100122 PROMAX Provax Black Knob
100123 PROMAX Provax Blue Knob
100124 PROMAX Provax Red Knob
121917 Promax Power Recepticle 15 Amp
50lb. R-12 / Universal Gas Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve. 50 lb. capacity refrigerant tank for R-12, R-22, R-502 (universal) with 1/4" Flare fittings
518638 Robinair 15 Amp Magnetic Circuit Breaker provides protection of main electrical input. Single Pole 15 Amps 125-250 AC. Mounts Via Snap In Bezel. Terminal Connection 0.250 Spade terminals.
RG6000 Case Half (right)
RG6000 Grommet
551628 PROMAX Power Cord 115 Volt 14 Gauge
Valve Plate, no valves or springs. When purchasing this it is customary to purchase the rebuild kit as well, found here.
CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.
EL1310 PROMAX On/Off Switch
GA1000 PROMAX Gauge Lens
For use with the PROVAX Refrigerant Recovery Machines that do not have internal wired jack for the KT-5002 overfill protection plug and cable. Some late model units do not have the 3 wire socket installed from the factory and this will be needed to complete the installation of your float cable kit.
1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.
The RG6 is engineered to include what technicians need in a recovery machine – a rugged and tough machine with fast recovery rates. The RG6 is built for speed providing the best refrigerant recovery speeds in all conditions, including high temperatures.
Having a hard time keeping up with work flow in a salvage yard or appliance recycling center? Recovering refrigerant can be time consuming and difficult to manage. This exclusive package from Century allows for the recovery of refrigerant from up to 10 appliances at one time making salvage operations quick and easy. Our package solution offers you the ability to recover 100 or more appliances a day making your work easy and profitable. Our trained staff can even custom build one for you tailored to specific needs.
SB2013 PROMAX 2-013 Neoprene "O" Ring
SB2026 PROMAX 2-026 Neoprene "O" Ring
SB2027 PROMAX 2-027 Neoprene "O" Ring
SB2115 PROMAX Piston Seal O-Ring
SB3005 PROMAX Slide Ring
SB6001 PROMAX Piston Seal
This cable plugs directly into the wire harness of your PROMAX Recovery unit through a plug already installed on your machine. This allows you to recover unattended with out the danger of tank overfill or the need to have a scale present to weigh the tank. If your unit does not have the internal plug already installed, see KT-5002A.
RG6000 Inlet Fitting / Filter Screen Kit (includes inlet fitting, filter screen, o-ring)
RG6000 Filter Drier Kit (Includes Filter Drier, 6 Inch Hose)
SK-6003 PROMAX RG6000 Low-side Gauge Replacement Compound Gauge -30" to 240 Psi/Bar
RG6000 Motor Kit (includes motor, relay)
SK-6006 PROMAX RG6000 Compressor Rebuild Kit Compressor Rebuild Kit (Includes piston Seals, Valves, Springs, O-rings) and instructions. Includes parts for both cylinders.
SK-6007 PROMAX RG6000 / RG3000 Valve Rebuild Kit (Includes Inlet / Outlet Valves and Springs, O-rings). Includes parts for two cylinders.
RG6000 Fan Kit (includes fan, spacer mounting hardware)
RG6000 Bezel Kit (includes bezel, power switch, circuit breaker, power entry module, hardware)
RG6000 Condenser Kit (Includes condenser assembly, hardware)
SK-6015 PROMAX RG6000 Piston Seal Rebuild Kit (Includes Piston Seals, Energizer O-ring, Wear Bands). Repair parts for both cyclinders.
RG6000 Inlet Manifold Kit (includes manifold assembly, hardware)
RG6000 Compressor Kit (includes compressor, cover, counter balance, hardware). Rebuild you compressor with this completely assembled compressor head. Ataches to the motor in just minutes.
SK-6022 PROMAX RG6000 High-side Gauge Replacement Gauge 0-800 Psi/Bar
