TPI 100 Easy One Button Operation Digital Multimeter with Protective Boot - The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically. This multimeter features very ease one button operation and displays 0 to 600 volts AD/DC, 10M ohm impedance, automatic power off and a 3 year warranty.

105-52-000 TPI BNC Termination 50 Ohm ±1% Dc - 2 Ghz 1 Watt

1130 Kastar Retractable Test Lead - 30 ft. Retractable test lead pull out and stay at desired length. Used for testing electrical circuits. Rewinds test leads into its own protective case when not in use. Has insulated alligator clip on each conductor. 18 gauge copper wire. 30 foot lead.

11436 Titan Digital Circuit Tester. LCD display provides a ‘no guess’ voltage value of the circuit. Used to detect voltage, power, ground and circuit integrity. For use on 6-48 Volt DC systems. Computer safe 10mA circuit draw for confident testing.

Compact true-rms meter for field service technicians. The Fluke 117 is the solution for a wide variety of electrical and electronic testing applications. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. Designed by electricians. Engineered by Fluke.

Associated Equipment's ATEC Digital Voltmeter, No. 12-1011, determines State of Charge and checks voltage. This Made in America tool makes it easy to check state of charge with the use of a table right on the tool that compares voltage reading and corresponding state of charge for both Lead Acid and AGM Batteries. Includes a digital readout of battery voltage.

TPI 120 Compact Digital Multimeter (DMM) with Boot, Test Leads and Manual - When using the Model 120, press the DATA-H button at any time on any function or range to freeze the reading on the LCD display. This function is very useful when measuring in locations where the display is difficult to read.

120082 TPI Individual BNC Attenuator 3 Db 1.0 Watt

120083 TPI Individual BNC Attenuator 6 Db 1.0 Watt

120084 TPI Individual BNC Attenuator 10 Db 0.5 Watt

120085 TPI Individual BNC Attenuator 20 Db 0.5 Watt

120086 TPI BNC Attenuator Kit (Includes 120082 120083 120084 120085)

120249 TPI Pvc Alligator Clip Black

120250 TPI Pvc Alligator Clip Red

121000B TPI Probe Black

121000R TPI Probe Red

Compact Digital DMM Acmv W/Boot Test Leads And Manual. Safety: Meets CE and IEC 1010 requirements. UL Listed. Large LCD: Easy to read at all angles and the majority of lighting levels. Data Hold: Freeze readings on the display. Rubber Boot: Added protection when the instrument is dropped. (122NB does not include boot.) Versatile: Use accessories like a carbon monoxide attachment to expand the capabilities of the 122.

123501B-10FT TPI 10 Ft. Black Lead

123501B-5FT TPI 5 Ft. Black Lead

123501R-10FT TPI 10 Ft. Red Lead

123501R-5FT TPI 5 Ft. Red Lead

123502B TPI Sprung Hook Black

123502R TPI Sprung Hook Red

124001B TPI Spade Terminal Black

124001R TPI Spade Terminal Red

TPI 126 Compact Autoranging DMM W/Boot Test Leads And Manual - The 126 is a hand-held autoranging DMM. The 126 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

126000B TPI Alligator Clip Black

126000R TPI Alligator Clip Red

126005B TPI Large Alligator Clip Black

126005R TPI Large Alligator Clip Red

126009B TPI LEC1010 Alligator Clip Black

126009R TPI LEC1010 Alligator Clip Red

TPI 133 Manual Ranging DMM W/Boot Test Leads Battery And Manual - The 133 is a hand-held autoranging DMM. It features extra large numerals on the LCD, and Data Hold for all functions and ranges. The 133 is an affordable choice offering measurements in all of the basic electrical functions.

TPI 135 Manual Ranging DMM With Capacitance 40UA Range with Boot, Test Leads and Manual - Full size DMM with capacitance; 1,000 DC volts and 750 AC volts; 0.5% DCV basic accuracy. The 135 is a hand-held autoranging DMM. It features extra large numerals on the LCD, and Data Hold for all functions and ranges. The 135 is an affordable choice offering measurements in all of the basic electrical functions.

TPI 153 Autoranging DMM W/Boot Test Leads Battery And Manual - Full size, autoranging, easy to read, 0.3% DCV basic accuracy DMM; 1,000 DC volts and 750 AC volts. The 153 is a hand-held autoranging DMM. The 153 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

TPI 163 Autoranging DMM W/Bar Graph, Boot, Test Leads and Manual - Full size DMM with analog bar graph; 1,000 DC volts and 750 AC volts; 0.5% DCV basic accuracy. The 163 is a hand-held autoranging DMM. The 163 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

TPI 183A 4,000 Count True RMS DMM W/ Temperature Capacitance Duty Cycle And Low Pass Filter W/ A106 A085 And GK13M - The 183A is a hand-held autoranging DMM. The 183A measures ACV, DCV, ACA, DCA, Resistance, Frequency, Duty Cycle, Diodes, Capacitance, Temperature and Continuity. The meter is also easy to use and built to last.

