2206 O-ring Lube - 4 oz Spray cans: Lubricant prepares o-rings for installation.

O-ring: For the ATCO #8 Compression Fitting.

O-ring: For the ATCO #12 Compression Fitting.

O-ring # 6: For the #6 hose Ford expansion valve seal, Ford #6 springlock o-ring, Nissan #10 hose fitting / drier, VIR pickup tube / condenser line.

O-ring # 6: For the #6 hose Ford expansion valve seal, Ford #6 springlock o-ring, Nissan #10 hose fitting / drier, VIR pickup tube / condenser line.

O-ring # 8: For the #8 hose fitting GM V5 control valve (inside center), Ford #8 springlock fitting, Nissan #12 hose fitting and condenser discharge line, Toyota discharge line.

O-ring # 8: For the #8 hose fitting GM V5 control valve (inside center), Ford #8 springlock fitting, Nissan #12 hose fitting and condenser discharge line, Toyota discharge line.

O-ring # 10: For the #10 hose fitting Ford #10 springlock o-ring, Nissan evaporator suction line, Sanden TR70 suction port, Toyota suction line.

O-ring # 10: For the #10 hose fitting Ford #10 springlock o-ring, Nissan evaporator suction line, Sanden TR70 suction port, Toyota suction line.

O-ring # 12: For the #12 hose fitting Ford #12 springlock o-ring, GM V5 control valve (outside center), VIR expansion valve (lower), VIR expansion valve outlet, Vir compressor suction line connection.

O-ring # 12: For the #12 hose fitting Ford #12 springlock o-ring, GM V5 control valve (outside center), VIR expansion valve (lower), VIR expansion valve outlet, Vir compressor suction line connection.

Gasket: York / Tecumseh gasket.

Gasket: York / Tecumseh lathe cut flange seal.

Gasket: York / Tecumseh lathe cut seal.

Gasket: York / Tecumseh teflon rotolock seal.

O-ring # 6 Captured: For Ford combination valve evaporator manifold oil port, Ford expansion valve.

O-ring # 6 Captured: #6 GM "captured" fitting o-ring, Ford combination valve evaporator manifold oil port, Ford expansion valve.

O-ring # 8 Captured: The #8 GM "captured" fitting o-ring.

O-ring # 8 Captured: The #8 GM "captured" fitting o-ring.

O-ring # 10 Captured: The #10 GM "captured" fitting o-ring for Matsushita S1150X3 carbon shaft seal.

O-ring # 10 Captured: The #10 GM "captured" fitting o-ring for Matsushita S1150X3 carbon shaft seal.

O-ring # 12 Captured: The #12 GM "captured" fitting o-ring, Chrysler A590 / C171 carbon shaft seal, Diesel Kiki DKS13G carbon shaft seal, Ford FS6 carbon shaft seal, GM A6 / R4 carbon shaft seal, Nihon DKV14C carbon seal, Mitsubishi FX80 suction port.

O-ring # 12 Captured: The #12 GM "captured" fitting o-ring, Chrysler A590 / C171 carbon shaft seal, Diesel Kiki DKS13G carbon shaft seal, Ford FS6 carbon shaft seal, GM A6 / R4 carbon shaft seal, Nihon DKV14C carbon seal, Mitsubishi FX80 suction port.

# 8 Dual Fitting Gasket: This is the #8 dual fitting gasket.

# 10 Dual Fitting Gasket: This is the #10 dual fitting gasket.

# 12 Dual Fitting Gasket: This is the #12 dual fitting gasket.

O-ring Dual Fitting # 8: The #8 GM "dual" fitting o-ring (1/2").

O-ring Dual Fitting # 8: The #8 GM "dual" fitting o-ring (1/2").

O-ring Dual Fitting # 10: The #10 GM "dual" fitting o-ring (5/8").

O-ring Dual Fitting # 12: The #12 GM "dual" fitting o-ring for ATCO #10 compression fitting, Nissan suction / discharge (York reciprocating compressor).

O-ring Dual Fitting # 12: The #12 GM "dual" fitting o-ring for ATCO #10 compression fitting, Nissan suction / discharge (York reciprocating compressor).

