Product Features
- Reversible head for best viewing
- Field calibrateable to ±2°F
- Easy-to-read LCD
- Data Hold for hard to reach areas
- Penetration tip
- Auto off
- 3-year limited warranty
- Auto Field calibrate to ±2°F in less than 10 seconds in ice water
- Temperature range -58°F to 300°F
310 FEATURE: Reverse LCD to gain best viewing angle
Insert small coin into notch and gently pry while turning head to new 180° viewing position. Shielded wires keep head and stem from separating. Head easily snaps back into original position.
Model 310C Applications
HVACR
- Ambient air
- Calibrate Thermostats
- Vents
- Compressor heads
- Registers
FOOD
- Grill and Surface Temperatures
- Serving Temperatures
ELECTRICAL
- Motor Temperatures
- Transformer Temperatures
Model 310C Specifications
- Temperature Range: -58°F to 300°F (-50°C to 150°C)
- Accuracy: +/-2°F (+/-1°C)
- Resolution: 0.1°F/°C
- Sample Rate: 1 reading every 1.5 second
- Stem Length: 4.9”
- Tip Type: Penetration
- Water Resistant: N/A
- Water Proof: N/A
- °C / °F Selectable: Yes
- Data Hold: Yes
- Auto Off: Yes
- Battery Type: LR44
Get more accurate readings by using the right tip for your themometer:
- Penetration: Use for immersion and air; air response time will be slower than if using anactual air probe.
- Chisel: Need chisel tip for surface temperatures. Penetration and/or air tips will not givean accurate surface reading.
- Air: Samples air temperatures three times faster than penetration or contact tips.
- Contact: Measures three times faster than chisel tip.
- Needle: Use for immersion and semi-solids. Low mass, quick response, small diameter penetration.
|
