Introducing the updated Solar 1002, a 12V 1.5A Underhood Battery Charger/Maintainer from SOLAR. Designed for permanent in-vehicle mounting, it properly services all lead acid battery types and requires no settings or adjustments. Perfect for service vehicles and a variety of fleet applications, simply connect an extension cord to its input lead and the 1002 will do the rest. With underhood mounting and automatic operation, the SOLAR 1002 combines supreme convenience and reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use and fleet batteries in top condition.

1.5 Amp 12 Volt Automatic On-Board Automotive Charger, on-board charging and automatic operation, the Solar 1002 combines convenience and reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use batteries in top condition. An accessory cord is provided, when a charge is needed simply attach the supply cord to the inlet tap and the charger does the rest, automatically charging the battery. When the charge is complete simply remove the cord and down the road you go. The unit can be mounted virtually any where, a fender, a supply box or directly on the battery.

The ATEC 3055A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/4 Amp, 12V/2 Amp, 12V/10 Amp & 12V/50 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

The ATEC 3075 Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/6 Amp, 12V/2 Amp, 12V/12 Amp & 12V/75 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (Only requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

The ATEC 3075A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/6 Amp, 12V/2 Amp, 12V/12 Amp & 12V/75 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

The ATEC 3100A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/8 Amp, 12V/2 Amp, 12V/15 Amp & 12V/100 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

4501 CHARGE IT! 0.8 Amp 12 Volt Battery Maintainer - The 4501 from CHARGE IT! delivers accurate, reliable and convenient charging to smaller batteries and maintaining to larger batteries. It provides 0.8 amps of charge via its automatic multi-stage charging sequence. It includes two output options: clamps or ring terminal adapters. Either can be connected using its quick attach harness, allowing the operator to choose the option that best meets their need. Its simple display indicates charging status. Meets efficiency requirements for sale in California and Oregon.

4502 CHARGE IT! 2.5 Amp 6/12 Volt Battery Maintainer - The 4502 from CHARGE IT! delivers accurate, reliable and convenient smart charging to a wide variety of battery types and sizes. Perfect for charging and maintaining the batteries found in cars, trucks, SUVs, vans, personal watercraft, motorsports vehicles, motorcycles and more. It delivers a 2.5 amp charge in 12 Volt mode via its automatic multi-stage charging sequence. Its small clamps are ideal for powersports, watercraft and other applications where access is difficult. Its display indicates charging status. Meets efficiency requirements for sale in California and Oregon.

4506 CHARGE IT! 6/2 Amp 6/12 Volt Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

4512 CHARGE IT! 12/6/2 Amp 12 Volt Smart Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

4520 CHARGE IT! 20/10/2 Amp 12 Volt Smart Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

The 7320 Associated 12 Volt To 12 Volt Automatic Battery Charger provides a safe automatic method of charging batteries on the go in vehicles trucks and industrial equipment. The High Power DC Source Charger provides accurate method of charging 12 volt lead acid batteries from a 12 volt (10-15 volt) source. Great for charging wheel chairs, electric scooters, or other batteries in a car, van or bus or utility vehicle as well as a power supply for lift gates on trucks and vans. The 4 stage, micro-processor controlled charger is perfect for charging sealed lead acid, VRLA, flooded and gel batteries with 10 VDC to 15 VDC input at 20 amps 14.4 volt output. Charge 12 volt lead acid batteries. Charge a small 12V battery from a large one, or from an automobile, truck, tractor or utility vehicle.

The ATEC 9002A combines reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use batteries in top condition by automatically powering on when needed. Shuts down when battery is fully charged. LED charging light indicates charging status. Reverse polarity and short circuit protection for added safety. Specifically designed for non-seasonal and cold weather maintenance of automotive batteries. Permanently attachable to battery tray. A durable plastic case prevents damage to charger from oil, water, gasoline and other automobile.

9003 Associated Automotive Battery Charger/Maintainer 6/12V .9 Amp Automatic AGM Or Lead Acid (New Old Stock).Slide switch control for 6 volt or 12 volt battery setting. Micro-processor controlled utilizing LED operating indicators. Reverse polarity and short circuit protection. Battery clamps as well as optional fused battery connectors. Safe for all battery types including AGM and GEL Cell Batteries.

