SINGLE ACTING RAM 6-1/8" 10-TON

OTC 1520 Vehicle Lift System (2 Piece) -  Mobile, tandem system is air-operated to handle your class 7 and 8 tractor lifting needs. No need to waste time re-blocking and making additional lifts for the clearance you need for under-vehicle service.

TC 1521A 1,000 lb. Capacity Low-Lift Transmission Jack - Universal mounting head, with adjustable brackets, tilts front to back and side to side. Height range: 6-1/2" to 29-1/2". Safety chains hold the load securely, even while moving about the shop.

1522A OTC Tools & Equipment 2000 lbs. Stinger® Low Hydraulic Transmission Jack  is a rugged, stable unit is ideal for handling heavy transmissions. Includes adapter plate for Eaton®, Fuller®, and Road Ranger® transmissions. The low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work. Features include a pump handle that rotates 360º for operator convenience and safety overload prevents use beyond its rated capacity. Height range 6-1/2” to 35”.

OTC 1540 4-Ton Forklift Jack - 8,000 lb. capacity with a low starting height of 2-5/8". Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.

OTC 1543  Brake Drum Dolly - Removes, installs, and transports truck brake drums without physically having to lift them. Works on all 15" and 16-1/2" drums found on most class 7 and 8 tractor and trailer brake systems. 6" height adjustment aids installation. Heavy-gauge steel construction, 8" tires, and 36" handle.

OTC 1545 Motorcycle Lift features 17” long skids that will lift the largest, widest cruisers. The lowest clearance available, 3-1/2” at lowest level, with a wide lift range of 3-1/2” to 16-3/4”. The removable handle provides 360° access to load. Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety.

Innovative patent-pending design – clamps directly to pinch welds to prevent slippage during use. Features independent units that eliminate the need to adjust dolly width for different vehicle designs. Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. Independent units eliminate the need to adjust dolly width for different vehicle designs. Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. Universal design for use on all vehicle types without additional adapters. Each unit has a capacity of 1800 lbs. (3600 lbs., pair) with a low height of 9" and a high of 14". May be used with or without tires on the vehicle.

OTC 1580 1,500 lb Easy Roller™ - The Stinger No. 1580 Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6,000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms.

OTC 1585A Power Train Lift - Ideal for engine and transaxle service. Supports up to 1,250 lbs. Compact design and swivel casters for easy maneuverability. Comes with tilting plate. Height range is 29-1/2" to 68-1/2".

OTC 1590 10-Ton Air Lift provides 10 tons of lift at 200 PSI air pressure. Adjustable lifting saddles and an extra wide stance for extra stability. Lifting range is 13" to 52". Automatic mechanical safety catch engages in five height positions.

OTC 1591B 10-Ton Capacity Combination Air Lift and Support Stand This versatile air-powered lift includes an integrated pin-type stand, a wide lifting height range, an adjustable angle handle, and the peace of mind provided by the OTC Lifetime Warranty. Its wheels allow for easy mobility to get the 1591B to a heavy-duty or commercial vehicle to do the job.

OTC 1723 Engine Support Bar (2-Point) - Cutting edge, design self-centers load to prevent tipping on inclined surfaces. Smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces. Spinner handle enables lightning fast adjustment.

OTC 1725 Engine Support Bar (3-Point) features cutting edge, patent pending design self-centers load to prevent tipping on inclined surfaces. The smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces and the “Quick Connect” third-point bar makes setup a snap. A spinner handle enables lightning fast adjustment.

OTC 1726A 1000 lb Capacity Engine Stand - A timesaver for passenger car and light truck engine rebuilding or repair. Four adjustable attachment arms make engine mounting fast and easy. Engine can be rotated a full 360° with a turn of the handle; a locking pin secures the work in any of eight positions.

OTC 1734A Heavy-Duty Wheel Step - Tire-mounted wheel step provides quick, easy access to under-hood components. Fits heavy-duty vehicles (Class 7/8). 300 pound capacity. Installs in seconds; adjusts to fit 22-1/2" to 24" wheel sizes. Non-skid platform surface. OTC Lifetime Marathon Warranty®.

Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery. The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily maneuvered when loaded To ensure engine stability in all positions, this repair stand is equipped with a positive-crank handle locking mechanism. Twin-post design, featuring laterally adjustable, 3-position outboard support; provides an extremely stable work-holding unit. Locking rear wheels anchor stand in position.

