OTC 1020 1-Ton, Grip-O-Matic Puller the mechanical Grip-O-Matic Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. Featuring: 1-Ton, 2-jaw, max. reach 2-1/8", max. spread 3-1/4", screw size 5/16"–24 x 3-7/8", jaw thickness 9/64" width 1/4".

OTC 1021 1-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like:  1-Ton, 3-jaw, Max. Reach 2-1/8" Max. Spread 3-1/4", Screw Size 5/16"–24 x 3-7/8", Jaw Thickness 9/64" Width 1/4".

OTC 1022 2-Ton Grip-O-Matic Puller the mechanical Grip-O-Matic Puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 2-Ton, 2-jaw (reversible jaws), max. reach 3-1/4", max. spread 4", screw size 3/8"–24 x 4-7/8", jaw thickness upper 3/16" lower 1/8" and jaw width upper 1/4" lower 1/2".

OTC 1023 2-Ton Grip-O-Matic Puller this mechanical puller removes and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 2-Ton, 2/3-jaw (reversible jaws), max. reach 3-1/4" max. spread 4-3/4", screw size 3/8"–24 x 4-7/8", jaw thickness upper 3/16" lower 1/8" and jaw width upper 1/4" lower 1/2".

OTC 1024 5-Ton Grip-O-Matic Puller this mechanical puller removes and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like:  5-Ton, 2-Jaw (Reversible Jaws), Max. Reach 3-1/4" Max. Spread 6", Screw Size 9/16"–20 x 6-15/16", Jaw Thickness Upper 5/16" Lower 1/4" and Jaw Width Upper 3/8" Lower 3/4".

OTC 1025 5-Ton Grip-O-Matic Puller this mechanical puller removes and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 5-Ton, Long 2-Jaw (Reversible Jaws), Max. Reach 5-1/2" Max. Spread 6", Screw Size 9/16"–20 x 6-15/16", Jaw Thickness Upper 5/16" Lower 1/4" and Jaw Width Upper 3/8" Lower 3/4".

OTC 1026 5-Ton Grip-O-Matic Puller this mechanical puller removes and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 5-Ton, 2/3-Jaw (Reversible Jaws), Max. Reach 3-1/4" Max. Spread 7", Screw Size 9/16"–20 x 6-15/16", Jaw Thickness Upper 5/16" Lower 1/4" and Jaw Width Upper 3/8" Lower 3/4".

OTC 1027 5-Ton Grip-O-Matic Puller this mechanical puller removes and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 5-Ton, Long 2/3-Jaw (Reversible Jaws), Max. Reach 5-1/2" Max. Spread 7",  Screw Size 9/16"–20 x 6-15/16", Jaw Thickness Upper 5/16" Lower 1/4" and Jaw Width Upper 3/8" Lower 3/4".

OTC 1028 Differential Bearing Puller for removing differential side carrier bearings on a wide variety of passenger cars and light trucks. Use with step plate adapters Nos. 8060, 8061, 8063, and 8064. (Step plate adapters are not included with 1028). With features like: Puller with 3-1/2" maximum reach, 1-1/4" to 4-1/2" spread. Primarily for servicing Ford products.

OTC 1031 Differential Bearing Puller for removing differential side carrier bearings on a wide variety of passenger cars and light trucks. Use with step plate adapters Nos. 8060, 8061, 8063, and 8064. (Step plate adapters are not included with 1031). With features like: Puller with 3-1/4" maximum reach, 6" maximum spread. For servicing most General Motors, American Motors, and Chrysler products.

OTC 10356 7-Ton Grip-O-Matic Puller this manual puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 7-Ton, 2-Jaw (Reversible Jaws), Max. Reach 5" Max. Spread 9", Screw Size 11/16"–18 x 9", Jaw Thickness Upper 5/16" Lower 11/32" and Jaw Width Upper 1" Lower 1".

OTC 1036 7-Ton Grip-O-Matic Puller this manual puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 7-Ton, Long 2-Jaw, Max. Reach 8-3/4" Max. Spread 9-1/2", Screw Size 11/16"–18 x 9", Jaw Thickness 11/32" and Jaw Width 1".

OTC 1037 7-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 7-Ton, 2/3-Jaw, Max. Reach 5" Max. Spread 10-1/2", Screw Size 11/16"–18 x 9", Jaw Thickness Upper 5/16" Lower 11/32" and Jaw Width Upper 1" Lower 1".