TPI 192 True RMS 50,000 Count DMM with Inductance - The Triple Display 192 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

TPI 194 True RMS 50,000 Count DMM W/ Cat IV 1000V Rating with A106 And GK13M - The Triple Display 194 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

TPI 196 Process DMM with 0 to 24mA output - The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

1AC-A1-II Fluke Volt Alert Non-Contact Voltage Tester. The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. How it Works:  The 1AC-A1-II Fluke Volt Alert senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

TPI 1P20B Oscilloscope Probe 20 MHz X 1 1.2M Cable Length - This is a non-switchable passive oscilloscope probe. Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

TPI 1P20B2 Oscilloscope Probe 20 MHz X 1 2M Cable Length - This is a non-switchable passive oscilloscope probe. Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

TPI 1P20B3 Oscilloscope Probe 20 MHz X 1 3M Cable Length - This is a non-switchable passive oscilloscope probe. Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

TPI 265 Clamp-On Tester with Frequency and Capacitance - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications. Perfect for tight, narrow, spaces. The new TPI 265 with slim jaw and body is ideal for cramped work areas and crowded electrical panels. The 265 is a hand-held, autoranging clamp-on DMM. Extra large numerals, capacitance, frequency and data hold are just a few of the features of the 265. An affordable choice, the 265 offers measurements in all basic electrical functions.

TPI 270 Clamp-On Tester with Digital Multimeter - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications.Perfect for tight, narrow, spaces. The new TPI 270 with slim jaw and body is ideal for cramped work areas and crowded electrical panels.The slim design 270 is a hand-held, autoranging clamp-on DMM. Extra large numerals, min/max, capacitance, DC microamps and duty cycle are just a few of the features of the 270. An affordable choice, the 270 offers measurements in all basic electrical functions with additional advanced features like non-contact voltage.

TPI 275 Clamp-On Tester with True RMS Digital Multimeter and 11,000 Count Display - The slim design 275 is a hand-held, autoranging clamp-on DMM. Extra large numerals, min/max, capacitance, DC microamps and duty cycle are just a few of the features of the 275. An affordable choice, the 275 offers measurements in all basic electrical functions with additional advanced features like non-contact voltage.

Advanced. Precise. Accurate. Logging DMM with Trend Capture. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its unique logging and graphing capabilities.

TPI 291 hand-held manual ranging clamp-on DMM - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications. Digital Clamp-On Meter Amp Plus. The 291 is a hand-held manual ranging clamp-on DMM, an affordable choice offering measurements in all basic electrical functions.

TPI 293 clamp-on plus DMM with True RMS capabilities - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications. Digital Clamp-On Meter Amp Plus. The 293 is a clamp-on plus DMM with True RMS capabilities. The 293 offers measurements in all  basic electrical functions plus:

TPI 296 clamp-on plus DMM with True RMS and Harmonics capabilities - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications. Digital Clamp-On Meter Amp Plus. The 296 is a clamp-on plus DMM with True RMS and Harmonics capabilities. The 296 offers measurements in all basic electrical functions, plus:

Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw on your DMM. This handy tool adapts your DMM to plug directly into mini fuse socket for direct testing of live circuits while maintaining circuit protection. Original fuse is replaced in-line during testing, thereby maintaining circuit protection. Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse.

Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw. This handy tool plugs directly into mini fuse socket for direct testing of live circuits while maintaining circuit protection. Original fuse is replaced in-line during testing, thereby maintaining circuit protection. Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. Ideal for electrical troubleshooting at the fuse box.

Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw on your DMM. This handy tool adapts your DMM to plug directly into mini fuse socket for direct testing of live circuits while maintaining circuit protection. Original fuse is replaced in-line during testing, thereby maintaining circuit protection. Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. Ideal for electrical troubleshooting at the fuse box.

Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw. This handy tool plugs directly into mini fuse socket for direct testing of live circuits while maintaining circuit protection. Original fuse is replaced in-line during testing, thereby maintaining circuit protection. Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. Ideal for electrical troubleshooting at the fuse box. Can be used to measure all circuit draws up to 20 Amps Can even be used to test parasitic drains (battery drains). Measuring Capability: 0 – 20 Amps / 48V DC or AC. Resolution .01A (10 milliamps), accuracy + 2%.

IAC Lite - For checking the electronic control module signal that provides direction to the idle air control motor on General Motors vehicles with throttle body or port fuel injection systems. Signal test light for 1982 and newer GM TBI and PFI fuel injection systems with square 4-pin connector.

IAC Lite - For checking the electronic control module signal that provides direction to the idle air control motor on General Motors vehicles with throttle body or port fuel injection systems. Signal test light for 1987 and newer GM Model 700 TBI and PFI fuel injection systems with a flat 4-pin connector.

OTC 3054E Noid Lite / IAC Test Kit - Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles. Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine. A flashing light indicates normal pulsing voltage.

Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw. This handy tool plugs directly into mini fuse socket for direct testing of live circuits while maintaining circuit protection. Original fuse is replaced in-line during testing, thereby maintaining circuit protection. Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. Ideal for electrical troubleshooting at the fuse box. Can be used to measure all circuit draws up to 30 Amps Can even be used to test parasitic drains (battery drains). Measuring Capability: 0 – 30 Amps / 48V DC or AC. Resolution .01A (10 milliamps), accuracy + 2%.

Now a Fuse Buddy tester for Maxi fuse circuits! Fuse Buddy Maxi can test up to 80 AMPS. There are numerous Heavy Duty & Automotive applications. With supplied adapters, the 315 can also work with MINI and ATC circuits. Easy access to measure amperage draws in MAXI, MINI & ATC circuits. Can measure up to 80 Amps DC on MAXI fuse circuits.