Basic Tooling Set - This is the basic tooling set for servicing center and end beam bushings. It does not include the hydraulic pump or gauge. If you are already equipped with hydraulics, you can be replacing bushings right away! (Does not include tooling for hanger tube or end plug adapter removal.) 1740 tooling setup for end bushing installation. For 340 thru 450 Series Hendrickson Suspensions.

Hendrickson Service Set with Hydraulics (hydraulic pump 4062) - The method Hendrickson recommends for suspension service. You get the No. 1740 basic set, plus OTC’s No. 4062 two-stage electric/hydraulic pump with remote hand switch, a No. 9653 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.

Hendrickson Service Set with Hydraulics (hydraulic pump 4031)- The preferred method for servicing center and end beam bushings. You get the complete No. 1740 basic set, plus OTC’s No. 4031 two-stage electric/hydraulic pump with remote hand switch, a No. 9654 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.

End Bushing Adapter Puller Set - Set contains everything needed to remove end bushing adapter plugs in 380 thru 440 series suspensions. The plugs have to be removed prior to end bushing replacement. The set is complete in a handy plastic case. For use with 1740 series tooling sets (order separately).

End Bushing Adapter Puller Set

OTC 1750A 6000 lb. Revolver Diesel Engine Stand - 96 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position. Includes 205061 universal mounting plate for use with individual engine adapter plates.

Hendrickson Fabricated Bar Pin Adapter Set - Servicing bar pin end bushings used on Hendrickson equalizing beam tandem truck suspensions requires the use of special tooling.

OTC 1758 Fuel Tank Handler - Provides safe and efficient handling of fuel tanks; adjusts horizontally from 24" to 38" and vertically from 7" to 11" to service tanks up to 40 gallons. Universal adapter plate fits virtually all competitive transmission jacks in the market.

1763 OTC Hendrickson Center and End Bushing Service Set - This set is required for bushing service on 500 and 700 series heavy-duty suspensions. It is intended for use with a 100-ton capacity shop press. It allows replacement of center and end bushings. For 500 & 700 series suspensions. Use with a shop press.

Hendrickson PRIMAXX® Quick Alignment Socket - Used to adjust axle alignment on the Primaax air suspension systems. Works on Primaax models 230, 460, and 690 rear suspensions. Hendrickson has issued their approval of this tool.

Hendrickson Primaax® Quick Alignment Socket Wrench - Used to torque cross tube end cap bolts and longitudinal torque rod top pad bolts. Reduces maintenance time by eliminating the need to remove the tires to gain access to the end cap bolt. Hendrickson has issued their approval of this tool.

OTC 1778B 12-Ton Jack Stand (Sold Individually) - Spun steel base won't dig or sink into asphalt or sand. No. 1778B low stand support height range is 19" to 29-1/2".

OTC 1779B 12-Ton High Jack Stand - Spun steel base won't dig or sink into asphalt or sand. Stand support height range is 33-3/4" to 44-1/4".

OTC 1805 2,000 lb Capacity Load-Rotor® Sling - Use with a crane or hoist. Engine, transmission, or other component is tilted or leveled by turning sling's 5/8" hex drive end with a common speed handle and socket. Makes engine removal and installation a snap, even in close quarters. Has 56-1/2" long chain (1/4") and hook assembly with forged swiveling hook on each end. Pair of special mounting brackets included.

OTC 1806A 3,9000 lb Capacity Load-Rotor® Sling - Use with a crane or hoist. Engine, transmission, or other component is tilted or leveled by turning sling's 5/8" hex drive end with a common speed handle and socket. Makes engine removal and installation a snap, even in close quarters. Has 65-3/4" long chain (5/16") and hook assembly with forged swiveling hook on each end. Pair of special mounting brackets included.

OTC 1812 Load Leveler - Improved design over conventional spreader bars. Carriage on main support beam moved by turning lead screw; this permits fine adjustment of the tilt angle of component being lifted. Turn lead screw manually or with air-powered tools.

OTC 1813 6,000 lb Capacity Heavy-Duty Crane - Telescoping boom adjusts to three different lengths for three different weight capacities. Boom swivels for vertical and lateral positioning. Equipped with two speed hydraulic pump for rapid, easy lifting. Legs extend to straddle the biggest tires. Usable reach is almost 92". Steering dolly for easy maneuverability also serves as floor lock.

