604579 Associated Stop/Go Polarity Indicator Assembly
STOP/GO LITE Assembly will upgrade any battery charger clamp kit or repair an existing damaged light. A great safety feature for any battery charger. Fits Snugly inside a clamp lever and reads red for no-go, green for go, preventing reverse connection in poorly lit or unreadable conditions.
604592 Associated Stop/Go Polarity Indicator Lamp
604592 Associated Booster Cables STOP/GO LITE Assembly. This is the replacement light only (does not include resistor See 604579 for complete kit). For repair of an existing damaged light. A great safety feature for any battery charger. Fits Snugly inside a clamp lever and reads red for no-go, green for go, preventing reverse connection in poorly lit or unreadable conditions.
605211 Associated Lid Assembly
Lid Assembly with hinge, screws and rubber bumper pad. Replace your lid and keep those knobs from getting knocked off. Protects the switches and gauge s from damage and weather.
610189 Associated Fan Blade Kit
610189 Associated Fan Blade Kit, includes two blades with the same diameter, rotation, pitch and wings but differing shaft diameter for older units.
610190 Associated Fan Motor Kit With Blade 115 Volt
Universal Fan Motor Installation Kit includes everything needed to install on virtually any unit. Comes complete with a 115v. skeleton frame motor (reversible), equipped with 1/4" spade terminals for electrical connections, a fan blade, a set of 1/4" female spade terminal adapter leads, 1/4" Crimp-on female spades for alternate hook up, 2 sets of pin terminals for molex plug installation and 2 wire nuts.
611245 Associated 120 Minute Electronic Timer with Knob
611245 Associated 120 Minute Electronic Timer with Knob, for use in units with a 120 minute timer already installed. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals.
*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.
6200 Associated Side Terminal Adapter Pair
Need side terminal adapters? Model 6200 fits Associated and most other insulated clamps for easier connections. Side terminal adapters clip easily into place inside the clamp rivit and pull out of the way when not in use.
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start - Built for heavy truck, construction, agricultural equipment, and automotive applications. 6V, 12V, 18V & 24V Timed charger (allows up to 120 minute charger time). Wheeled ALL-WEATHER model designed for flooded lead acid batteries. 400A boost capability to start 12V vehicles with discharged batteries. Fan cooled, vacuum-impregnated transformer with multi-diode rectifiers. Polarity protection with safe stop/go light technology built into 500A clamps. Analog charge rate meters with 16 different variable charge rate capability. UL Listed 333M Battery Charger & CSA Listed for US and Canada. Made in the U.S.A.
Discontinued See 6002B