Great new product! The # is the ideal tool for easy and accurate measurement of RPM in almost any environment.

OTC 3505A 100 Series Autoranging Automotive Multimeter - The 3505A is the latest version of the Classic 100 Series Autoranging Automotive Multimeter with many new and useful troubleshooting features. It still features all of the same basic Multimeter functions plus some new and powerful Automotive specific test functions.

OTC 3587 Terminal Test Kit - For the professional electronic diagnostic technician. Set includes an assortment of 28 flexible, color-coded connectors that adapt to Packard WeatherPack, Metri-Pack, and Micro-Pack terminals.

OTC 3630 Battery Powered Circuit Tester - Designed to test any type of non-live electrical circuit. Track down broken wires, bad grounds and blown fuses quickly.

OTC 3631 Heavy-Duty Logic Probe Circuit Tester - Multi-functional design allows testing range of 3–26 volts. Bright red and green LEDs interpret voltage signals such as ground, power, and frequency. Tests fuel injectors, solenoids, presence of serial data, and tach reference signals.

OTC 3633 Mini-coil Cord Circuit Tester - Small handle with needlepoint stainless steel probe allows easy back probing and piercing. Special threaded probe comes with screw on alligator clip for additional versatility. Useful in testing electrical circuits and locating shorts, grounds, and open circuits.

10-Pack Replacement Bulbs For 3633 - 3639

OTC 3634 Heavy-Duty Straight Cord Circuit Tester - Designed for testing electrical circuits and locating shorts, grounds, and open circuits. Features and Benefits.

OTC 3636 Heavy-Duty, Coil Cord Circuit Tester - Designed for testing electrical circuits and locating shorts, grounds, and open circuits.

OTC 3642 12V - 24V Truck Circuit Tester - Works on 12–24 volt systems. Features 7" stainless steel probe. 24' coil cord. Extra large clamp.

10-Pack Replacement Bulbs For 3630

12-Pack Display Circuit Tester Assortment

Test Leads 2 Ch Scope Red & Yellow

2 Piece Banana Lead Extension

3 Piece R/Y/B 5-Way Alligator Clips

3 Piece R/Y/B Test Probes

3 Piece R/Y/B Back Probes

Ignition Probe 2 Ch Scope

Inductive Pickup 2 Ch Scope

Ni-Mh Rechargeable Battery 2 Ch Scope

Ac Power Adapter 2 Ch Scope

Two Channel Scope User Manual

OTC 3890 Brake Fluid Safety Meter - This handy tester actually tests brake fluid and with features like: utilizing vehicle power and on-screen prompts. It has the ability to display the minimum boiling point and recommended levels for DOT 3, DOT 4 and DOT 5.1 types of brake fluids. All of this without having to keep re-ordering those consumable test strips. You will be able to test every vehicle that is brought in.

OTC 3902 Twin 5-Foot Jumper Leads - These high visibility black and red leads stretch to over 5 ft. in length. Constructed from high quality polyurethane, these high visibility coil cord test leads have superior memory retention and resistance to grease and oil, making them a perfect compliment to any technician's arsenal of test equipment. Test leads come with a variety of interchangeable tips suited for just the right application.

OTC 3903 24-Foot Jumper Lead - Constructed from high quality polyurethane, these high visibility coil cord test leads have superior memory retention and resistance to grease and oil, making them a perfect compliment to any technician's arsenal of test equipment. Test leads come with a variety of interchangeable tips suited for just the right application. From headlight to taillight, this extra long test lead stretches to over 24 feet in length.

Constructed from high quality polyurethane, these high visibility coil cord test leads have superior memory retention and resistance to grease and oil, making them a perfect compliment to any technician's arsenal of test equipment. Test leads come with a variety of interchangeable tips suited for just the right application.

OTC 3905 Twin 5-Foot Multimeter/Piercing Jumper Lead Set - Constructed from high quality polyurethane, these high visibility coil cord test leads have superior memory retention and resistance to grease and oil, making them a perfect compliment to any technician's arsenal of test equipment. Pierce small gauge wires with this complete jumper lead set.

OTC 3906 Twin 5-Foot Piercing Test Lead Set - Constructed from high quality polyurethane, thes high visibility coil cord test leads have superior memory retention and resistance to grease and oil, making it a perfect compliment to any technician's arsenal of test equipment.

OTC 3908 Amp Clamp / Multimeter - OTC AMP Clamp/Multimeter was designed to allow accurate current measurements using clamp jaws. The clamp meter is well suited for testing starting/ charging circuits, and provides easy access to current, voltage and other key automotive measurements, all in one easy to use tool.

OTC 3940 550 Series Digital Multimeter - The 550 Series DIGITAL MULTIMETER features powerful automotive test functions such as; Frequency, Duty Cycle, Diode & Continuity Tests, plus all the standard meter features you expect in a professional grade Multimeter.