O-ring: The Chrysler 6C17 lip seal, GM A6, DA6, HR6, Hr6HE, R4, V5 suction / discharge port, Nippondenso lip seal for 10PO8E, 10PA15, 10PA17, 10PA20, Nissan hose manifold to York rotary compressor.

O-ring: The Chrysler 6C17 lip seal, GM A6, DA6, HR6, Hr6HE, R4, V5 suction / discharge port, Nippondenso lip seal for 10PO8E, 10PA15, 10PA17, 10PA20, Nissan hose manifold to York rotary compressor.

O-ring: The Chrysler expansion valve o-ring.

O-ring: Oval o-ring for GM suction / discharge port.

4046 Sanden Compressor Suction O-Ring (package of 10)

O-ring: For Chrysler 6C17 switch port, GM superheat / pressure switch port.

O-ring: For Ford / GM orifice tube.

O-ring:O-ring: For GM capillary tube.

O-ring: For Ford FS6 suction / discharge port.

O-ring: For Ford FS6 suction / discharge port.

O-ring: Ford combination valve, STV manifold oil port (use with Chrysler gasket FJC part # 4132).

O-ring: Metric captive o-ring for Nissan, Calsonic, Honda.

O-ring: Toyota line / drier #5 hose fitting o-ring.

O-ring: Metric - Imports.

O-ring: GM & Asian Imports.

O-ring: Metric Chrysler.

O-ring: Metric Chrysler & Imports.

O-rIng: Metric - Imports.

O-ring: Metric - Asian Imports.

O-ring: Metric - Chrysler & Asian Imports.

O-ring: Metric - Asian Imports.

O-ring: GM & Asian Imports.

O-ring: This o-ring works with Metric - Asian Imports.

# 6 Spring: This is the #6 Ford coupling garter spring.

# 8 Spring: This is the #8 Ford coupling garter spring.

# 10 Spring: This is the #10 Ford coupling garter spring.

# 12 Spring: This is the #12 Ford coupling garter spring.

Chrysler Metal Gaskets: Includes FJC o-rings 4210 & 4211 and is a Dodge truck compressor gasket.

Chrysler Metal Gaskets: Includes FJC o-ring 4211 and is a Dodge truck compressor gasket.

Chrysler Metal Gaskets: Includes FJC o-ring 4210 and is a Dodge truck compressor gasket.

Chrysler Metal Gaskets: Includes FJC o-ring 4080 and is a Chrysler 3/8" drier / liquid line metal gasket.

Chrysler Metal Gaskets: Includes FJC o-ring 4213 and is a Chrysler 5/8" hose fitting metal gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler RV2 suction port gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler RV2 discharge port gasket.

Chrysler Metal Gaskets: Chrysler 3/8" drier / liquid line gasket (use with FJC o-ring # 4080).

Chrysler Metal Gaskets: Chrysler 5/8" hose fitting gasket (use with FJC o-ring # 4213).

Chrysler Metal Gaskets: This metal gasket is a Chrysler A590 / C171 suction / discharge port gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler 6C17 discharge port gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler 6C17 suction port gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler suction line gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler manifold to expansion valve gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler condenser manifold gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler TXV to evaporator (gold valve) gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler redeiver drier (0.437" 11.1 mm pilot bolt hole) gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler suction line flange gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler bottle block (0.377" 9.6 mm pilot bolt hole) gasket.

Chrysler Metal Gaskets: This metal gasket is a Chrysler TXV to evaporator (gold to black valve) gasket.

O-ring: Chrysler expansion valve.

O-ring: Chrysler A590 / C171 suction / discharge port, Ford FS6 suction / discharge port, Nippondenso 6P127A, 6P127B, 6E171A, 6P134, 10P13, 10P15 suction / discharge port.

O-ring: #8 Metric - Dual o-ring.

O-ring:  #10 Metric - dual o-ring.

O-ring: #12 Metric - dual o-ring.

O-ring: Metric 17 mm o-ring.

O-ring:  Volvo Metric o-ring.