The OTC 1814 6,000 Ib. capacity retractable leg mobile floor crane equipped with No. 61399* electric / hydraulic (115V) pump with remote motor control. Three boom positions give you capacities of 4,000, 5,000, and 6,000 Ibs. - enough to lift the biggest engines and, in many cases, the transmission right along with the engine. A unique and useful feature is the boom swivel. Fully extended (4,000 Ib. cap.), you can swing the boom a full 3 ft. In the 6,000 Ib. cap. position you can achieve a swing of 26".

OTC 1819 2,200 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 16-7/8" lifting chain.

OTC 1820 4,400 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 18-3/8" lifting chain.

OTC 1821 10-Ton Air Operated Oil Filter Crusher - Crushes up to four automotive filters at one time, in just 20 seconds. 100% air operation eliminates electrical connections. The generous size crushing chamber (9" high) easily accommodates the largest automotive spin-on filters on the market.

OTC 1822 10,000 lb Capacity Load-Rotor® Load Leveler

1824A OTC Tools 20-Ton Hydraulic Shop Press - Economical press for bending, pressing, and straightening work. Works great for removal and installation of gears, bearings, and bushings. 20-ton bottle jack with 7-1/2" stroke.

OTC 1833 25-Ton Shop Press - Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more. Large 30" x 46" work area under ram makes positioning of even bulky work easy. Press bed is easily raised and lowered by a dependable lifting mechanism. Press complete with No. 4002 hydraulic hand pump; No. 9652 gauge; No. 24815 tee; No. 9767 hose (1/4" ID x 6'); hydraulic ram No. 51426 with 6-1/4" stroke; and 42733-WH2 pump mounting bracket.

OTC 1879 Accessory Set 12-Ton & 20-Ton Bottle Jack Presses – This accessory set is designed to be utilized in conjunction with OTC 12-ton and 20-ton bottle jack presses.

OTC 1880 17-1/2-Ton Press Accessory Set - Adapters and accessories attach to ram's forcing screw or are used on press bed to support work.

OTC 1881 Accessory Set for 25-Ton Capacity Presses - Accessories attach to ram's forcing screw or support work on the press bed.

OTC 1890 Pair Of V-Blocks For 10-Ton Presses

OTC 2002 2,000 lb Capacity Folding Floor Crane - This 2,000 lb floor crane folds for compact storage, has a reach of 24" to 36" with 3-1/2" front wheels and 5-7/8" rear casters.

OTC 2004 4,000 lb Capacity Folding Floor Crane - This 4,000 lb floor crane folds for compact storage, has a reach of 25" to 46" with 3-1/2" front wheels and 5-7/8" rear casters.

Adapter Nut Assembly

Adapter Nut

Interchange Adapter

Threaded Adapter

OTC 2036PB Protective Blanket (20" x 36") - Wrap around pulling, pressing, and other high-force jobs to protect you and your employees from work-related injuries as much as possible. Made of high tensile, tear resistant ballistic nylon – similar to military flak jackets – that, when tested, withstood the shattering of a neck-down grade 8 bolt without any visible damage.

Lifting Sling 2000Lb Capacity

Lifting Sling 4000Lb Capacity

OTC 205058 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. For Detroit Diesel engines: 53 series in-line 6-cylinder, 6V & 8V; 71 series in-line 6-cylinder, 6V, 8V, & 12V; 92 series 6V & 8V; 8.2 liter V-8. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 205059 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Cummins engines: All NH, NTC, NTE, N14 855 series in-line 6 cyl.; 378 series V6; 504, 555, and 903 series V8; KT 1150 series in-line 6 cyl., L10. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 205060 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Caterpillar engines: Nos. 1673, 1674, 1693, 3306, and 3406 in-line 6 cyl.; Nos. 1100, 3208, 3408 V8 and 3406E. Mounting plate includes all the necessary hardware and an engine application chart.

Universal Adapter - Required for mounting engine adapter plates to the 1750A and 1750 Engine Stands.

OTC 205101 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: All 672, 673, 675, & 711 series in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.