3940-HD OTC Multimeter HD Kit For Trucks - Professional grade multimeter kit for heavy duty truck repair. HD KIT TECH’S NEED. A professional grade DMM and the most common accessories for trucks Have what you need for electrical trouble-shooting right out of the box. The OTC 3940 550 Series Digital Multimeter - The 550 Series DIGITAL MULTIMETER features powerful automotive test functions such as; Frequency, Duty Cycle, Diode & Continuity Tests, plus all the standard meter features you expect in a professional grade Multimeter.

OTC 3980 750 Series Professional Automotive Multimeter - The 750 Series AUTOMOTIVE MULTIMETER includes powerful automotive test functions such as; Frequency, Duty Cycle, Diode & Continuity Tests, PLUS Automotive specific tests; True RMS, RPM, Dwell, Pulse Width, Temperature, Backlight, RS232, and Min/Max. It is CATIII so it is compatible Hybrid vehicle systems.

REPLACEMENT FUSE FOR 3990 MULTIMETER

TPI 40 AC Volt Tester (Low Voltage) - The TPI 40 is essential to anyone determining the presence or absence of electrical voltage between 24-90 VAC. Use the TPI 40 for checking lawn irrigation equipment, thermostat controls, vending machine changers, and other low voltage equipment.

420184-025 Low Voltage Circuit Tester (25 Pack) - This unit works on 6, 12 and 24 volt circuits. It has a chrome plated brass body with a screw on cap to protect the insulation probe.

420184-2001 Low Voltage Circuit Tester (Each) - This unit works on 6, 12 and 24 volt circuits. It has a chrome plated brass body with a screw on cap to protect the insulation probe.

TPI 440 Oscilloscope 1 MHz True RMS DMM Logic And Component Test Leads And Charger - The TPI 440 is a hand-held oscilloscope plus autoranging DMM. The instruments large, backlit LCD display shows a reading and waveform simultaneously. In addition to the standard functions of ACV, DCV, ACA, DCA, Ω, Diode Test and Continuity Buzzer; the 440 measures Frequency (Hz),Capacitance, Logic and Component test functions. The 440 also has RS232 output and software for interfacing with a PC is offered as an optional accessory.

TPI 45 AC Volt Tester - The TPI 45 is essential to anyone determining the presence or absence of electrical voltage between 50-1,000 AC. The TPI 45 allows the user to detect a defective ground before an individual is exposed to injury. Simply touch the plastic tip to a connection point or move it along a wire. If AC voltage is present, the tip will glow red. Defective grounds can cause either voltage or an electrical field to be present on a metal casing. Both of these conditions can be detected by using the TPI 45.

TPI 460 Handheld Oscilloscope. Dual Channel, 20MHz Oscilloscope with True RMS DMM - The 460 hand held oscilloscope features a 3” x 3” cold cathode fluorescent display providing test data in a clear easy to see format. The cursor readout function allows the width and amplitude of a signal to be measured precisely instead of trying to figure it out manually. Technicians appreciate the bright backlight of the 3" x 3" cold cathode flourescent display and rugged construction inside and out.

TPI 50 AC Volt Tester - The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage.

TPI 505 Combination Digital Photo / Contact Tachometer - Use the 505 photo / contact tachometer to determine RPM and surface speed. The 505 is a combination photo and contact tachometer that also measures surface speeds of belts and wheels.

The TPI 510 is an easy to use, solar irradiance meter for measurement of not only solar radiation, but all measurable light sources including all visible light. The TPI Solar Meter is state of the art and easy to use. It is designed to measure solar power in W/m2 or BTU (ft2*h). Use to find the optimal angle of inclination for installing solar panels. Measure light intensity through windows. Determine the effectiveness of solar film / window tint. Measure solar radiation (irradiance). Displays results in W/m2 or BTU. 0 to 1999 W/m2 (0 to 634 BTU) range. Min / Max and Data hold functions.

The Mastercool Airflow + Psychrometer is a battery operated, micro processor based meter that reads humidity, air temp., dew point, wet bulb, air velocity, air volume and BTU. The sensor is built into the remote fan and is protected by a rotating cap. With auto-off with disabling, fast and accurate reading, tripod mountable, microprocessor circuitry, metric and inch units selection, large backlit LCD display, professional remote vane, all in a handheld size unit. Operates on 4 AAA batteries and has a low battery indicator.

The Mastercool 52240 Professional HVAC/R Clamp Meter has multiple functions: frequency count, diode check and alarm, as well as features like; peak data hold, unit and sign display, current, voltage, frequency and ohms not to mention auto power off.

The Mastercool 52331 Thermocouple Probe - 3 ft (1 Meter) is a wire probe with the K type connector.

The Mastercool 52332 Thermocouple Probe - 10 ft (3 Meter) is a wire probe with the K type connector.

The Mastercool 52336 Clamp-On Thermocouple has a K type connector and is extendible up to 3 feet. For use with the Mastercool 99XXX HVAC Digital Manifold series.

The Mastercool 52336 Clamp-On Thermocouple has a K type connector and is extendible up to 10 feet. For use with the Mastercool 99XXX HVAC Digital Manifold series.

The 550 is used to check high voltage circuits on Hybrid cards for leaks to ground. The 550 can supply 250V, 500V and 1000V test voltages for doing complete insulation testing. The 550 is auto-ranging and can measure up to 2000 MegaOhm with a resolution of 1 K Ohm.

