50lb. R-12 / Universal Gas Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve. 50 lb. capacity refrigerant tank for R-12, R-22, R-502 (universal) with 1/4" Flare fittings

CP1304 PROMAX Piston

CP1305 PROMAX Connecting Rod (CP1300)

Offset Motor Pump Coupler. Includes coupling, set screw, cap screws, dowel pin.

CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.

EL1309 PROMAX Momentary Switch

EL1412 PROMAX Capacitor

EL1420 PROMAX Sensor Cord

EL1500 PROMAX Relay DPDT 120VAC 30A

Axial Fan 115 volt, .43 amp 35 watt Rotary Fan, 6.375" Mounting Hole Centers. Two wire lead set for power connection 14" & 24"with 1/4" spade terminals.

1/2 Hp Ac Motor (110v) with starting relay (not available as a seperate item)

EL2800 PROMAX Pressure Sensor, Low (400 Psi)

FLCK-1 PROMAX Filter Conversion Kit (Replaces MF1275 Swivel). Allows for use of common Filter Drier. Includes: 100343 Filter Drier, 100345 Blue 4" Hose, Flare Adapter Fitting, 1/4 seal cap with retaining strap.

350psi Gauge (Blue), 1/8" MPT Bottom Tap Fitting, -30"HG To 120 PSI 350 PSI Max Compound Scale, PSI/BAR pressure readings, R-12 / R-22 PT Scales

500psi Gauge (Red), 1/8" MPT Bottom Tap Fitting, 0 To 500 PSI 500 PSI Max Pressure Scale, PSI/BAR pressure readings, R-410a PT Scale

800psi Gauge (Red), 1/8" MPT Bottom Tap Fitting, 0 To 800 PSI 800 PSI Max Pressure Scale, PSI/BAR pressure readings, R-410a PT Scale

GA1000 PROMAX Gauge Lens

500psi Gauge (Blue), 1/8" MPT Bottom Tap Fitting, -30"HG To 250 PSI 500 PSI Max Compound Scale, PSI/BAR pressure readings, R-410a PT Scale

This PROMAX piston seal replacement kit is to be used on the old style (round cylinder) and new style (rectangle Cylinder) compressors on RG54xx series, MiniMax Series and PROVAC Compressors.

PROMAX Valve Replacement Kit is to be used on the old style (round cylinder) and new style (rectangle Cylinder) compressors on RG5410 series, MiniMax Series and PROVAC Compressors. Kit includes all necessary parts to rebuild damaged valves and seals.

Shaft Seal Replacement Kit for CP1300 Compressor. Includes bearings, seals and o-rings and illustrated instructions.

NB4205 PROMAX Connecting Rod Set Screw

PROMAX WRIST PIN 1/4" DIA X 3/4" For Connecting Rod (CP1320)

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

NB9002 PROMAX E-Ring

SB2013 PROMAX 2-013 Neoprene "O" Ring

SB2026 PROMAX 2-026 Neoprene "O" Ring

SB2027 PROMAX 2-027 Neoprene "O" Ring

SB2038 PROMAX 2-038 Neoprene "O" Ring

SB5202 PROMAX Shaft Seal (Old Compressor)

Shaft Seal (New Compressor) Discontinued See KT3306 Bearing Kit Or KT3308 Seal Kit

SB6001 PROMAX Piston Seal

SH5022 PROMAX Fan Screen

WR2002 PROMAX Power Cord (110v)