9003A ATEC Automotive Battery Charger/Maintainer 6/12V 1 Amp Automatic AGM Or Lead Acid

9004A ATEC Automotive Battery Charger/Maintainer 6/12V 1.5 Amp Automatic AGM Or Lead Acid. Fully controlled by Microprocessor for Automatic Charge & Battery Maintenance. Internal overheat protection, ultra-low power consumption (ECO mode). Multi stage charging, Qualification – battery condition check, Battery rejuvenation, Soft start, Bulk Charging mode, Absorption charging, Voltage analysis, Float mode, Long term maintenance pulse charge. Safety features include: Short circuit and reverse polarity protection. Output clips and ring terminals provided with quick connect fly lead and 2 different types of connectors, clips and ring terminals. Foldable smart hook to hang or wall mount during use. Safe for all 12V lead acid battery types - Conventional, AGM and Gel Cell

This automotive charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge) as well as "DEEP DISCHARGE RECOVERY" and best of all it's Made in America.

9640 Associated  Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status.  For standard automotive, deep-cycle, AGM and GEL Cell Batteries

BEX-1500 Auto Meter 12 Volt 1.5 Amp Battery Extender - Battery extenders keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated. Maintain stored batteries at full charge to maximize battery life. Compatible with all Lead Acid Batteries: Standard (Flooded), AGM and Gel Cell. Parasitic drain protection. Fully automatic “smart” charging with advanced circuitry enables energy efficient and safe charging via Auto Meter’s advanced software and digital circuitry.

BEX-3000 Auto Meter 12 Volt 3 Amp Battery Extender - Battery extenders keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated. Maintain stored batteries at full charge to maximize battery life. Compatible with all Lead Acid Batteries: Standard (Flooded), AGM, and Gel Cell. Parasitic drain protection. Fully automatic “smart” charging with advanced circuitry enables energy efficient and safe charging via Auto Meter’s advanced software and digital circuitry.

BEX-5000 Auto Meter 6 / 8 / 12 / 16 Volt 5 Amp Battery Extender - Battery extenders keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated. Maintain stored batteries at full charge to maximize battery life. Compatible with all Lead Acid Batteries: Standard (Flooded), AGM, and Gel Cell. Parasitic drain protection. Fully automatic “smart” charging with advanced circuitry enables energy efficient and safe charging via Auto Meter’s advanced software and digital circuitry.

The BPC-100 saves valuable labor with Fast Charging and option to charge up to 8 Batteries in a pack at once.

BUSPRO-360 Auto Meter 120 Volt 5 Amp 3 Station 12 Volt AGM Automotive Battery Charger - 110 volt BusPro-360 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specific.

BUSPRO-361 Auto Meter 110 Volt 10 Amp 3 Station 12 Volt AGM Automotive Battery Charger - 110 volt BusPro-360 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specific.

BUSPRO-600S Auto Meter 115 Volt 5 Amp 6 Station 12 Volt Automotive Battery Charger - BusPro Series chargers utilize individual transformers and microprocessors for both low and high volume battery charging applications. This allows each channel to work independently and charge the battery correctly and in a timely manner. The BusPro-600 has a 5 amp per channel maximum with a 115 volt AC input.

BUSPRO-620S Auto Meter 220 Volt 5 Amp 6 Station 12 Volt Automotive Battery Charger - BusPro Series chargers utilize individual transformers and microprocessors for both low and high volume battery charging applications. This allows each channel to work independently and charge the battery correctly and in a timely manner. The BusPro-620s has a 5 amp per channel maximum with a 220 volt AC input.

BUSPRO-660 Auto Meter 110 Volt 5 Amp 6 Station 12 Volt Smart Automotive Battery Charger - 110 volt BusPro-660 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specifically designed for the proper and safe charging and maintenance of AGM batteries which makes overcharge impossible.

BUSPRO-662 Auto Meter 220 Volt 5 Amp 6 Station 12 Volt Smart Battery Charger - 220 volt BusPro-662 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specifically designed for the proper and safe charging and maintenance of AGM batteries which makes overcharge impossible.