TPI 575C1 Digital Air Velocity Meter - The TPI 575 Vane/Hotwire Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

TPI 58-012-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 12 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-024-1A Assembled BNC to BNC Coaxial Cable Assembly (RG58/U 24 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-024-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 24 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-036-1A Assembled BNC to BNC Coaxial Cable Assembly (RG58/U 36 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-036-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 36 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-048-1A Assembled BNC to BNC Coaxial Cable Assembly (RG58/U 48 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-048-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 48 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-060-1A Assembled BNC to BNC Coaxial Cable Assembly (RG58/U 60 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-060-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 60 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-072-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 72 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-120-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 10 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-1200-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 100 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-180-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 15 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-300-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 25 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-600-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 50 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 58-900-1M Molded BNC to BNC Coaxial Cable Assembly (RG58/U 75 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-012-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 12 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-024-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 24 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-036-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 36 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-048-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 48 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-060-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 60 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-072-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 72 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-120-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 10 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-1200-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 100 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-180-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 15 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-300-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 25 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-600-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 50 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 59-900-1M Molded BNC to BNC Coaxial Cable Assembly (RG59/U 75 feet) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Flexible Dmm Test Lead Set With Sheathed Style Banana Plugs

The Associated 6043 inductive amp probe is capable of measurements up to 1000A. The large 2" jaw opening allows for easy use on the largest set of cables.  Compatible with most Digital Multimeters, the unit comes with a 10 ft. coiled cord with standard banana plugs.  The unit has two settings 200A and 1000A for improved accuracy and a zeroing button for use on DC circuits.  LED's indicators include a power "ON" as well as a "LOW BATTERY".  Unit is powered by a standard 9V battery for long life.

TEST LEAD SET RED,BLACK

TPI 62-024-1M Molded BNC to BNC Coaxial Cable Assembly (RG62/U 24 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 62-036-1M Molded BNC to BNC Coaxial Cable Assembly (RG62/U 36 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 62-048-1M Molded BNC to BNC Coaxial Cable Assembly (RG62/U 48 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 62-060-1M Molded BNC to BNC Coaxial Cable Assembly (RG62/U 60 inch) - TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

TPI 621 Digital Manometer -  Dual Differential Input Manometer with ±120 inH2O range and 0.001 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 621C3 Digital Manometer - Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

TPI 623 Digital Manometer  -  Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

TPI 625 Digital Manometer -  Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 635 Digital Manometer  -  Dual Differential Input Manometer with ±5 psi range and 0.001 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

Stainless steel probe pierces insulation on 22 to 14 AWG (0.030” through 0.180” diameter) gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. Banana jack accepts all DMM and banana jack leads, Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4 mm banana plugs. Tested to 60 V DC.

Make connections to terminals inside connectors up to 1” (24,39mm) deep. Pin can be bent to fit into tight spaces, banana Jack fits modular test leads, such as Pomona models 5907A, 5908A and 5909A. Bright yellow color is easy to find in poor light. Not intended for hand-held use at voltages above 33Vrms / 70Vdc. Max current: 3 Amperes Max.

TPI 645NPT Digital Manometer  -    Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. ¼” NPT fittings.

OTC 6589 Electronic Ignition Spark Tester - Used to check for spark on electronic ignition, gasoline engines used in import and domestic cars and trucks, as well as small engines.

TPI 665 Digital Manometer -  Dual Input Differential Manometer with ±100 psi range and 0.01 psi resolution. Data logging with optional A665 software and docking station. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. ¼” NPT fittings.

TPI 665L Digital Manometer  -  The slim design 665L is a hand-held, differential input manometer with data logging capability. Digital filter, min/max, one touch zero, and backlight display are just a few of the features of the 665.

TPI 706 High CO Analyzer -  Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button. The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

TPI 707 Carbon Monoxide (CO) Analyzer  -  Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use. The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up if the date of calibration is one year or older.

TPI 708 Combustion Efficiency Analyzer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740 Combines the 708 Combustion Efficiency Analyzer with the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740OIL Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A788 Smoke Test Pump & Filter Paper, A790 Analog Oil Pressure Gauge and the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C10 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A740 Infrared Printer, 2 GK13M K-Type General Purpose Beaded Tip Probes, 2 A603 Brass Fittings (1/8" NPT x 1/4" Barb) and 2 A605 Brass Fittings (1/4" T-Fittings)  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C5 Combines: 708 Combustion Efficiency Analyzer and 270 Autoranging Digital Clamp with Capacitance  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C7 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance and A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C8 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C9 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance, 621 Digital Manometer, A740 Infrared Printer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708OIL Combines: 708 Combustion Efficiency Analyzer with the A788 Smoke Test Pump with Filter Paper -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709 Combustion Efficiency Analyzer and Differential Manometer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740 Combines the 709 Combustion Efficiency Analyzer and Differential Manometer with the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740C1 Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A740 Infrared Printer and A773 Sulfur Filter - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740OIL Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A740 Infrared Printer, A773 Sulfur Filter, A790 Analog Oil Pressure Gauge and A788 Smoke Test Pump with Filter Paper - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740OIL Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A773 Sulfur Filter, A790 Analog Oil Pressure Gauge and A788 Smoke Test Pump with Filter Paper - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709R Combustion Efficiency Analyzer and Differential Manometer with Rechargeable Ni-Mh Batteries - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709RA740 Combines the 709R Combustion Efficiency Analyzer and Differential Manometer with Rechargeable Ni-Mh Batteries and the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740 Combines the 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface with the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740C1 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, A740 Infrared Printer and A773 Sulfur Filter - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740OIL Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, A740 Infrared Printer, A773 Sulfur Filter, A788 Smoke Test Pump with Filter Paper and A790 Analog Oil Pressure Gauge - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712C5 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface and 270 Autoranging Digital Clamp with Capacitance - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712C7 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, 270 Autoranging Digital Clamp with Capacitance and A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 715 High CO (above 10,000ppm carbon monoxide) Combustion Analyzer with Built-in Differential Thermometer, Differential Manometer, and NO Measurement & NOX Calculation - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

