Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Plasma Cutter Parts > M12150 83-329 3015 Marquette Plasma Cutter

M12150 83-329 3015 Marquette Plasma Cutter



Item Stock # Customer # Description
1 238-712-666 B7000380 Cover
2 246271 Lamp
3 261542 Power Cord
5 411-117-016 260565 Base
6 B7004370 Fitting, 5/32" push-in
7 246-532-666 B7005380 Pressure Switch
8 254-006-666 B7006380 Regulator
9 246-516-666 B7007380 Solenoid Valve
12 B7009380 Terminal Board
13 246-527-666 261543, B7010380 Power Switch
14 213-043-666 260468 Capacitor
15 261544 Front Panel
16 B7013380 Coupling
17 251-030-666 B7014380 Gauge
18 245-170-666 B7015380 Lamp Holder
19 B7016380 Strain Relief
21 414-020-666 B7018380 Strain Relief
22 312-523-666 B7019380 Handle
23 238-709-666 B7020380 Ground Cable
24 411-107-026 250224 Cover
28a 244-089-666 261546 Rectifier
28b B7025380 Rectifier (Old version)
29 246-518-666 B7026380 Contactor
30 216-113-666 B7027380 Fan Blade
31 216-108-666 246224 Fan Motor
32 251189 Resistor
33 412-752-666 246188 Fan Support
34 880-583-666 261547 Transformer
35 261548 Thermostat
36 413-118-666 B7033380 Wheel
37 413-115-666 B7034380 Axle
38 412-756-666 B7035380 Foot
39 412-751-666 261549 Divider
40 312-518-666 B7037380 Torch Handle & Trigger
41a 261550 Main Circuit Board
41b 880-589-000 B7038380 Main PCB (Old Version)
42 334-629-000 B7039380 Torch Head
43 334-592-000 M15802, 83-628 Standard Electrode
43 334-594-000 M15807,83-633 Long Electrode
44 334-589-000 M15803,M15852,83-629 Swirl Ring
45 334-653-000 M15814, 83-366 Std. Nozzle
45 334-593-000 M15805, 83-631 Long Nozzle
46 334-651-000 M15810, 83-662 Nozzle Holder
47 B7044380 Torch Cable
48 334-636-000 M15822,250748,83-675 Complete Torch (13')
Sort By:
216-108-000 Christie Automotive Fan Motor 120v .218 shaft 216-108-000 Christie Automotive Fan Motor 120v .218 shaft

216-108-000 Christie Automotive Fan Motor 120v .218 shaft

Discontinued See 610190
334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852

334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 - Plasma 25 35 Amp. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $34.95 Each
334-592-000 Electrode Plasma 25 Amp 5 Pkg Q15802 334-592-000 Electrode Plasma 25 Amp 5 Pkg Q15802

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $24.65 5 Pack
334-593-000 Nozzle Long 1.0mm 25 - 35 Amp 3pk M15805 YA22254 83-631 334-593-000 Nozzle Long 1.0mm 25 - 35 Amp M15805 YA22254 83-631 (3 Pack)

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $19.50 3 Pack
334-594-000 Electrode Plasma Long 25 - 35 Amp 2 Pkg M15807 334-594-000 Electrode Plasma Long 25 - 35 Amp M15807 (2 Pack)

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $11.50 2 Pack
334-629-000 Plasma Torch Head 25 Amp 334-629-000 Plasma Torch Head 25 Amp

Plasma Torch Head 25 Amp, This Torch is used on Models M12149, 83-382, YA2225, P10015 & Plasma 115. This Torch also replaces the M15801 and 83-627 (18’ Torch) used on models M12150, 83-329 & 3015

Discontinued
334-636-000 Plasma Torch Complete 13 Ft 25 Amp 334-636-000 Plasma Torch Complete 13 Ft 25 Amp

334-636-000 Plasma Torch, 13 Ft 25 Amp, This Torch is used on Models M12149, 83-382, YA2225, P10015 & Plasma 115. This Torch also replaces the M15801 and 83-627 (18’ Torch) used on models M12150, 83-329 & 3015. Includes Torch Head, Torch Body With Switch, Torch Cable / Hose Assembly, Nozzle Cap, Nozzle, Electrode, Swirl Ring. Some assembly required.

Discontinued
334-651-000 Nozzle Cap Plasma 25 35 Amp 334-651-000 Nozzle Cap Plasma 25 35 Amp

Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.  334-651-000 Nozzle Cap Plasma 25 35 Amp

Each
Discontinued
334-653-000 Nozzle Short 1.0mm 25 - 35 Amp 5pk M15814 YA22252 83-666 334-653-000 Nozzle Short 1.0mm 25 - 35 Amp 5pk M15814 YA22252 83-666

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $15.00 5 Pack
413-115-666 Wheels Axle Hub Set 413-115-666 Wheels Axle Hub Set

413-115-666 Wheels Axle Hub Set. 3/8" OD axle x 13-1/4" long.

Price $24.17
M15802 Marquette Electrode Plasma 25 Amp 5 Pkg M15802 Marquette Electrode Plasma 25 Amp 5 Pkg

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $24.65 5 Pack
M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852

M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 With Notches - Plasma 25 35 Amp M15852. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $34.95 Each
M15804 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk M15804 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631 M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631

M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631 The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $18.55 3 Pack
M15807 Marquette Electrode Plasma Long 25 - 35 Amp 2 Pkg M15807 Marquette Electrode Plasma Long 25 - 35 Amp 2 Pkg

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded. 334-594-000

Price $11.25 2 Pack
M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152 M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152

M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152. Original double point spacer with spring tension ring and set screw.

Discontinued
M15810 Marquette Nozzle Cap Plasma 25 35 Amp M15810 Marquette Nozzle Cap Plasma 25 35 Amp

Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Price $26.95 Each
M15811 Short Nozzle 0.9mm Plasma 25 - 35 Amp 5pk M15811 Short Nozzle 0.9mm Plasma 25 - 35 Amp 5pk

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15812 Short Nozzle 1.2mm Plasma 25 - 35 Amp 5pk 83-664 M15812 Short Nozzle 1.2mm Plasma 25 - 35 Amp 5pk 83-664

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15813 Nozzle Long 0.9mm 25 - 35 Amp 3pk YA5550A5 83-665 M15813 Nozzle Long 0.9mm 25 - 35 Amp 3pk YA5550A5 83-665

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $19.65 3 Pack
   
 
M12150 83-329 3015 Marquette Plasma Cutter