Clean Power Supply gives 100 Amps of clean, non-fluctuating power for vehicle computer flash reprogramming. Adjustable voltage output from 13.8 to 14.4V. Digital display shows output voltage. For complex vehicle maintenance and showroom installations. Works with Flooded, Deep Cycle & AGM Batteries. A Must Have for Updating Automotive On Board Computers

DCA-8000P Midtronics Diagnostic Charging System, Conductance Profiling and Dynamic Charge Acceptance, Manual Charge Mode, Jump Start Mode, Reflash Mode, Includes Integrated Printer. Combined with Conductance Profiling™, enables quick and accurate battery
diagnosis, avoiding time wasted charging bad batteries. Mimics the
start event with a large load, then applies a charge for a short period
time. Performs critical diagnostics to verify battery can support
start-stop applications

6/2A Charge Maintain 15/40A Boost / Service Mode. Boost mode – quickly brings deeply discharged battery back to life. Service mode – maintains voltage at 13.6V to prevent discharge. 125A Engine Start – Powerful enough for SUVs, trucks and large engines. Built in battery tester. Scrolling digital display. Heavy-duty construction with 125A clamps with copper cable. Built-in cord management. Auto voltage detection. Reverse hook-up protection. Schu Eco Energy ─ meets the highest industry standards.

The Associated ESS6100 is a 100 A high power Smart charger Power Supply with inverter technology. It allows you to Keep a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

GRX-3000 Midtronics Battery Diagnostic Station 6 & 12 Volt Midtronics GRX-3000 Battery Diagnostic Station. Easy-to-use scalable solution designed to support full-service battery management programs. Fast, accurate and reliable, the GRX can determine, often in less than five minutes, the difference between a recoverable battery and one that is not. Diagnostic charging is uniquely designed to continuously monitor the charging progression. Each session is customized and highly controlled charging stops as soon as a battery can be returned to the customer or is determined to require replacement. Defective batteries with open welds and shorts are identified rapidly and recoverable batteries are quickly and safely charged, putting your customers back on the road faster. The GRX diagnostic station delivers better efficiency in the shop, clearer test results and more accurate preventative maintenance decisions by helping to eliminate guesswork and wasted time charging defective batteries.

GRX-3000 Midtronics Battery Diagnostic Station 6 & 12 Volt Midtronics GRX-3000 Battery Diagnostic Station. Easy-to-use scalable solution designed to support full-service battery management programs. Fast, accurate and reliable, the GRX can determine, often in less than five minutes, the difference between a recoverable battery and one that is not. Diagnostic charging is uniquely designed to continuously monitor the charging progression. Each session is customized and highly controlled charging stops as soon as a battery can be returned to the customer or is determined to require replacement. Defective batteries with open welds and shorts are identified rapidly and recoverable batteries are quickly and safely charged, putting your customers back on the road faster. The GRX diagnostic station delivers better efficiency in the shop, clearer test results and more accurate preventative maintenance decisions by helping to eliminate guesswork and wasted time charging defective batteries.

The INC-800A Schumacher 80/70/20 Amp 6/12 Volt Deep Cycle Battery Charger fully automatic, microprocessor controlled charger with Dual mode charging current. Two distinct charging modes: FAST Charge – 80A, 35 minute setting & FULL Charge – 240 minute operation. Reverse polarity and short circuit protection will ensure this until will not apply current to the output connect until it is properly connected. Patent pending 'thermal runaway' protection stops charging if the charger detects that there is a problem with the battery. Large, easy to read LCD display – countdown timer shows time of charge remaining, charger mode selections and battery voltage at start-up.

Power and convenience. The K3152-1 packs 50% more charging and starting power than most portable chargers, plus features automatic 12-volt settings to shut output OFF at full charge, but turns the unit back on if the battery discharges for any reason, also a highly requested manual mode for those times a battery just wont take a charge from a automatic unit. Charges 6 & 12 volt batteries, deep cycle marine batteries and provides reverse connection protection. Great Tools become great sellers because people know they can depend on them to do the job every time. That's why equipment from Century have been top sellers for more than 60 years.

