Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Air Tool Repair Parts > Ingersoll-Rand Air Tool Repair Parts > Ingersoll-Rand 2940P 1" Drive Air Impact Wrench Repair Parts

Ingersoll-Rand 2940P 1" Drive Air Impact Wrench Repair Parts

Item Part Number Part Description Part Number
1 Motor Housing Assembly 2940P-A40
2 9359 Inlet Bushing 2940P-A565
3 Washer ---
4 9464 Exhaust Deflector 2940P-23
5 Air Strainer Screen ---
6 Throttle Valve Spring ---
7 Throttle Valve ---
8 Throttle Valve Face ---
9 Throttle Valve Plunger ---
10 Exhaust Screen ---
11 Exhaust Silencer 2940P-311
12 Exhaust Deflector Seal ---
13 Reverse Valve Bushing 2940P-330S
14 8579 Air Port Gasket (2) R44H-210A
15 8350 Gasket Retainer (2) 2940-200
16 Trigger 5RA-93
17 Trigger Spring ---
18 Trigger Retaining Pin ---
19 Trigger Bushing ---
20 Throttle Valve Assembly Retaining Pin 2940P-757
21 Throttle Valve Assembly 293-A302
22 Throttle Valve Bushing Assembly 293-A503
23 8571 Throttle Valve Bushing O-Ring (Large) AD100-18
24 8573 Throttle Valve Bushing O-Ring (Small) (2) AFH120A-358
25 8400 Throttle Valve Face O-Ring PS3-67
26 8140 Throttle Valve O-Ring 293-134
27 8144 Throttle Valve Stem O-Ring 293-669
28 Trigger Retaining Pin AF120-322
29 Reverse Valve Assembly 2940P-A329
30 Reverse Valve Seal 85H-167
32 Reverse Lever 2934-658A
33 8561 Reverse Lock Plunger 4U-663B
34 8562 Reverse Lock Spring 4U-664
35 Exhaust Diffuser 2940P-123
36 8567 Exhaust Silencer 2940P-311
37 Silencer Cover 2940P-240
38 Silencer Cover Screws (3) 401-638
39 Power Regulator Assembly 2940P-A249
40 Power Regulator Seal R1A-159
41 Power Regulator Retaining Ball AV1-255
42 Housing Cover Lock Washer (4) AV1-255
43 Housing Cover Capscrew (4) 510-638
44 Housing Cover Assembly 2934P-A102A
45 Oiler Adjusting Screw R2-71
46 8553 Oiler Felt R2-75
47 Grease Fitting 130SR-188
48 Oil Chamber Plug R4-227
49 8566 Oil Chamber Plug Gasket R4-92
50 8558 Housing Cover Gasket 2934-283
51 Motor Clamp Washer 2934-207
52 9044 Cylinder 2940-3
53 Cylinder Dowel 2940-98
54 8559 Rear Motor Bearing 508-97
55 8175 Rear End Plate 2934-12
56 Rotor 2940-53
57 2159 Vane Packet (Set of 6 Vanes) 2940-42-6
58 8730 Front End Plate 2934-11
59 8560 Front Rotor Bearing 810-97
60 8572 Hgammer Case Gasket 2940P-36
61 8885 Side Spade Handle Bracket 2934-364
62 Side Spade Handle T15-41
63 Side Spade Handle Stud 534-448
64 Side Spade Handle Nut 107-73A
65 Hammer Frame Assembly
9052 for 2940P 2940-A703
66 Hammer Pins
8139A or 8139B for 2940P 2940-704
67 Hammers (2)
8138 for 2940P 2940-724
68 1” Square Drive Anvil
9053 for 2940P 2940-726
69 Hammer Case Assembly
9042 for 2940P 2940-A727
for 2940P-EU 2940P-EU-A727
Hammer Case Label
70 9338 Hammer Case Bushing 2934-641
Hammer Case Label WARNING-2-99
Oversize Hammer Case Bushing (for 2940P only)
0.005” oversize 2934-641-5
0.010” oversize 2934-641-10
0.015” oversize 2934-641-15
71 Hammer Case Cap Screw Lock Washer (4) 34U-58
72 Hammer Case Cap Screw (4) 834-638
73 Socket Retainer RR10015S
79 Spline Drive Anvil Assembly
for 2940P 2940-A526
80 8143 Socket Retaining Ball D04-280
81 Retaining Ball Plunger 845-230
82 8141 Retaining Plunger Spring 2940-231
83 8142 Plunger Retaining Pin 845-128
Dead Handle (for 2940P only) 834-48
Horizontal Hanger 2934-366
Nameplate
for 2940P 2940P-301
for 2940P-EU 2940P-EU-301
Nameplate Screws (3) C32-302
9960 Tune-up Kit for 2940P only (includes illustrated items 11, 14[2], 15[2], 23, 24 [2], 25, 28, 30, 33, 34, 36, 40, 46, 49, 50, 54, 57, 59 and 60) 2940-TK3