OTC 1038 7-Ton Grip-O-Matic Puller this manual puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 7-Ton, Long 2/3-Jaw, Max. Reach 8-3/4" Max. Spread 11", Screw Size 11/16"–18 x 9", Jaw Thickness 11/32" and Jaw Width 1".

OTC 1039 13-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 13-Ton, 2-Jaw, Max. Reach 11" Max. Spread 12", Screw Size 13/16"–16 x 12", Jaw Thickness 9/16" and Jaw Width 1".

OTC 1040 13-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 13-Ton, long 2-Jaw, Max. Reach 15-1/4" Max. Spread 15-/12", Screw Size 13/16"–16 x 12", Jaw Thickness 9/16" and Jaw Width 1".

OTC 1041 13-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 13-Ton, 2/3-Jaw, Max. Reach 11" Max. Spread 12", Screw Size 13/16"–16 x 12", Jaw Thickness 9/16" and Jaw Width 1".

OTC 1042 13-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 13-Ton, Long 2/3-Jaw, Max. Reach 15-1/4" Max. Spread 17", Screw Size 13/16"–16 x 12", Jaw Thickness 9/16" and Jaw Width 1".

OTC 1043 17-1/2-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 17-1/2 Ton, 2-Jaw, Max. Reach 14-1/2" Max. Spread 14", Screw Size 1"–14 x 13-1/2", Jaw Thickness 13/16" and Jaw Width 1-9/32".

OTC 1044 17-1/2-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 17-1/2 Ton, Long 2-Jaw, Max. Reach 18-3/4" Max. Spread 16", Screw Size 1"–14 x 13-1/2", Jaw Thickness 13/16" and Jaw Width 1-9/32".

OTC 1045 17-1/2-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 17-1/2 Ton, 3-Jaw, Max. Reach 14-1/2" Max. Spread 14", Screw Size 1"–14 x 13-1/2", Jaw Thickness 13/16" and Jaw Width 1-9/32".

OTC 1046 17-1/2-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 17-1/2 Ton, Long 3-Jaw, Max. Reach 18-3/4" Max. Spread 16", Screw Size 1"–14 x 13-1/2", Jaw Thickness 13/16" and Jaw Width 1-9/32"

OTC 1047 25-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 25-Ton, 2-Jaw, Max. Reach 15-1/2" Max. Spread 18", Screw Size 1-1/4"–12 x 15-15/16", Jaw Thickness 1-1/16" and Jaw Width 1-1/2".

OTC 1048 25-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like:  25-Ton, Long 2-Jaw, Max. Reach 22-1/4" Max. Spread 20", Screw Size 1-1/4"–12 x 15-15/16", Jaw Thickness 1-1/16" and Jaw Width 1-1/2".

OTC 1048 25-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 25-Ton, 3-Jaw, Max. Reach 15-1/2" Max. Spread 18", Screw Size 1-1/4"–12 x 15-15/16", Jaw Thickness 1-1/16" and  Jaw Width 1-1/2"

OTC 1050 25-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 25-Ton, Long 3-Jaw, Max. Reach 22-1/4" Max. Spread 20", Screw Size 1-1/4"–12 x 15-15/16", Jaw Thickness 1-1/16", Jaw Width 1-1/2".

OTC 1060 10-Ton Grip-O-Matic Puller this mechanical puller removes and installs parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. With features like: 2/3-jaw puller, Reach: 10" max, Spread: 17" max.

OTC 1062 17-1/2-Ton Hydraulic Push-Puller can be used with OTC part numbers 1124 and 1130 bearing pulling attachments or OTC 680 pulley pulling attachment . May also be used with OTC 1154 internal pulling attachment. Maximum reach: 18-1/2", Maximum spread: 5-3/4" — 11-3/4"
Note: Usable reach equals leg length minus 4-7/8" when using leg ends.

OTC 1063 17-1/2-Ton Hydraulic Push-Pulleran be used with OTC 1124 and 1130 bearing pulling attachments or OTC 680 pulley pulling attachment, may also be used with OTC 1154 internal pulling attachment. Ends of legs are threaded 5/8"–18. With features like: Usable reach: 11-5/8", Maximum reach: 18-1/2", Maximum spread: 5-3/4"–11-3/4" and Screw Size: 1"–8 x 20". Includes: Puller with OTC 1104 legs, OTC 24827 leg ends, OTC 4120 hyd. ram, OTC 32118 adjusting screw, and OTC 24814 adjusting crank.