Power and convenience. The K3153-1 packs 50% more charging and starting power than most portable chargers, plus features automatic 12-volt settings to shut output OFF at full charge, but turns the unit back on if the battery discharges for any reason, also a highly requested manual mode for those times a battery just wont take a charge from a automatic unit. The K3153-1 Charges 6 & 12 volt batteries, deep cycle marine batteries and provides reverse connection protection. Features include, Automatic charge setting for Deep Cycle type batteries. Automatic setting will turn off when battery is fully charged and resumes if discharged. Manual setting for charging discharged batteries or activating new ones.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

PL2112 Solar Pro-Logix 12V 1 Amp Lithium Battery Charger / Maintainer. Charges Conventional, AGM, Spiral Wound, Deep Cycle, Marine and Lithium (LiFePO4) batteries. PRO-LOGIX battery chargers from SOLAR are designed to provide continuous operation in a wide variety of professional and industrial battery service environments. They combine fully automatic operation utilizing a proprietary multi-phase charging process with the ability to properly charge multiple battery types. Advanced charging logic, robust components, quick set-up and smart display feedback mean effective and efficient charging for your operation.

The SOLAR PRO-LOGIX PL2140 automatic automotive battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a lead- acid battery installed in a vehicle, Flooded, AGM, Spiral Wound, Marine, Deep Cycle and LiFePO4, it can be charged and charged right with PRO-LOGIX. Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2310 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2310.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2320 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2320.

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2410.

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2520.

The new 4-bank Battery Maintenance Station, Model No. PL4020, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

The new 4-bank Battery Maintenance Station, Model No. PL4050, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

PL6100 Solar Pro-Logix 12 Volt 60/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

PL6800 Solar Pro-Logix 12 Volt 100/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

PLA53 Solar Pro-Logix Ring 12V Male Cigarette Lighter Plug for PL2135 Charger. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps.

PLA61 Solar Pro-Logix 5' Clamp Set For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61. SOLAR Pro-Logix automatic battery maintainers control many variables through each phase of the charging process to ensure an optimal charge every time.

PLA62 Solar Pro-Logix 10' Extension Cable For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA63 Solar Pro-Logix Short Clamp Set For PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA64 Solar Pro-Logix Short Length Ring Terminal Kit for PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

XC10-CA Schumacher 10 Amp Automatic Micro Processor Automotive Charger with Auto Voltage Detection - 10 amp fast charge and 3 amp maintainer this charger works well for most charging applications. This unit automatically adjusts the amperage rate while charging and maintaining the battery connected. With multistage charging for added precision, safety and battery life and it has float mode monitoring to automatically maintain the optimum battery charge. Auto selects between 6 and 12 volts and it has reverse polarity protection to keep you and your equipment safe should the clamps be connected to the wrong battery terminal.

XC103-CA Schumacher 100 / 30 / 12 / 2 Amp Automatic Micro Processor Automotive Charger, CEC Approved - 100A Engine Starter | 30A Booster | 6<>2A Charger/Maintainer. For Advanced Diagnostic Testing, Engine Starting & Charging. Powerful enough for starting SUVs, trucks and large batteries. Battery and alternator tester ─ provides charge level and helps diagnose electrical problems. Digital display, LED indicators and button controls ─ for ease and accuracy. Microprocessor controlled ─ automatically adjusts the amperage rate to charge and maintain. Multi-stage charging for added precision, safety and battery life. Float mode monitoring ─ automatically maintains optimum battery charge. Auto voltage detection ─ 6 or 12 volt. Reverse hook-up protection ─ charger will not operate if clamps are reversed; LED will flash. Energy efficient ─ meets the highest industry standards.

XM1-5-CA Schumacher 1.5 Amp Fully Automatic Battery Companion, CEC Approved - 1.5 Amp fully automatic battery maintainer. Ideal for motorcycle, car & marine batteries. Microprocessor controlled - automatically adjusts the amperage rate to charge and maintain the battery. Multi-stage charging for added precision, safety and battery life. Float mode monitoring - automatically maintains optimum battery charge. Auto voltage detection - determines if the battery is 6 volt or 12 volt. Quick connect harness - allows for fast connection and removal. Reverse Polarity Protection - charger will not operate if the clamps are reversed - LED indicator will flash as notification.