Century Tool & Equipment is in no way affiliated with the above manufacturers. The parts advertised for sale are not always genuine parts, but are parts made for or by Century Tool & Equipment. Reference to said numbers are for your convenience only. We reserve the right to substitute genuine parts in place of Century Tool & Equipment parts.
Sort By:
Page of 1
100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools 100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

1 lb. Can tool lube. Standard-duty impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Discontinued See 105-1LB
105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube 105-4T Ingersoll-Rand Metallic Housing Grease 4 oz. Tube

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube. Metallic housing impact wrench grease. For use with GTH-1 grease gun.

Price $14.03
105-4T-6 Ingersoll Rand Metallic Housing Grease Pack (6 Pack) 105-4T-6 Ingersoll-Rand Metallic Housing Grease Pack (6 Pack)

Box of 6 4 oz. Tubes of IR Number 105 Grease. Metallic housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack) 1.

Price $79.85
105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing 105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

Ingersoll Rand Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $42.20
115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease 115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

1 lb. Can tool lube. Composite housing impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Unavailable
115-4T Ingersoll Rand Composite Grease 4 oz. Tube 115-4T Ingersoll-Rand Composite Grease 4 oz. Tube

115-4T Ingersoll Rand Composite Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 or other grease gun.

Price $15.00
115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit 115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $36.80
2159 2940-42 Rotor Vane Equivalent 2159 2940-42 Rotor Vane Equivalent Sold Each

Made In The USA2159  2940-42 Rotor Vane Equivalent - Sold Each

Price $3.64
293 Ingersoll Rand 1” Super-Duty Air Impact Wrench 293 Ingersoll-Rand 1" Super-Duty Air Impact Wrench

This is the most powerful 1” wrench for spring work, tractor pads, bus maintenance, and off-road and farm equipment work.

Price $4,909.00
Free Shipping
2940-724 Hammer (Genuine Ingersoll-Rand Part) 2940-724 Ingersoll-Rand Hammer

2940-724 Hammer (Genuine Ingersoll-Rand Part)

Price $515.00
8138 2940-724 Hammer 8138 2940-724 Hammer

Made In The USA8138  2940-724 Hammer

Price $212.85
8139A 2940-704 Hammer Pin W/Head 8139A 2940-704 Hammer Pin W/Head

Made In The USA8139A  2940-704 Hammer Pin W/Head

Price $32.60
8139B 2940-704 Hammer Pin W/Out Head 8139B 2940-704 Hammer Pin W/Out Head

Made In The USA8139B  2940-704 Hammer Pin W/Out Head

Price $24.75
8140 293-134 O-Ring 8140 293-134 O-Ring

Made In The USA8140  293-134 O-Ring

Price $1.80
8141 2940-231 Spring 8141 2940-231 Spring

Made In The USA8141  2940-231 Spring

Price $10.35
8142 845-128 Pin 8142 845-128 Pin

Made In The USA8142  845-128 Pin

Price $1.20
8143 D04-280 Socket Retaining Ball 8143 D04-280 Socket Retaining Ball

Made In The USA8143 D04-280 Socket Retaining Ball

Price $1.56
8144 293-669 Throttle valve stem O-ring 8144 293-669 Throttle valve stem O-ring

Made In The USA8144  293-669 Throttle valve stem O-ring

Price $2.00
8175 2934-12 Rear End Plate 8175 2934-12 Rear End Plate

Made In The USA8175  2934-12 Rear End Plate

Price $107.66
8270 R1A-159 Retainer O-ring 1/2" Equivalent 8270 R1A-159 Retainer O-ring 1/2" Equivalent

Made In The USA8270 R1A-159 Retainer O-ring 1/2" Equivalent

Price $0.36
8350 2940-200 Gasket Retainer 8350 2940-200 Gasket Retainer

Made In The USA8350  2940-200 Gasket Retainer

Price $3.00
8400 PS3-67 Reversing Valve Bushing Seal 8400 PS3-67 Reversing Valve Bushing Seal