716NA740 TPI 716N Combustion Analyzer And A740

TPI 719 Combustible Gas Leak Detector - Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable “tic” rate helps eliminate background gas concentration in contaminated environments. The 719 is easy to use and is built to last. It is backed by a 3 year limited warranty.

TPI 720B Combustible Gas Leak Detector - Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable “tic” rate helps eliminate background gas concentration in contaminated environments.  The 720B is an advanced state-of-the-art leak detector capable of detecting many combustible, noncombustible and toxic gases.

TPI 721 Combustible Gas Leak Detector -  The 721 offers 10ppm sensitivity to detect combustible gasses. Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable “tic” rate helps eliminate background gas concentration in contaminated environments.

TPI Model 725 Combustible Gas Leak Detector -  The 725 offers 1000ppm sensitivity to detect combustible gasses including natural gas, methane, propane (LPG), diesel, and kerosene. Trace fuel lines, tanks and containers for gas leaks. Once a leak is detected, the 725 will sound an alarm and the red LED’s will light showing level of leak.

TPI 735A Combustible Gas Leak Detector -  Designed to quickly and accurately measure natural and propane gas leaks, as well as carbon monoxide concentrations.

TPI 731K1 Combustible Gas Detector -  Meets the requirements for latest NFPA 54 fuel gas purging requirements for large gas systems. Measure combustible leaks, LEL and % volume. Provides personal protection from potential hazardous conditions and help find the source of combustible gases fast!

TPI 739A Combustible Gas Leak Detector - Designed to provide personal protection from potential hazardous conditions and help find the source of combustible gases fast!

TPI 750A Refrigerant Leak Detector -  The 750a features 400 hour sensor life under normal use; a spare sensor is included with each instrument for a total of 800 hours of continuous use and can detect leaks as small as 0.2 ounces per year (R134a / R22).

TPI 753A Refrigerant Leak Detector - The 750a features 400 hour sensor life under normal use; a spare sensor is included with each instrument for a total of 800 hours of continuous use and can detect leaks as small as 0.1 ounces per year (R134a / R22). Whether testing for leaks in air conditioning, refrigeration, or automotive AC, the versatile 700 series spans the diverse needs of technicians, refrigeration engineers, and maintenance personnel around the globe. From freezer coils to heat pumps, experience fast, reliable results that save you both time and money.

OTC 7645 Parasitic Draw Test Switch - Finding electrical problems that drain the battery is getting harder all the time.

TPI 770 Ambient CO Monitor / Analyzer -  Measure / monitor ambient CO levels in home and office spaces. Visual and audible alarm indicates unsafe CO levels. The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

TPI 775 Combination Carbon Monoxide / Combustible Gas Detector - The combo CO/Combustible gas detector is the first of its kind to combine both detection technologies into one easy to use hand-held and affordable instrument. Your 775 is guaranteed free from defects in materials and workmanship for 3 Years from the date of purchase. The Carbon Monoxide sensor is only guaranteed for 2 years.

One-Man Testing for Male and Female 7-Way Round Pin Tractor-Trailer Plugs

Tests Trailer Circuits Quickly and Easily on Most Light and Medium-Duty Trucks and Campers

Test tow circuits from vehicle's 6-way round connector to verify proper lighting and brake operation.

Chase down short circuits without blowing fuses!

805-53-000 TPI BNC Shunt 50 Ohm ±1% Dc - 1 Ghz 1 Watt

Fluke Thermocouple Module - Converts DMM To Thermometer. Fast, High Accuracy Temperature Measurement Compatible with any DMM having 10MW or greater input impedance and a mV dc scale.

The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment. The 80 Series V operates very similar to the classic 80 series, but with more problem solving power, safety, convenience and impact protection. The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

TPI 9000 Pocket Inspection System -  TPI Model 9000 Inspection. Are your Inspections really getting done? Verify inspections are getting done. Easy To use. Consistently capture the same Metrics for every asset. Value priced. Rugged IP67 case. Automated report generation. Optional: RFID and network.

TPI 9020 Pro Vibration Inspection Meter -  TPI Model 9020 Pro. The next step in vibration analysis: easy to use low cost Machinery Health Monitoring. Diagnose basic vibration problems: out of balance, misalignment, looseness, and bearing damage.

TPI 9070 Smart Vibration Meter -  9070 Smart Vibration Meter. Vibration analysis at the touch of a button. Analyze and Interprets readings; incredible performance at an unbelievably low price. Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).  The TPI 9070 is a simple, easy to use, low cost vibration meter that records, analyze and displays vibration signals at the push of a button.

