246-534-666 Switch Voltage Status JNC Push Button
246-534-666 Switch Voltage Status JNC Push Button Kit (New Style). Includes all necessary wiring for both older wiring options with large hole. For JNC950 & JNC1224 Only. If your unit has the older style switch with ring terminals only see 246-004-666.
249-066-666 Solar Booster Clamps Positive & Negative
Clamps Positive & Negative. Screw Type Connection for ring terminal cables to anchor wire for solderless connection. Dual Hot Jaws for better power distribution. Includes Phillips anchor screws. Does not include hardware for cables, (ring terminals, solder etc...).
Discontinued - replaced by 238-006-666
249-093-900 Black Negative Booster Clamp
Black Negative Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.
249-094-900 Red Positive Booster Clamp
Red Positive Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.
312-427-000 Clamp Cover (EACH)
Clamp Cover For Jumper Cable Clamps. Prevents shorting during transportation and protects clamps from damage.
Discontinued
865-117-666 Internal Charger & PC Board Assembly
Internal Charger PC board Assembly with LED's for New Style Automatic Charging models and upgrade* to older units. Includes power supply, mounting bracket, circuit board, Charging status decal.
*Some modification to your older unit may be necessary to fit the new LED display.
865-225-666 Internal Charger PC board Assembly JNC660 JNCXF
865-225-666 Internal Charger PC board Assembly JNC660 JNCXF. Internal Charger PC board Assembly with LED's for JNC660 & JNCXF New Style Automatic Charging models. Includes power supply, mounting bracket, circuit board, Charging status decal.
Discontinued See 865-117-666
ESA1 Male To Male 12 Volt Outlet Charger Cord
ESA1 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 48" adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements.
ESA30 OBD II Memory Saver Connector
Clore Automotive introduces the SOLAR ESA30 OBD II Memory Saver Connector, a memory saver connector that can be used in conjunction with a jump starter to preserve vehicle codes and electronic presets while a vehicle’s battery is disconnected. The ESA30 can be used on any jump starter with a 12 Volt power port. The ESA30 acts as an interface connector between a jump starter and a vehicle’s OBD II port. This prevents any electronic memory loss when disconnecting a vehicle’s battery. A proper connection is confirmed by the ESA30’s built-in LED light.
ESA5 Male To Male 15 Ft 12 Volt Outlet Charger Cord Jumper
ESA5 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 15' adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump-pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements. We also have one in a 6ft. length here.
JNC660 Jump-N-Carry 1700 Peak Amp 12 Volt Jump Starter
The JNC660 Features 1700 Peak Amps of power with a 22 Amp Hour sealed lead acid battery and now features an automatic float mode 115v. Auto Charging Unit to prevent overcharging, you can leave it on a charge indefinitely and its always ready to go. The new charger also means longer battery life. Battery status indicator gauge shows battery status with a push of a button. Heavy duty 46" #2 welding cables provide ample power for even tough starts on trucks.
JNC8550 Jump-N-Carry 550 Start Assist Amp 12V Capacitor Jump Starter
New Ultracapacitor Jump Starters from Jump-N-Carry provide plenty of power for starting vehicles of all shapes and sizes, such as cars, SUVs, light and medium duty trucks. These units utilize an ultracapacitor power source, which is largely unaffected by cold temperatures, providing approximately the same starting power whether it is 70˚F or -30˚F. Ultracapacitor power supply delivers a whopping 550 Start Assist Amps. Features 46” #4 AWG Cables and Heavy-Duty PowerJAW™ Clamps. A Internal lithium battery to charge unit even at temperatures as low as -40˚F. Easy-to-use design and Includes wall charger and 12V charging cord. 1 Year Limited Warranty
JNC8800 Jump-N-Carry 800 Start Assist Amp 12V Capacitor Jump Starter
New Ultracapacitor Jump Starters from Jump-N-Carry provide plenty of power for starting vehicles of all shapes and sizes, such as cars, SUVs, light and medium duty trucks. These units utilize an ultracapacitor power source, which is largely unaffected by cold temperatures, providing approximately the same starting power whether it is 70˚F or -30˚F. Ultracapacitor power supply delivers a whopping 800 Start Assist Amps. Features 68” #2 AWG Cables and Heavy-Duty PowerJAW™ Clamps. A Internal lithium battery to charge unit even at temperatures as low as -40˚F. Easy-to-use design and Includes wall charger and 12V charging cord. 1 Year Limited Warranty