1064 OTC 17-1/2 Ton 2-Jaw Grip-O-Matic Puller (Puller Only) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

1065 OTC 17-1/2 Ton 2-Jaw Grip-O-Matic Puller - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

1066 OTC 17-1/2 Ton 3-Jaw Grip-O-Matic Puller (Puller Only) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

1067 OTC 17-1/2 Ton Hydraulic Grip-O-Matic 3-Jaw Puller - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

OTC 1070 30-Ton Hydraulic Push Puller (Only) - Can be used with No. 1126 or 1127 bearing pulling attachments or No. 680 pulley pulling attachment (two No. 8012 adapters are required to connect No. 680 to puller).  Also may be used with No. 1166 internal pulling attachment.  Ends of legs are threaded 1" - 14.  Usable reach is 12-1/8".

OTC 1071 30-Ton Hydraulic Push Puller - Can be used with No. 1126 or 1127 bearing pulling attachments or No. 680 pulley pulling attachment (two No. 8012 adapters are required to connect No. 680 to puller). Also may be used with No. 1166 internal pulling attachment. Ends of legs are threaded 1" - 14. Usable reach is 12-1/8".

1072 OTC 30-Ton Hydraulic Grip-O-Matic 2-Jaw Puller (Puller Only) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

1073 OTC 30-Ton Hydraulic Grip-O-Matic 2-Jaw Puller - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

1074 OTC 30-Ton Hydraulic Grip-O-Matic 3-Jaw Puller (Puller Only) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

OTC 1075 30-Ton Hydraulic 3-Jaw Puller. The Hydraulic Grip-O-Matic Series of Puller No. 1060-1080 are available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller matched to your application. Lightweight ram can be used in other applications.

OTC 1076 50-Ton Hydraulic Push Puller - Can be used with No. 1128 and 1129 bearing pulling attachments.  Ends of legs are threaded 1-1/4" - 12.  Usable reach is 13-3/8".

1080 OTC 50-Ton Hydraulic Grip-O-Matic 3-Jaw Puller (Puller Only) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a versatile 2-jaw or 3-jaw puller. Lightweight ram can be used in other applications. You also get an adjusting screw, speed crank, and coupler where applicable. Hydraulic pump is not included; see index for pump listings.

OTC 1100 Puller Leg Set (6-3/4" Long) Extra Legs (pair) for No. 938 17-1/2 Ton Push-Puller, Leg Length 30" (Reach equals leg length plus 2" with leg end caps).

OTC 1101 Puller Leg Set (15-3/4" Long) Extra Legs (pair) for No. 927 10-Ton Push-Puller, Leg Length 15-3/4" (Reach equals leg length plus 1-1/2" with leg caps).

OTC 1102 Puller Leg Set (11-3/4" Long) Extra Legs (pair) for No. 927 10-Ton Push-Puller, Leg Length 11-3/4" (Reach equals leg length plus 1-1/2" with leg caps).

OTC 1103 Puller Leg Set (4-3/4" Long) Extra Legs (pair) for No. 927 10-Ton Push-Puller, Leg Length 4-3/4" (Reach equals leg length plus 1-1/2" with leg caps).

OTC 1104 Puller Leg Set (16-1/2" Long) Extra Legs (pair) for No. 938 17-1/2-Ton Push-Puller, Leg Length 16-1/2" (Reach equals leg length plus 2" with leg caps).

OTC 1105 Puller Leg Set (22-1/2" Long) Extra Legs (pair) for No. 938 17-1/2-Ton Push-Puller, Leg Length 22-1/2" (Reach equals leg length plus 2" with leg caps).

OTC 1106 Puller Leg Set (9-1/2" Long) Extra Legs (pair) for No. 938 17-1/2-Ton Push-Puller, Leg Length 9-1/2" (Reach equals leg length plus 2" with leg end caps).

OTC 1107 Puller Leg Set (4-1/2" Long) Extra Legs (pair) for No. 938 17-1/2-Ton Push-Puller, Leg Length 4-1/2" (Reach equals leg length plus 2" with leg end caps).