Made In The USA8400 PS3-67 Reversing Valve Bushing Seal

Price $0.32
8553 R2-75 Oiler Felt 8553 R2-75 Oiler Felt

Made In The USA8553  R2-75 Oiler Felt

Price $0.75
8556 434-61 Air Strainer Screen 8556 434-61 Air Strainer Screen

Made In The USA8556  434-61 Air Strainer Screen

Price $5.78
8558 2934-283 Handle Gasket 8558 2934-283 Handle Gasket

Made In The USA8558  2934-283 Handle Gasket

Price $5.00
8559 508-97 Bearing Equivalent 8559 508-97 Bearing Equivalent

Made In The USA8559  508-97 Bearing Equivalent

Price $6.65
8560 810-97 Bearing Equivalent 8560 810-97 Bearing Equivalent

Made In The USA8560  810-97 Bearing Equivalent

Price $17.50
8561 4U-663B Reversing Lock Plunger 8561 4U-663B Reversing Lock Plunger

Made In The USA8561  4U-663B Reversing Lock Plunger

Price $4.16
8562 4U-664 Reversing Lock Plunger Spring 8562 4U-664 Reversing Lock Plunger Spring

Made In The USA8562  4U-664 Reversing Lock Plunger Spring

Price $2.25
8566 R4-92 Oil Chamber Plug Gasket 8566 R4-92 Oil Chamber Plug Gasket

Made In The USA8566 R4-92 Oil Chamber Plug Gasket

Price $2.00
8567 2940P-311 Silencer 8567 2940P-311 Silencer

Made In The USA8567  2940P-311 Silencer

Price $3.22
8571 AD100-18 O-Ring Throttle Valve 8571 AD100-18 O-Ring Throttle Valve

Made In The USA8571  AD100-18 O-Ring Throttle Valve

Price $2.52
8572 2940P-36 Hammer Case Gasket 8572 2940P-36 Hammer Case Gasket

Made In The USA8572  2940P-36 Hammer Case Gasket

Price $10.75
8573 AFH120A-358 O-Ring Throttle Valve (Each) 8573 AFH120A-358 O-Ring Throttle Valve (Each)

Made In The USA8573 AFH120A-358 O-Ring Throttle Valve (Each)

Price $0.54
8579 R44H-210A Air Port Gasket 8579 R44H-210A Air Port Gasket

Made In The USA8579  R44H-210A Air Port Gasket

Price $5.00
8730 2934-11 Front End Plate 8730 2934-11 Front End Plate

Made In The USA8730  2934-11 Front End Plate

Price $107.66
8885 2934-364 Bracket 8885 2934-364 Bracket

Made In The USA8885  2934-364 Bracket

Price $59.10
9042 2940-A727 Hammer Case Assembly 9042 2940-A727 Hammer Case Assembly

Made In The USA9042  2940-A727 Hammer Case Assembly

Price $371.25
9044 2940-3 Cylinder 9044 2940-3 Cylinder

Made In The USA9044  2940-3 Cylinder

Price $371.25
9052 2940-A703 Hammer Frame Assembly 9052 2940-A703 Hammer Frame Assembly

Made In The USA9052 2940-A703 Hammer Frame Assembly

Price $712.14
9053 2940-726 1" Square Anvil Standard Length 9053 2940-726 1" Square Anvil Standard Length

Made In The USA9053 2940-726 1" Square Anvil Standard Length

Price $361.85
9338 2934-641 Bushing 9338 2934-641 Bushing

Made In The USA9338  2934-641 Bushing

Price $44.35
9359 2940P-A565 Bushing 9359 2940P-A565 Bushing

Made In The USA9359 2940P-A565 Bushing

Price $114.99
9464 2940P-23 Deflector 9464 2940P-23 Deflector

Made In The USA9464  2940P-23 Deflector

Price $117.43
9960 2940P-TK3 Tune Up Kit Equivalent 9960 2940P-TK3 Tune Up Kit Equivalent

Made In The USA2940P-TK3 Tune-up Kit . Used On Ingersoll-Rand Model 2940P

Price $60.13
GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease. GTH-1 Ingersoll-Rand Grease Tube Head

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

Price $22.25
R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

Made In The USAIngersoll Rand R000A2-228 Push-type hand grease gun for flush-type fittings, holds up to 3 oz of grease.

Price $14.50