A002 TPI 1.5 Volt “Aa” Battery (1 Each)

A004 TPI Nicad Battery Pack For The 440

A006 TPI Ni-Mhd Battery Pack For The 460

A007 TPI Ni Cad Battery Pack

A009 TPI 9 Volt Carbon Battery

A009A TPI 9 Volt Alkaline Battery

A020 TPI Flame Current Test Lead

TPI A032B 5-Way Straight Nose Bed Of Nails - Black Boot Test Lead Tip.

TPI A032BL 5-Way Straight Nose Bed Of Nails - Blue Boot Test Lead Tip.

TPI A032R 5-Way Straight Nose Bed Of Nails - Red Boot Test Lead Tip.

TPI A033B 5-Way Bent Nose Bed Of Nails - Black Boot Test Lead Tip

TPI A033BL 5-Way Bent Nose Bed Of Nails - Blue Boot Test Lead Tip

TPI A033R 5-Way Bent Nose Bed Of Nails - Red Boot Test Lead Tip

TPI A034 Small Fully Insulated Crocodile Clip Set (1 Black & 1 Red) - Test Lead Tip Set.

TPI A034B Small Fully Insulated Crocodile Clip (Black)

TPI A034 Small Fully Insulated Crocodile Clip (Red)

TPI A035 Lighted Test Lead - TPI test leads provide safety, reliability, and versatility to your test equipment. The TPI line includes push-on tip, screw-on tip, and modular lead designs. Fused test leads and specialty leads are also available for various applications.

TPI A036 Modular Fused Prod Test Lead Tip Set (1 Black & 1 Red)

TPI A036B Modular Fused Prod Test Lead Tip (Black)

TPI A036R Modular Fused Prod Test Lead Tip (Red)

TPI A037R Modular Standard Prod Test Lead Tip Set (1 Black & 1 Red)

TPI A037B Modular Standard Prod Test Lead Tip (Black)

TPI A037R Modular Standard Prod Test Lead Tip (Red)

TPI A038 Modular Sprung Hook Test Lead Tip Set (1 Black & 1 Red)

TPI A038R Modular Sprung Hook Test Lead Tip (Black)

TPI A038R Modular Sprung Hook Test Lead Tip (Red)

TPI A039 Modular Spade Terminal Test Lead Tip Set (1 Red & 1 Black)

TPI A039B Modular Spade Terminal Test Lead Tip (Black)

TPI A039R Modular Spade Terminal Test Lead Tip (Red)

TPI A040 Standard Vinyl Test Lead Set (PVC Insulation) (Push-On) -  Low cost leads accept push-on alligator clips.

TPI A041 Silicone Fused Test Lead Set with Screw On Alligator Clips (Inline Fuse) - Provides additional protection to the user.

A044 TPI 1.5 Volt Lr44 Button Battery (1 Each)

TPI A050 Standard Vinyl Test Lead Set With Alligator Clips (Screw-On) (PVC Insulation) -  A wide range of screw-on accessories including modular adaptors.

A051 TPI 8 Inch Probe Extensions

TPI A052 M4.0 / 0.7 Thread Safety Plug Adapter Set -  Accepts widest range of accessories, most versatile lead type.

TPI A054 Probe Tip Set (Sharp Steel Point With Standard Socket) (1 Black & 1 Red) -  Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A054B Probe Tip (Sharp Steel Point With Standard Socket) (Black)- Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A054R Probe Tip (Sharp Steel Point With Standard Socket) (Red) -  Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A055 Prod Set with Tapered Stainless Steel Tip (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A055B Prod with Tapered Stainless Steel Tip (Black) - Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A055R Prod with Tapered Stainless Steel Tip (Red) - Accepts widest range of accessories, most versatile lead type.Modular Prods Test Lead Tips

TPI A057 Probing Probes Test Lead Tip Set (incorporate a spring steel prod) (1 Black & 1 Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A057B Probing Probe Test Lead Tip (incorporate a spring steel prod) (Black) -  Accepts widest range of accessories, most versatile lead type.

TPI A057R Probing Probe Test Lead Tip (incorporate a spring steel prod) (Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A058 Flanged Fully Insulated Crocodile Clip Test Lead Tip Set (1 Black & 1 Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A058B Flanged Fully Insulated Crocodile Clip Test Lead Tip (Black) -  Accepts widest range of accessories, most versatile lead type.

TPI A058 Flanged Fully Insulated Crocodile Clip Test Lead Tip Set (1 Black & 1 Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A059 Insulation Piercing Prod Test Lead Tip Set (Sharp Steel Point with Standard Socket) (1 Black & 1 Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A059B Insulation Piercing Prod Test Lead Tip (Sharp Steel Point with Standard Socket) (Black) -  Accepts widest range of accessories, most versatile lead type.

TPI A059R Insulation Piercing Prod Test Lead Tip (Sharp Steel Point with Standard Socket) (Red) -  Accepts widest range of accessories, most versatile lead type.

TPI A060 6-Foot Shielded Test Lead Set with Alligator Clips (Screw-On) - A wide range of screw-on accessories including modular adaptors. TPI test leads provide safety, reliability, and versatility to your test equipment. The TPI line includes push-on tip, screw-on tip, and modular lead designs. Fused test leads and specialty leads are also available for various applications.