OTC 1108 Puller Leg Set (30" Long) Extra Legs (pair) for No. 938 17-1/2-Ton Push-Puller, Leg Length 30" (Reach equals leg length plus 2" with leg end caps).

OTC 1109 Puller Leg Set (8" Long) Extra Legs (pair) for No. 939 30-Ton Push-Puller, Leg Length 8" (Reach equals leg length plus 2-5/8" with leg end caps).

OTC 1110 Puller Leg Set (18" Long) Extra Legs (pair) for No. 939 30-Ton Push-Puller, Leg Length 18" (Reach equals leg length plus 2-5/8" with leg end caps).

OTC 1111 Puller Leg Set (28" Long) Extra Legs (pair) for No. 1070 30-Ton Push-Puller, Leg Length 30".

OTC 1112 Puller Leg Set (24" Long) Extra Legs (pair) for No. 1076 50-Ton Capacity Hydraulic Push-Puller, Leg Length 24"

OTC 1113 Puller Leg Set (34" Long) Extra Legs (pair) for No. 1076 50-Ton Capacity Hydraulic Push-Puller, Leg Length 34"

OTC 1150 Internal Pulling Attachment - Approved by leading bearing manufacturers, OTC’s internal pulling attachments remove bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1151 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1152 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1153 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1154 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1155 Basic Slide Hammer May be used with an internal pulling attachment or with internal or external-internal threaded adapters. 1155 – Basic slide hammer unit is 24" long with a 5 lb. hammer and a 5/8"–18 threaded end.

OTC 1156 Slide Hammer Unit - 2 1/2 Lb. - May be used with an OTC internal pulling attachment or with internal or external-internal threaded adapters.  Slide hammer unit is 24" long with a 2-1/2 lb. hammer and 5/8" - 18 threaded end.

OTC 1157 Slide Hammer Puller with Cup Pulling Attachment is ideal for removing bearing cups, outer races, and oil seals from blind holes.

OTC 1158 Slide Hammer Puller with Cup Pulling Attachment is ideal for removing bearing cups, outer races, and oil seals from blind holes.

OTC 1165 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1166 Internal Pulling Attachment - OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for use with a corresponding Push-Puller or slide hammer assembly.

OTC 1170 Pilot Bearing Puller This puller is built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor, generator, and magneto bearings.

OTC 1171 Pilot Bearing Puller has been built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks and tractors. Also very practical for pulling motor, generator and magneto bearings.

OTC 1172 Pilot Bearing Puller This puller is built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor, generator, and magneto bearings.

OTC 1173 Slide Hammer Puller is ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a jaw spread of 1/2" to 1-3/8", adjusted by turning the slide hammer handle. Handle end has a 1/2"–20 thread.

OTC 1174 Internal Pulling Head Assembly for use on the OTC 1173 Slide Hammer Puller. Jaw spread of 1/2" to 1-3/8", adjusted by turning the slide hammer handle.

OTC 1176 Reversible Jaw Slide Hammer Puller is for jobs involving gears, bearings, outer races, grease retainers,oil seals, etc. Two or three puller jaws may be used to handle 'inside" pulling jobs such as bearing cups and outer races, as well as regular 'outside" pulling jobs.

OTC 1177 Reversible-Jaw Slide Hammer Puller is for jobs involving gears, bearings, outer races, grease retainers,oil seals, etc. Two or three puller jaws may be used to handle 'inside" pulling jobs such as bearing cups and outer races, as well as regular 'outside" pulling jobs.

OTC 1178 Slide Hammer Puller Set - This useful set contains OTC's popular No. 1176 reversible-jaw slide hammer puller, plus an assortment of special jaws and adapters. You get all the versatility of the No. 1176, plus attachments for pulling various size pilot bearings, oil seals, bushings, timing gears, harmonic balancers, and other tightly fitted parts.

OTC 1179 Silver Slapper 8-Way Slide Hammer Set use for 2/3-way internal or external jobs. Pull flange-type rear axles, stubborn oil seals and bearings, and other press-fit parts.

OTC 1181 Slide Hammer Puller Set this assortment of puller tools gives you a wide range of job versatility. You get a 5 lb. slide hammer puller, hub puller, two sizes of OTC Grip-O-Matic® jaw-type pullers, a bearing pulling attachment, plus a cross-bar gear and pulley puller, all contained in a handy plastic storage case.

OTC 1182 Cone-Type Puller components can be assembled to create several versatile puller versions for both internal and external pulling tasks. The puller head is turned to securely lock the jaws onto the part being removed.