Puller Attachment

OTC 206386 International Harvester / Ford Engine Adapter Mounting Plate - International Harvester / Ford Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For International Harvester engines: DT-466, DT-360, DT408, and 530 in-line 6 cylinder; DV-550, MV-404, MV-446, V304, V345, V392, 4-152, 4-196, 4-194; 9.0 liter and T444E V8. Ford 6.9L, and 7.3L DIT. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 206629 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: V8 1000, E6, & E7 in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.

Spacer Ring

OTC 208160 Detroit Allison Transmission Mounting Plate - Detroit Allison Transmission Mounting Plates for 1750A and 1750 diesel engine stands. Allison transmission mounting plate for transmission Nos. AT500, MT600, MT 6-speed, VH, VS, and V730. Mounting plate includes all the necessary hardware and an engine application chart.

100 Ton Pushing Adapter

Reservoir Conversion Kit

Breaker

V-Nose Adapter

OTC 21669 Threaded Insert - This threaded insert has a thread pitch of 1"-8. Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

OTC 21714 Plain-Hole Insert - This plain-hole insert has a hole diameter of 1-1/16" and is intended for use with the OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

OTC 217687 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 217687 – For Caterpillar 3114, 3116, and 3176 in-line 6 cyl. and C12 engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218098 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218098 – For Cummins "B" series 5.9L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218099 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218099 – For Cummins "C" series 8.3L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218174 Flywheel Handling Attachment - Flywheel handling attachment for use on OTC 5015 only.

OTC 218504 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. No. 218504 – For Detroit series 60 in-line 6-cylinder engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 21872 Plain-Hole Insert - This plain-hole insert has a hold diameter of 1-5/16". Intended for use with OTC 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 21873 Threaded Insert - This threaded insert has a thread pitch of 1-1/4"-7. Intended for use with OTC 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 220972 Lifting Extension - Now included with No. 5012A, but can be purchased alone for use on older 5012As, is 3" long and has a 1" diameter.

Accessory Kit For 5079

This 4-arm extra-long adapter kit is used with the OTC 1728 high-lift transmission jack to extend the jack's existing arms. The extra-long arms mount on the jack's short arms to hold larger standard transmissions with irregularly shaped oil pans. The four arms are adjustable to help stabilize transmissions with rounded bottoms.

NOTE: Part #223196 includes 4 extra-long adapter arms ONLY. 1728 high-lift transmission jack sold separately.

OTC 24813 Jack Screw - This jack screw has a thread pitch of 1"-8 and is 7" in length. Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

OTC 24814 Speed Crank - Compatible with the OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

Tee Connection

Lifting Plate

Remote Control Hand Switch

Ram Flat Base

Threaded Connector

Hose Coupler

OTC 25931 Jack Screw - This jack screw has a thread pitch of 1-1/4"-7 and is 9" in length. Intended for use with OTC 25 and 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 27198 Speed Crank - Compatible with the OTC 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 28228 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-1/2". Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

OTC 28229 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-3/4". Intended for use with OTC 25 and 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 28230 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-5/8"-5-1/2 and a diameter of 2-1/4". Intended for use with OTC 50 and 55-Ton Hydraulic Presses, Pullers and Push-Pullers.

Installing Adapter

Adapter Installing

Adapter Removing & Installing

Protective Puller Blanket

Tapped Insert

Tapped Insert

OTC 29595 Speed Crank - Compatible with the OTC 50-Ton Hydraulic Pullers and Push-Pullers.

Spacer Ring

Receiving Adapter

Receiving Adapter

Pulling Screw

Removing/Inst. Adapter

Removing/Inst. Adapter

Installing Adapter

Removing Adapter

Speed Nut

Adapter Removing

Installing Adapter

Removing Adapter

Spacer Ring

OTC 302482 Speed Nut - This speed nut has a thread pitch of 1"-8 and is intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

4 TON RAM With HALF COUPLER

OTC 4085 1-Ton Capacity Hydraulic Spreader - This hydraulic spreader is rated at a full 1-ton capacity at 10,000 PSI and that’s enough for a wide variety of jobs. Working in tight spots is no problem—it needs only a 9/16" clearance to engage the jaws. With a big 4" spread, it’s ready for a variety of applications.

OTC 4324 Engine Support Bar - This engine support bar has features like; rubber padded support legs ensure stability during use, 1,100 pound capacity, tubular steel construction for long life, adjustable width and two hook assemblies. Includes two 36" chain assemblies.

