Flow Valve Core With Caps (3 Pack). The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.  As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-VC010 JB Industries CoreMax High Flow Valve Core With Caps (10 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

CM-VC025 JB Industries CoreMax High Flow Valve Core With Caps (25 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

5/16'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

P509-10 JB Industries 1/4" Cap Hose & Coupler Gasket 10 Pack

P511-10 JB Industries 1/4" Cap Hose & Coupler Gasket 10 Pack

A32535N JB Industries 5/16" Core Removal Tool

CM-VC100 JB Industries Core Max Valve With Cap (100 Pack) Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

Plastic access fitting cap with plastic strap to keep it secured.  For R-134a

026-80062-00 RTI Valve Core Tool R12

026-80192-00 RTI Valve Core Remover

026-80213-00 RTI Valve Core Tool R134a

026-80292-00 Discontinued See TLVC810 Valve Core Tool R134A 8 Mm And 10 Mm Late Model. Those stubborn 8 mm and 10 mm valve cores on those late model vehicles don’t stand a chance with RTI's heavy-duty 026-80292-00 Valve Core Tool. Its 5-1/4 in. length combined with its 3/4 in. knurled diameter body lets this tool get the job done. The use of a 3/8 in. wrench on the hex of either adds plenty of leverage.

Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver. This tool pays for it self the first time you use it. The tool removes standard R-12 cores as well as most R-134a cores on both Low & High Side Ports. Heavy brass construction with a fine chrome finish prevents corrosion and keeps the tool looking nice as well as easy to clean.

R134A Universal Large Bore Valve Core Remover

R134A Valve Core Remover And Installer. For small core fittings. R-134a Valve Core Remover Installer built with Ball valve design, No need to pump down a system for a simple core change. Controls refrigerant flow with 1/4 turn of the valve lever. Lever position also gives visual indication of whether valve is opened or closed. Solid brass construction High and low side fitting included.

Universal Valve Core Tool

Standard Valve Core Remover/Installer Assembly

Tip Pin And O-Ring For Valve Core Remover Kit 58490-377

Gm Large Bore Valve Core Remover/Installer Assembly

Jra R134A Valve Core Remover/Installer Assembly

Eaton R134A Low Side Valve Core Remover/Installer Assembly

Eaton R134A High Side Valve Core Remover/Installer Assembly

R134A Standard & Jra (M6) Valve Core Kit

R134A Eaton (M8 & M10) Valve Core Kit

1/4 Fl Quick Seal Caps (6 Per Pack)

Valve Core Remover (Access Valve Cores Not Included)

Valve Core Removal Kit (Complete W/6 Access Valve Cores)

Standard Access Valve Core (6 Per Package)

Standard Valve Core (10 Per Package)

Standard Valve Core (20 Per Package)

Large Bore Gm Valve Core (5 Pcs)

Large Bore Gm Valve Core (10 Per Package)

R134A Jra Valve Core (10Pcs)

R134A Domestic High Flow Valve Core M-8 (5Pcs)

R134A Domestic High Flow M-10 Valve Core (5Pcs.)

91335 Mastercool Master Charging Adapter Repair Kit (126 Pcs.) 126 piece assortment of replacement gaskets, o-rings and depressors for charging hoses and adapters. Also includes valve core removal tool and replacement valve cores. Consists of: 42010 1/4″ Gasket (20 pcs), 42014 1/4″ Depressor (20 pcs), 90368: 3/16″ Depressor (20 pcs) 90369 3/16″ Gasket (20 pcs), 90341 1/8″ O-ring (20 pcs), 92107 Quick Disconnect Gasket (10 pcs), 90377-001 Refrigeration Valve Core (10 pcs), 90378 GM Large Bore Valve Core (5 pcs).

R12/R134A Valve Core Repair Kit

Thread Repair Tool For 1/8? 3/16? And 1/4? Service Ports

Standard Valve Core Remover/Installer 1/4"

Replacement Tip & Pin For 91490 91496 & 91499

GM Large Bore Valve Core Remover/Installer 1/4"

Replacement Tip & Pin For 91491 & 91492

Gm Large Bore Valve Core Tool Shaft Only

Replacement Seal Kit For 91490-91491

1/4? X 3/16? Adapter For Standard Valve Core Remover/Installer

1/4" X 1/8" Adapter For Large Bore Valve Core Remover/Installer

Valve Core Service Tool W/Access Port

91498 Mastercool Valve Core Remover & Installer For R410A. Newly designed with patented locking mechanism, the 91498 is the only valve core remover kit that has a safety nut allowing the technician to freely access the valve core without fighting high pressures. Packaged in a blow molded carrying case, this kit also offers ½”-20 UNF and ¼” flare fittings for all refrigerant applications. Now you can charge the system without a valve core. The system can be “QUICK CHARGED” after removal of the valve core. Using manifold gauge set with valve lever in CLOSED position, connect the correct charging hose to the valve (Fig. 2A or 2B). OPEN the valve and charge the system. After charging, CLOSE the valve and disconnect the hose. Proceed with valve core installation.

Mastercool 92207 Refrigeration Gasket Depressor Assortment Kit consists of 42010 1/4" gaskets, 42016 screw type depressors and 85511 3/8" hose gaskets.

TR-C1, Thread size: .2108-36, red Teflon seal, Operating temp. -40 ° F- 302° F, operating pressure: 0-200 PSI

For removal and insertion of valve core. One end standard, one large bore.

One end is used for deflation, the other end to install or remove valve cores

200-3111 MotorVac Kit Vacuum Caps Rubber Lc.

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

Valve Core Remover / Installer Deep Core R-134A

Access Valve Core Remover With 6 Valve Cores

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly.

Thread Chaser For Use 18560 & 18561 Access Valve Core Remover / Installer. For use with No. 18560 or 18561, value core remover / installer. This thread chaser actually repairs damaged threads on valve cores in the service line, without releasing refrigerant into the atmosphere.

For use with No. 18560 or 18561, value core remover / installer. this extractor lets you remove damaged cores in the service line while the system is fully charged, without releasing refrigerant into the atmosphere.

1/2 ACME Cap & Strap (2 Pack) For 15224 / 15234 Series Vacuum Pumps or any ACME fitting

Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of vacuum and charging.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve.

These depressors fit behind and protrude through the hose gasket on 1/4" flare and 1/2 ACME standard fittings. If you are replacing hose gaskets it's a good idea to replace these as well.

The installation torque for standard cores 2 – 5 in. lbs. [0.23 – 0.56 Nm]. Breakaway torque is not an accurate way to verify the installation torque due to material, lubricants and other conditions that may exist.

40553 Robinair Gauge Quick Coupler Valve Core Depressor 1/8 FPT X 1/4 FFL

Never Lose that fitting cap on your recovery unit or tank again. Premium 1/4 Brass Cap With 3" Capture Chain. Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

1/2" Flare Cap

43150 Robinair –58° To 302° F In-Stream Superheat Thermometer / Valve Core Removal Tool Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the refrigerant directly. Connects directly to a standard 1/4" flare access fitting. Remove, test and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant, fast accurate measurements ensure to the degree temperature measurements for superheat or subcooling. A must have tool for the serious refrigeration engineer.

18080 Robinair 1/4" Compact Thumbscrew Core Depressor attach to standard 1/4" flare hose ends and allow the technician to control flow of gas by screwing in the depressor, it also allows the core to be "shut off" before removing the hose preventing finger burn.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 25). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.