OTC 1184 Cone-Type Puller the reversible jaws permit handling of both internal and external pulling jobs. The 2-way/3-way head permits assembly of puller to suit the job at hand. Turning the cone on the puller head securely locks its jaws on the part to be removed.

OTC 1200 Manual Sleeve Puller Set this set works on a wide array of truck, bus, and tractor engines, as well as those in other vehicles. It can handle wet and dry sleeves - and you won't need to remove head studs. Save time, effort, and money.

OTC 1201 Installing Conversion Kit for 1200 Set - Permits the OTC 1200 sleeve puller to handle both removing and installing operations. Use OTC plate numbers 1253–1256 for installing, and plate Nos. 1219–1250 for removing. (Plates are not included with kit)

OTC 1202 17 1/2-Ton Hydraulic Sleeve Puller removes and installs sleeves of many makes and models of trucks, buses, and tractors.

1203 OTC 17-1/2 Ton Cylinder Sleeve Puller Set. These sets work on a wide array of truck, bus, and tractor engines, as well as those in other vehicles. They'll handle wet and dry sleeves - and you won't need to remove head studs. Save time, effort, and money. Manual Sleeve Puller Set: This manually operated, screw-powered device removes cylinder sleeves from most truck, bus, and tractor engines. Adapter plates (not included in the set) accommodate a wide range of bore sizes. The puller enables one technician to handle sleeve-pulling tasks. Not recommended for MACK engines (use No. 1202 set).

Wet-Type Sleeve Puller (Only) - This tool will remove cylinder sleeves faster than ordinary pullers because it requires very little setup time. Cone adjustment positions the puller jaws quickly, locking bar is tightened. To aid in breaking “frozen” sleeves loose, adjustable bridge is positioned on the cylinder block and the bearing-mounted forcing nut is tightened.

OTC 1219 Sleeve Puller Plate (3.600" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. See included chart for bore fitment of plates. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1221 Sleeve Puller Plate (3-9/16" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1222 Sleeve Puller Plate (3-11/16" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1223 Sleeve Puller Plate (3-7/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1225 Sleeve Puller Plate (3-7/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1227 Sleeve Puller Plate (4" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1230 Sleeve Puller Plate (4-1/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1230PB Protective Puller Blanket (12" x 30") Wrap around pulling, pressing, and other high-force jobs to protect you and your employees from work-related injuries as much as possible. Made of high tensile, tear resistant ballistic nylon – similar to military flak jackets – that, when tested, withstood the shattering of a neck-down grade 8 bolt without any visible damage.

OTC 1232 Sleeve Puller Plate (4-1/4" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1233 Sleeve Puller Plate (4-5/16" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1240 Sleeve Puller Plate (4-3/4" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1242 Sleeve Puller Plate (4-7/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1243 Sleeve Puller Plate (4-7/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1245 Sleeve Puller Plate (5" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1246 Sleeve Puller Plate (5-1/8" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1250 Sleeve Puller Plate (5-1/2" Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore and diesel engine fitment charts are contained within this item Description and Technical Specs tabs.

OTC 1252 Sleeve Installation Plate (3-3/16" to 3-7/16" Sleeve Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore fitment chart is contained within this item Description tab.

OTC 1253 Sleeve Installation Plate (3-9/16" to 3-7/8" Sleeve Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore fitment chart is contained within this item Description tab.

OTC 1254 Sleeve Installation Plate (4-1/8" to 4-3/8" Sleeve Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore fitment chart is contained within this item Description tab.

OTC 1255 Sleeve Installation Plate (4-3/8" to 4-3/4" Sleeve Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore fitment chart is contained within this item Description tab.

OTC 1256 Sleeve Installation Plate (4-13/16" to 5-3/4" Sleeve Bore Diameter) - This plate works with both the manual and 17-1/2-Ton hydraulic sleeve pullers. Bore fitment chart is contained within this item Description tab.

OTC 1675 13-Ton Cap. Puller Set - This versatile 13-ton capacity puller set removes gears, bearings, shafts, pinions, bearing outer races, and other tightly fitted parts. The set includes a Push-Puller, Grip-O-Matic® pullers, bearing pulling attachments, specialized pullers, and many accessories. You can work on all makes and models of cars and light trucks with this set.

