100123 PROMAX Provax Blue Knob
100124 PROMAX Provax Red Knob
1/4" Flare Filter for ProMax and MiniMax Units Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting.
100345 PROMAX Hose, Blue, 4" Long
121917 Promax Power Recepticle 15 Amp
50lb. R-12 / Universal Gas Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve. 50 lb. capacity refrigerant tank for R-12, R-22, R-502 (universal) with 1/4" Flare fittings
RG6000 Grommet
551628 PROMAX Power Cord 115 Volt 14 Gauge
565501 Promax Front Bezel
565502 Promax Gauge Lens 2.25"
565504 Promax Compressor Assembly RG3-RG3000
565505 Promax Plastic Case (Both Sides)
565616 Promax Inlet Copper Tube
565617 Promax Motor Capacitor
CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.
EL1310 PROMAX On/Off Switch
FLCK-1 PROMAX Filter Conversion Kit (Replaces MF1275 Swivel). Allows for use of common Filter Drier. Includes: 100343 Filter Drier, 100345 Blue 4" Hose, Flare Adapter Fitting, 1/4 seal cap with retaining strap.
1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.
The RG3 from Promax sets the new standard in refrigerant recovery. All jobs are different. From a rooftop to a marine HVAC system, the Cube is easy to use and ideal for any residential and appliance sized recovery job. Capable of recovering both liquid and vapor refrigerant, the Cube is engineered to withstand the punishment of daily use even under extreme conditions. This season get the Cube and keep it cool all season long. Designed for recovery of medium and high-pressure refrigerants, including R-410A (Puron)
The Cube from Promax sets the new standard in refrigerant recovery. All jobs are different. From a rooftop to a marine HVAC system, the Cube is easy to use and ideal for any residential and appliance sized recovery job. Capable of recovering both liquid and vapor refrigerant, the Cube is engineered to withstand the punishment of daily use even under extreme conditions. This season get the Cube and keep it cool all season long. Designed for recovery of medium and high-pressure refrigerants, including R-410A (Puron)
SK-3001 Promax Interface Kit (Bracket, Coupler, Hardware)
SK-3003 Promax 115 Volt Axial Fan
SK-3004 Promax Motor Kit (motor, capacitor, hardware)
SK-3005 Promax High-side Manifold Kit
SK-3006 Promax Condenser
SK-3007 Promax Low Side Gauge 2.25" Bottom tap 1/8" mpt. Low Side Compound Refrigerant Manifold Gauge -30 To 250 Psi/Bar pressure readings. The ability to re-calibrate the gauge is a standard feature on all gauges.
SK-3008 Promax High Side Gauge 2.25" Bottom Tap 1/8" MPT. High Side Gauge 0 To 800 Psi/Bar pressure readings. The ability to re-calibrate the gauge is a standard feature on all gauges.
SK-3009 Promax Motor Clamp Kit (4 pieces)
Compressor Rebuild Kit (piston seals, valves, springs, o-rings)
RG6000 Inlet Fitting / Filter Screen Kit (includes inlet fitting, filter screen, o-ring)
RG6000 Filter Drier Kit (Includes Filter Drier, 6 Inch Hose)
SK-6007 PROMAX RG6000 / RG3000 Valve Rebuild Kit (Includes Inlet / Outlet Valves and Springs, O-rings). Includes parts for two cylinders.