O-ring: GM compressor shaft seal seat o-ring.

O-ring: Sanden shaft seal seat o-ring.

O-ring: GM & Imports o-ring.

O-ring:  Metric captive o-ring - Nissan, Calsonic, Honda.

O-ring: Metric hose and drier Mitsubishi FX 105V rear housing, Sanden TR70 oil drain bolt o-ring.

O-ring: Toyota liquid line / drier #5 hose fitting o-ring.

4187 FJC Inc. O-ring: Metric captive - Nissan, Calsonic o-ring. Also used on 6802 Low Side 1234YF Coupler.

O-ring: Ford 12 mm switchport - Metric (cycling pressure switch) o-ring.

O-ring: #6 ATCO compression fitting, Chrysler 6C17 pressure relief valve, Ford clutch cycling pressure switch, GM A6 / R4 pressure relief valve, GM V5 control valve (inside), Sanden SD7B10 oil plug / service port, Toyota pressure switch, York 206 / 210 oil plug o-ring.

O-ring: Metric 13.1 mm Imports o-ring.

O-ring: Metric for Ford #6 spring lock couplers.

O-ring: Metric for Ford #6 spring lock couplers.

O-ring: Metric for Ford #8 spring lock couplers.

O-ring: Metric for Ford #8 spring lock couplers.

O-ring: Metric for Ford #10 spring lock couplers.

O-ring: Metric for Ford #10 spring lock couplers.

O-ring: Metric 7.4mm  for Imports.

O-ring: Metric #8 GM captured o-ring.

O-ring: Metric #10 GM "captured" o-ring.

O-ring: Metric Ford #12 spring lock coupler o-ring.

O-ring: Metric Ford #12 spring lock coupler o-ring.

O-ring: Metric 9 mm Imports o-ring.

O-ring: Metric 10.7 mm Imports o-ring.

O-ring: Metric 16.9 mm Nippondenso compressor o-ring.

O-ring: Metric "captive" o-ring for Nissan, Calsonic, and Honda.

O-ring: Metric "captive" o-ring for Nippondenso condensor - Nissan, Calsonic, and Honda.

O-ring: Metric 14 mm o-ring for Mitsubishi compressor.

O-ring: Ford combination valve liquid bleed tube connection, Nissan #6 hose / expansion valve / capillary tube VIR liquid bleed tube.

O-ring: Sanden shaft seal seat - Diesel Kiki.

O-ring: GM oil tube and fill bolt, Diesel Kiki DKS16H oil drain plug, Nissan #8 hose fitting / drier.

O-ring: Metric 19.8 mm for Diesel Kiki.

O-ring: Used with FJC metal gasket part # 4128 (Dodge truck compressor gasket).

4211 FJC Inc. O-ring (10 Pack): Metric - Asian - compressor manifold (use with FJC Chrysler metal gasket part # 4129). Also used on 6801 HFO Highside Coupler.

O-ring: Used with FJC Chrysler metal gasket part # 4133.

O-ring: Metric - Asian - compressor manifold o-ring.

O-ring: Nissan compressor discharge flange o-ring.

O-ring: Metric - Asian - compressor manifold o-ring.

O-ring: Nissan condenser liquid line, VIR sightglass, Mitsubishi FX80 discharge port o-ring.

O-ring: Metric - Imports o-ring.

O-ring: This o-ring is a Mercedes o-ring with tabs.

O-ring: GM & Asian Imports o-ring.

O-ring: Metric - Asian Imports o-ring.

O-ring: Metric - GM & Asian Imports o-ring.

O-ring: Metric - Imports o-ring.

O-ring: Metric - Imports o-ring.

O-ring: Metric - Imports o-ring.

O-ring: Metric - Asian - Imports o-ring.

O-ring: #10 GM "captured" fitting o-ring, Matsushita S1150X3 carbon shaft seal.

O-ring: Diesel Kiki DKS15BH / DKS15CH discharge port, GM V5 control valve (outside), Behr Bosch carbon shaft seal, Nihon DKV14B carbon shaft seal, Sanden TR105 discharge port o-ring

O-ring: Hitachi SWP123 / SWP167 service valve, Nippondenso 6P148 suction / discharge port, Sanden TR90 suction port, Sanden pad mount suction o-ring.