TPI A061 Probe Set (Banana Plug Adapter) (1 Black & 1 Red)

A061B TPI Black Back Probe With Banana Plug Adapter

A061R TPI Red Back Probe With Banana Plug Adapter

TPI A065 10 Foot Shielded Test Leads Set with Alligator Clips (Black & Red) - A wide range of screw-on accessories including modular adaptors. TPI test leads provide safety, reliability, and versatility to your test equipment. The TPI line includes push-on tip, screw-on tip, and modular lead designs. Fused test leads and specialty leads are also available for various applications.

TPI A066 1000V Fully Insulated Crocodile Clip Set (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A066B 1000V Fully Insulated Crocodile Clip (Black) - A wide range of screw-on accessories including modular adaptors.

TPI A066R 1000V Fully Insulated Crocodile Clip (Red) - A wide range of screw-on accessories including modular adaptors.

TPI A067 Modular Grabber Clip Set (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A067B Modular Grabber Clip (Black) - A wide range of screw-on accessories including modular adaptors.

TPI A067R Modular Grabber Clip (Red) - A wide range of screw-on accessories including modular adaptors.

TPI A068 Modular Safety Crocodile Clip Set (1000V Rated) (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A068B Modular Safety Crocodile Clip (1000V Rated) (Black) - A wide range of screw-on accessories including modular adaptors.

TPI A068 Modular Safety Crocodile Clip Set (1000V Rated) (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A069 Plunger Clip Set (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A069B Plunger Clip (Black) - A wide range of screw-on accessories including modular adaptors.

TPI A069 Plunger Clip Set (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A070 UL Approved Test Lead Set without Alligator Clips (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A072 Standard Test Lead Set (Black Lead with Battery Clip) For Insulation Resistance Testers - A wide range of screw-on accessories including modular adaptors. TPI test leads provide safety, reliability, and versatility to your test equipment. The TPI line includes push-on tip, screw-on tip, and modular lead designs. Fused test leads and specialty leads are also available for various applications.

TPI A073 4 Foot Large Alligator Clip Lead Set For Insulation Resistance Testers - A wide range of screw-on accessories including modular adaptors. TPI test leads provide safety, reliability, and versatility to your test equipment. The TPI line includes push-on tip, screw-on tip, and modular lead designs. Fused test leads and specialty leads are also available for various applications.

TPI A075 UL Approved Test Lead Set with Alligator Clips (Black & Red) - A wide range of screw-on accessories including modular adaptors.

TPI A079 Modular Silicone Test Lead Set (Fixed Shroud Plug to Fixed Shroud Plug) (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.

TPI A080 Test Lead Set with Threaded Tips (1 Black & 1 Red) - A wide range of screw-on accessories including modular adaptors.

TPI A081 Modular Silicone Test Lead Set (Right Angle Fixed Shroud Plug to Straight Shutter Plug) (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.

TPI A082 Modular Silicone Test Lead Set (Right Angle Fixed Shroud Plug to Fixed Shroud Plug) (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.

TPI A083 Fused Prob 2mm Fixed Tip Set (1 Black & 1 Red) -  Provides additional protection to the user.

TPI A083B Fused Prob 2mm Fixed Tip No Leads (Black) (For Use With A088 Lead Set) - Provides additional protection to the user.

TPI A083R Fused Prob 2mm Fixed Tip No Leads (Red) (For Use With A088 Lead Set) - Provides additional protection to the user.

TPI A084 Fused Prob Screw in Flanged Crocodile Clip Set (1 Black & 1 Red) - Provides additional protection to the user.

TPI A084B Fused Prob Screw in Flanged Crocodile Clip (Black) - Provides additional protection to the user.

TPI A084 Fused Prob Screw in Flanged Crocodile Clip Set (1 Black & 1 Red) - Provides additional protection to the user.

TPI A085 Test Leads with Threaded Tips and Screw on Alligator Clips Set (Black & Red) - Provides additional protection to the user.

TPI A086 Modular Silicone Test Lead Set (Straight Shutter Plug to Straight Shutter Plug) (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.

TPI A087 Modular Silicone Test Lead Set (Straight Fixed Shroud Plug to Straight Shutter Plug) (1 Black & 1 Red) - Accepts widest range of accessories, most versatile lead type.

TPI A088 Deluxe Fuse Prob Handle and Lead Assembly Set (1 Black & 1 Red) - Provides additional protection to the user.

TPI A088B Deluxe Fuse Prob Handle and Lead Assembly (Black) - Provides additional protection to the user.

TPI A088R Deluxe Fuse Prob Handle and Lead Assembly (Red) - Provides additional protection to the user.

TPI A089 Deluxe Fused Test Lead Kit - Provides additional protection to the user.

A090 TPI Test Lead Set For Fused Test Prods

A091 TPI Fused Test Prods (1 Red 1 Black)

A092 TPI Fused Test Lead Set With 5 Extra Fuses

A093 TPI Fused Test Lead Set 5 Extra Fuses 8 Inch Probe Extensions

A095 TPI 460 Test Lead Set

A100 TPI Soft Carrying Case For 133 135 153 163 183,185

A100SG TPI Safety Green Soft Carrying Case For 100 Series Dmm

A101 TPI Rubber Boot For 100 Series DMM's