610189 Associated Fan Blade Kit
610189 Associated Fan Blade Kit, includes two blades with the same diameter, rotation, pitch and wings but differing shaft diameter for older units.
610190 Associated Fan Motor Kit With Blade 115 Volt
Universal Fan Motor Installation Kit includes everything needed to install on virtually any unit. Comes complete with a 115v. skeleton frame motor (reversible), equipped with 1/4" spade terminals for electrical connections, a fan blade, a set of 1/4" female spade terminal adapter leads, 1/4" Crimp-on female spades for alternate hook up, 2 sets of pin terminals for molex plug installation and 2 wire nuts.
610389 Associated 90 Minute Mechanical Timer w/ Hold Retro-fit Kit
This kit provides everything needed to replace older obsolete electrical driven timers with a new spring wound mechanical timer. The kit includes Knob, wiring and electrical connections, wire ties, spade terminals for universal applications and instructions.
*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.
Discontinued
611245 Associated 120 Minute Electronic Timer with Knob
611245 Associated 120 Minute Electronic Timer with Knob, for use in units with a 120 minute timer already installed. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals.
*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.
611254 Associated 120 Minute Electronic Timer with Knob Upgrade Kit
611254 Associated 120 Minute Electronic Timer with Knob, retrofit for units with a mechanical timer. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals.
*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.
6200 Associated Side Terminal Adapter Pair
Need side terminal adapters? Model 6200 fits Associated and most other insulated clamps for easier connections. Side terminal adapters clip easily into place inside the clamp rivit and pull out of the way when not in use.
Q720 QuickCable 70/65/30/280 Amp 6/12/24 Volt Automotive Battery Charger with Start
Q720 QuickCable 70/65/30/280 Amp 6/12/24 Volt Automotive Battery Charger with Start - Built for automotive, farm, fleet and powersport applications. 6V, 12V & 24V Timed charger (allows up to 120 minute charger time). Wheeled ALL-WEATHER model designed for flooded lead acid batteries. 280A boost capability to start 12V vehicles with discharged batteries. Fan cooled, vacuum-impregnated transformer with multi-diode rectifiers. Analog charge rate meter. CSA Listed for US and Canada. Made in the U.S.A.
Discontinued See ASO6006