OTC 1676 Strong Box Puller Set - Here's a set of pullers that gives you almost unheard of versatility. You get eight pullers, five attachments, and extra puller jaws. They enable you to pull gears, bearings, pulleys, wheels, and more on cars and light trucks.

OTC 1677 17 1/2-Ton Capacity Puller Set - This puller set gives you the versatility you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors, power shovels, road building machinery, etc.

17 1/2-Ton Hydraulic Puller Set .This versatile puller set removes gears, bearings, shafts, pinions, bearing outer races, and other tightly fitted parts. The set includes a Push-Puller, Grip-O-Matic® pullers, bearing pulling attachments, specialized pullers, and many accessories. You can work on all makes and models of cars and light trucks with this set. Features include a 5-ton capacity 2/3-jaw puller, 17-1/2 ton capacity hydraulic push-puller w/ 16-1/2" legs,  22-1/2" legs for p/n 1062 (pair), 34" legs for p/n 1076 (pair), 17-1/2 ton 3-jaw Grip-O-Matic puller, 17-1/2 ton 2-jaw puller head, Combination 2/3-jaw puller.

17 1/2- & 30-Ton Hydraulic Farm Implement Set

17 1/2- & 30-Ton Hydraulic Puller Set

17-1/2 30 50-Ton Master Puller Set

17 1/2 & 50-Ton Construction Equip Service Set

OTC 1688 17 1/2-Ton Capacity Hydraulic Puller Set - This puller set gives you the versatility you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors, power shovels, road building machinery, etc. Maintenance operations involving the removal and replacement of gears, bearings, wheels, and other press-fit parts can be done with ease.

OTC 1690 50-Ton Capacity Hydraulic Puller Set - This puller set gives you the versatility you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors, power shovels, road building machinery, etc. Maintenance operations involving the removal and replacement of gears, bearings, wheels, and other press-fit parts can be done with ease.

Collet 5/16

Collet 3/8

Collet 7/16

Collet 1/2

Collet 5/8

Collet 3/4

Collet 7/8

Collet 1-1 1/4

Collet 1-1/4 1-1/2

Collet 1-1/2 1-3/4

OTC 4122A 50-Ton Center-Hole, Power Twin® Ram -  In capacities of 17-1/2, 30, 50, and 100 tons and for operating pressures up to 10,000 PSI; use these rams on Grip-O-Matic® pullers, Push-Pullers, and shop presses. OTC’s center-hole rams are ideal for jobs that require a great deal of force and a relatively short stroke.

4120A OTC 17-1/2 Ton Hollow Center Hydraulic Ram With Adapter. Center-hole rams are ideal for jobs that require a great deal of force and a relatively short stroke. Compared to the force it develops, the ram is lightweight, compact, and easy to handle, permitting its use in confined quarters. Center-hole feature allows extending jacking screws, cables, puller screws, and more to be insterted through the ram. Engineered for increased strength and durability and meets the ASME B30.1 standards. For use with Grip-O-Matic pullers, push-pullers, and shop presses.

41224 OTC 2-Jaw Puller Head 17.5 Ton

OTC 4122A 50-Ton Center-Hole, Power Twin® Ram -  In capacities of 17-1/2, 30, 50, and 100 tons and for operating pressures up to 10,000 PSI; use these rams on Grip-O-Matic® pullers, Push-Pullers, and shop presses. OTC’s center-hole rams are ideal for jobs that require a great deal of force and a relatively short stroke.

OTC 4420 Pilot Bearing Pulling Attachment - Use to pull a pilot bearing from the end of the crankshaft. Interchangeable jaws. One set of jaws covers a spread of 1/2" to 1-1/2". Other set of jaws covers a spread of 3/8" to 1-3/8". Both sets of jaws have a reach of 1". Reach has a min/max range of 3/16" to 1‐1/4". Puller attaches to OTC and other slide hammers with 5/8"-18 thread.

OTC 4421 Pilot Bearing Attachment For Slide Hammer - Removes pilot bearings, thrust washers, and smaller bearings hidden in a shaft or housing. Jaws require a minimum of 5/8" opening and can range up to a max of 1‐1/2" diameter. Min/Max Reach is 1/8" to 1". Works with both 5/8 ‐ 18 as well as M18‐1.5 threaded hammer shanks.