OTC 5018A Truck Clutch & Flywheel Handler - Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs. Swivel casters provide easy maneuverability. Includes a 2" splined shaft with a 1-1/4" pilot to aid in alignment. 360° swivel head. Minimum height of 15" allows access below side faring. When raised, centerline of clutch will be 38-1/4" off floor. Floor space is 32-3/8" long by 24-1/2" at widest point.

OTC 5078 Air-Assisted 2,000 lb Capacity High-Lift Transmission Jack for Trucks & Buses - Low height of 41-1/2" allows transmission to be rolled out from under vehicle's frame. Foot-operated air pump enables the operator to effortlessly raise the transmission into place. Rugged heavy wall tubing and oversized base for stability. A dedicated adapter for Allison 500 and 600 series automatic transmission is included.

OTC 540232 Mack Transmission Mounting Brackets - Accessory for the OTC 5019A Low-Lift Transmission Jack.

OTC 7100 Lifting Brackets (4,000 lbs. Capacity) (Pair)

OTC 9101B Hydraulic Spreader -  Ideal for removing dents and creases, performing straightening jobs, or for use as a clamp. Makes working in tight spots easy.

OTC 9102 Hydraulic Spreader -  Ideal for removing dents and creases, performing straightening jobs, or for use as a clamp. Makes working in tight spots easy.

OTC 9104A 4-ton Hydraulic Ram for Collision Repair Sets -  This premium quality ram is designed for long, trouble-free service.

9106B Single-Speed Hydraulic Hand Pump -  This single-speed pump is ideal for single-acting rams. Developing up to 10,000 psi operating pressure, the pump operates horizontally or vertically in the “down” position. Finger-tip control provides instant release or pumping action. Has a built-in safety overload valve. Ideal for use with OTC Stinger single-acting rams, or similar competitive rams.

OTC 9107B Single-Speed Hydraulic Hand Pump -  This single-speed pump is ideal for single-acting rams. Developing up to 10,000 psi operating pressure, the pump operates horizontally or vertically in the “down” position. Finger-tip control provides instant release or pumping action. Has a built-in safety overload valve. Ideal for use with OTC Stinger single-acting rams, or similar competitive rams.

OTC 9110B 10-ton Hydraulic Ram for Collision Repair Sets -  This premium quality ram is designed for long, trouble-free service.

The HDJ10 OTC 10-ton service jack has built-in safety overload to prevent over utilization beyond the jack's rated capacity. This 10-ton floor jack also features a convenient foot pedal to speed the lifting operation. Handle lock and release control are located on top of the handle. Spring-loaded 43-1/4" handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Ideal size for vocational vehicles, bucket trucks, school buses and larger vehicles. Rugged steel frame and extra-large wheels for durability and strength.

The OTC HDJ10P is a 10-ton capacity service jack that brings the versatility of air-assist operation to your shop’s lifting tasks. HDJ10P has rugged steel frame members. Spring-loaded handle may be locked in three positions, from horizontal to vertical. The HDJ10P from OTC is the ideal size for heavy duty lifting jobs such as vocational vehicles, highway maintenance, delivery and service fleets, bucket trucks, school buses and community transit vehicles. OTC's HDJ10P is easy to maneuver. A foot pedal quickly positions the saddle to the lift point. Connects to shop air supply for effortless lifting of heavy loads. Cycle tested design for a long life of professional duty. Ideal size for vocational vehicles, bucket trucks, school buses and larger vehicles.

The HDJ5 OTC 5-ton service jack. An extremely safe and durable long chassis 5-ton floor jack. Built-in safety overload prevents using the jack beyond its rated capacity. A convenient foot pedal speeds the lifting operation. Handle lock and release controls are located on top of the 40" spring-loaded handle. Handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Ideal size for lifting step vans, bucket trucks and smaller work vehicles.

TJH10 OTC Tools 1,000-lb Capacity High-Lift Transmission Jack. A high-lift transmission jack with universal saddle and adjustable corner brackets and safety chains for optimum positioning of the load. The head tilts front to back and side to side to make removal and installation of transmission and driveline components easier. Big, easy-to-grip knobs make mounting head adjustments simple, and the included safety chains securely hold components during removal, transport and installation. Ideal size and capacity for the removal and installation of automobile transmissions. Meets all ASME PASE-2019 safety standards.