O-ring: Ford hose fitting 1/2 #8 peanut o-ring.

O-ring: Diesel Kiki DKS15BH / DKS13G suction port, Ford combination valve evaporator manifold to STV manifold, Ford expansion valve, Mitsubishi FX105V metal shaft seal seat, Sanden TR105 suction port o-ring.

O-ring: Nippondenso TV10CA carbon seal o-ring.

O-ring: Diesel Kiki DKS16H oil fill plug Hitachi A5000 / MJS170 suction / discharge valve o-ring.O-ring: This o-ring is a Diesel Kiki DKS16H oil fill plug Hitachi A5000 / MJS170 suction / discharge valve o-ring.

O-ring:  Metric - Import o-ring.

O-ring: Diesel Kiki DK515CH pressure relief valve o-ring.

O-ring: Ford hose fitting - 3/4" #12 peanut o-ring.

O-ring: Matsushita S1150X3 sensor housing o-ring.

O-ring: Chrysler o-ring.

O-ring: Matsushita S1150X3 sensor / NL1300AA4 metal seat o-ring.

O-ring: Metric - Imports o-ring.

O-ring: Metric - Imports o-ring.

O-ring: Ford hose fitting 5/8" #10 peanut o-ring.

4252 Gasket (package of 2): This gasket is a Nippondenso 10P13C / 10P15C manifold gasket.

Gasket: This gasket is a Nippondenso 10PA15, Mercedes gasket.

Gasket: This gasket is a Nippondenso 10PA17 gasket.

Gasket: This gasket is a Matsushita NL1300 series, Panasonic gasket.

Gasket: This gasket is a Matsushita NL1301 series, Panasonic gasket.

Gasket: This gasket is a Matsushita, Panasonic SA series gasket.

O-ring Assortment: Total of 350 pieces comprised of 34 separate part numbers and all are constructed from green HNBR.

O-ring Assortment: Total of 180 pieces comprised of 18 separate part numbers which are the most popular sizes for all models, constructed of green HBNR.

O-ring Assortment: Total of 100 pieces comprised of four separate part numbers and all are constructed from green HNBR.

Chrysler O-ring Assortment - 1989 and Earlier: For Chrysler automobiles 1989 and earlier. It is a total of 187 pieces comprised of 20 separate part numbers and all are constructed from green HNBR.

Ford O-ring Assortment: Total of 200 pieces comprised of 20 separate part numbers containing o-rings, shims, and bushings, all o-rings are constructed from green HNBR.

Ford Spring Lock Assortment: Total of 60 pieces comprised of eight separate part numbers of which you will get, four sizes of o-rings, four sizes of  garter springs, green HNBR construction

Metric O-ring Assortment: Total of 120 pieces comprised of 12 part numbers containing the 12 most popular metric o-rings, all with HNBR construction.

Large Metric O-ring Assortment: Total of 180 pieces comprised of 18 separate part numbers, 18 of the most popular metric o-rings, with green HNBR construction.

Deluxe Metric / Import O-ring Assortment: Total of 350 pieces comprised of 34 separate part numbers covering 34 popular metric o-ring sizes with green HNBR construction.

Navistar Sealing Washer Kit: For Navistar - truck suction sealing washer and o-ring (includes FJC o-ring # 4181).

Service Item Assortment: Total of 612 pieces: o-rings, gaskets, sealing washers, caps and other service items, totaling 120 part numbers and has a convenient carrying / storage case.

O-ring Assortment- 8 compartment: Total of 200 pieces comprised of eight part numbers, that are the most popular sizes.

O-ring Assortment: Total of 24 pieces comprised of eight separate part numbers of which they are the most popular sizes.

O-ring for Couplers 6005 & 6009: High Side Coupler Repair Kit for FJC Part #s 6005 - High Side 90 degree R134a Quick Coupler, 6007 - High Side Straight R134a Quick Coupler and 6009 - High Side 1/4" R134a Service Couplers 90 degree R134a Quick Coupler.