100343 PROMAX Filter 1/4 Male Flare
1/4" Flare Filter for ProMax and MiniMax Units Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting.
CRXTOSP1 CPS 3 Pin Brad Harrison Tank Overfill Cable Shorting Plug
CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.
EL1817 PROMAX Axial Fan
Axial Fan 115 volt, .43 amp 35 watt Rotary Fan, 6.375" Mounting Hole Centers. Two wire lead set for power connection 14" & 24"with 1/4" spade terminals.
GA0800 PROMAX 800psi Gauge (Red)
800psi Gauge (Red), 1/8" MPT Bottom Tap Fitting, 0 To 800 PSI 800 PSI Max Pressure Scale, PSI/BAR pressure readings, R-410a PT Scale
GA1500 PROMAX 500psi Gauge (Blue)
500psi Gauge (Blue), 1/8" MPT Bottom Tap Fitting, -30"HG To 250 PSI 500 PSI Max Compound Scale, PSI/BAR pressure readings, R-410a PT Scale
KT-5002A PROMAX 80% Tank Overfill Protection Installation Adapter
For use with the PROVAX Refrigerant Recovery Machines that do not have internal wired jack for the KT-5002 overfill protection plug and cable. Some late model units do not have the 3 wire socket installed from the factory and this will be needed to complete the installation of your float cable kit.
KT3302 PROMAX Piston Seal Replacement Kit
This PROMAX piston seal replacement kit is to be used on the old style (round cylinder) and new style (rectangle Cylinder) compressors on RG54xx series, MiniMax Series and PROVAC Compressors.
KT3303 PROMAX Compressor Valves And Seal Kit
PROMAX Valve Replacement Kit is to be used on the old style (round cylinder) and new style (rectangle Cylinder) compressors on RG5410 series, MiniMax Series and PROVAC Compressors. Kit includes all necessary parts to rebuild damaged valves and seals.
KT3307 PROMAX Compressor Major Repair Kit (CP1320 Compressors)
This PROMAX piston compressor rebuild kit includes all parts needed to rebuild the new style (Rectangle Cylinder Only) compressors on RG54XX series, MiniMax Series and PROVAC Compressors. Kit includes all necessary parts to rebuild the piston "SLYD" Rings, Square piston seal and cylinder seat seals, as well as all necessary parts to rebuild damaged valves and seals and finally the bearings and shaft seal. This Kit does not include the actual valve plate, we suggest the purchase of the valve plate itself here. This kit will not repair round cylinder compressors.