OTC 4422 Pilot Bearing Puller - Use to pull a pilot bearing from the end of the crankshaft. A restriction plate catches the bridge and prevents the jaws from spinning when force is engaged. The "Tee Handle" design is easy-to-use and eliminates need for other tools. Spread covers ranges of 1/2" to 1‐1/2". Reach has a min/max range of 3/16" to 1".

OTC 4579 9-Way Slide Hammer Puller Set - Designed for use with other OTC 5/8"-18 thread slide hammer attachments. Pulls flange-type rear axles and most front-wheel drive hubs.

OTC 4581 Blind Hole Bearing Puller Set - For pulling jobs requiring an internal pull, such as pilot bearings. Set includes four collets which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, then attach the slide hammer assembly.

OTC 464 2-Ton Puller - OTC Three-in-One "Griplock" Puller manufactured to OTC's rigorous specifications to ensure the quality professionals expect from OTC.

OTC 465 5-Ton Puller - OTC Three-in-One "Griplock" Puller Manufactured to OTC's rigorous specifications to ensure the quality professionals expect from OTC.

OTC 4731A Honda / Acura Damper Holding Tool - Holds the dampener for removal or installation of the crank bolt on Honda/Acura engines. This tool has a 4" offset and provides proper fit for applications and allows use of impact tool to remove bolt.

OTC 4732 Honda / Acura Crankshaft and Harmonic Balancer Holder - Includes tool necessary to properly hold the rotation of the crankshaft pulley/harmonic balancer during removal and re-installation of crank bolt.

OTC 5028 Slide Hammer Puller - Just 8-1/2" long to fit into tight spots, but its 1-1/2 pound hammer gives you a little extra muscle for stubborn jobs. It's perfect for pulling injector nozzles. The shank is threaded 1/2" –20 and has a 5/8" –18 threaded adapter included. Works with many OTC pulling attachments.

OTC 525 Flange-type Puller Combination - This flange-type puller is used for the removal of harmonic balancers, timing gears, and other parts with two or three tapped holes. Includes flange-type puller and steering wheel puller with four sets of cap screws.

OTC 6284 Chrysler Harmonic Balancer Puller Set - This set allows the technician to remove and install harmonic balancers on the most popular Chrysler engines.

OTC 6501 1-3/4Lb. Slide Hammer - May be used with an OTC internal pulling attachment, or with internal or external-internal threaded adapters.

OTC 6541 Pulling Hook - This is an accessory for use with OTC 1155 Slide Hammer (5 lb) or OTC 1156 Slide Hammer (2-1/2 lb) and can be used with other slide hammers with 5/8"-18 threads. This attachment is used to remove seals, bearings and other press-fit parts.

OTC 6542Bearing Cup Remover - This is an ideal tool for servicing hubs on today's small FWD cars. It's perfect for pulling internal bearing cups, seals, and bushings.

OTC 680 Pulley Pulling Attachment - Attachment clamps down into V-groove to distribute load. Use with Grip-O-Matic® pullers or Push-Pullers.

The patented design of the OTC 6981 combines ease of use and range of application with economical value without sacrificing quality. Certainly not limited to automotive service, the OTC 6981 is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor or farm shop. The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling bridge for tight or stubborn fits. Either way, you'll be pleased with the performance of the OTC 6981 Blind Hole Puller Set. Having the right tool like the NEW OTC 6981 Blind Hole Puller Set keeps this service capability and revenue in your shop.

OTC 7071 Differential Housing Spreader - Removing or installing differential ring-gear assemblies on Dana axle models 30 through 70. It's a heavy-duty device using mechanical screw power to spread the housing. It helps prevent the component damage that often results from the use of homemade devices.

OTC 7119 Compressor Drive Gear Coupling Puller - Compressor Drive-Gear Coupling Puller Here's the solution for removing the coupling from the Cummins Compact and Bendix air compressors found on many Cummins 855 cubic inch engines. The split collet design fits over the coupling, and mechanical force does the work.

OTC 7122R Ford Lock Pin Remover - Removes tie rod inner socket retaining pin on Ford vehicles with rack and pinion power steering. Replacement tips available separately.

OTC 7185 Power Steering Pump Pulley

OTC 7245 Steering Wheel Puller - This puller removes steering wheels on most domestic and imported vehicles, with or without telescoping steering columns. Five sets of cap screws are included for various thread requirements.

OTC 7392 Gear And Pulley Puller

OTC 7394 Universal Hub Puller with Wrench -  Universal Hub Puller HD – the 'Final Answer" to frozen hubs, axle shafts, and other tough pulling applications.

OTC 7403 Steering Wheel Puller - Pulls steering wheel on most makes of late model cars. Supplied with five pairs of cap screws: 3/8-16 x 3-1/2”; 5/16-18 x 3-1/2”; 5/16-24 x 3-1/2”; M8-1.25 x 90mm; and 5/16-18 x 4” (SIR).

OTC 7494A Rear Axle Bearing Puller Set - For the removal of semi-floating rear axle bearings.

OTC 7575 Ford Radio Removal Tool Kit - These dual-purpose tools release the retaining clips of a radio faceplate so you can pull the radio from the instrument panel.

OTC 7703 Ten-Pound Slide Hammer Puller - This heavy-duty slide hammer puller gets tough with those really stuck parts. It has all the features of our smaller versions – heat treated, 24" long, and a 5/8"–18 threaded end to adapt to most pulling attachments.

OTC 7815 Steering Wheel Lock Plate Remover - Compresses the steering wheel lock plate to remove or install the snap ring. Needed for accessing the turn signal switch and S.I.R. modules on current GM vehicles.

Astro Pneumatic's 78444 44pc Master Radio Removal Set includes the u-hooks, wrenches and keys required to remove a wide variety of radios.  See Features for a detailed list.

OTC 7889 Steering Pivot Pin Remover - Tilt steering columns are much easier to service when your tool box has one of these pivot pin removers in it. Works on GM, Chrysler, and Ford vehicles with Saginaw tilt steering columns.

OTC 7927A Steering Wheel Remover / Lock Plate Compressor Set - Removing steering wheels of most domestic and imported vehicles, with or without telescoping tilt steering columns, is easy with this new set

OTC 7929A Steering Wheel Puller Leg Set

OTC 7947 Eight-Way Slide Hammer Puller Set. One of our most popular slide hammer puller sets, the No. 1179 Silver Slapper 8-Way Slide Hammer Puller Set, now comes packaged in a convenient plastic, blow-molded carrying/storage case.  It's the same great set with the same versatile puller and attachments, now made even better with the addition of an organizer case.  Or, if you already own the No. 1179 set, we offer the plastic case separately. Slide hammer puller sets have several pulling attachments to give the user various methods for pulling, maintenance, and repair applications; the slide hammer exerts force when needed.

OTC 8111 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8112 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8113 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8114 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8115 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8116 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8117 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8121 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8122 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8123 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8124 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8125 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8126 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8131 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8132 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8133 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8134 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8135 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8136 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8137 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8141 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8142 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8143 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8144 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8145 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8146 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8147 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

OTC 8148 Metric Internal / External Threaded Adapter - For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps pinions, etc. See chart in Product Features for specifications.

• For soft copper and aluminum tube
• Nine quick-change tube expanders
• Durable, color-coded, aluminum heads
• Compact, professional, patented design
• Strong carrying case

BTLGP4 CPS 2 & 3 Jaw Inside / Outside 4" Wheel Puller. Gear Puller Heavy Duty three-legged gear pullers with special yoke for two-legged pulling. 4 inch Quality 2 / 3 Leg Combination Gear, pulley and Bearing Puller. 2 / 3 legged combination bearing and gear puller can be use with either 2 or 3 legs dependent on how they are mounted on the head, 2 opposing lugs for 2 legged operation or the 3 lugs. Max Reach 89mm / Spread 76-102mm. Patented design enables fast configuration of two or three puller arms for inward or outward gripping positions.

BTLGP7 CPS 7" Wheel Puller 2 & 3 Jaw Inside / Outside 3"-7". Gear Puller Heavy Duty three-legged gear pullers with special yoke for two-legged pulling. All new Auto Grip 3-In-1 Gear Puller that comes with spring design to stabilize the jaws when gripping. 7 inch Quality 2 / 3 Leg Combination Gear, pulley and Bearing Puller. 2 / 3 legged combination bearing and gear puller can be use with either 2 or 3 legs dependent on how they are mounted on the head, 2 opposing lugs for 2 legged operation or the 3 lugs. Max Reach 89mm / Spread 76-178mm

OTCPA7 OTC Tools & Equipment 7-Ton Capacity Four-In-One™ Puller Set