Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Air Tool Repair Parts > Ingersoll-Rand Air Tool Repair Parts > Ingersoll-Rand 290 1" Drive Air Impact Wrench Repair Parts

Ingersoll-Rand 290 1" Drive Air Impact Wrench Repair Parts

IR 290 Series Parts List
Item Part Number Part Description IR Part Number
1
Motor Housing Assembly 1712P-A40
2
Trigger 2934P-93
3 8564 Trigger Spring 2934P-51
4 8565 Trigger Pin R1AF-524
5
Trigger Bushing 2905-91S
6 8579 Air Port Gasket (2) R44H-210A
7 8350 Gasket Retainer (2) 2940-200
8 8598 Throttle Valve Assembly 2934P-A50
9 8554 Throttle Valve Face 2934-159
10 - Throttle Valve Plunger 2934P-302
11 8555 Throttle Valve Spring 834-51
12 8556 Air Strainer Screen 434-61
13 8650 Straight Inlet 845-565
14
Reverse Valve Bushing 2934P-330S
15
Reverse Valve Assembly 2934P-A329
16 8283 Reverse Valve Seal 85H-167
17 8850 Reverse Lever 2934-658A
18 8561 Reverse Lock Plunger 4U-663B
19 8562 Reverse Lock Spring 4U-664


Power Regulator Assembly 2934P-A249
20
Power Regulator 2934P-249
21 8270 Power Regulator Seal R1A-159
22 8282 Power Regulator Retaining Ball AV1-255
23
Housing Cover Lock Washer (4) 8U-58
24
Housing Cover Cap Screw (4) 510-638
25
Housing Cover Assembly 1712P-A102
28
Grease Fitting 130SR-188
31 8558 Housing Cover Gasket 2934-283
32
Motor ClampWasher 2934-207
33 9707 Cylinder 2934-3
34
Cylinder Dowel 2934-98
35 8559 Rear Rotor Bearing 508-97
36 8175 Rear End Plate 2934-12
37 9709 Rotor 2934-53
38 2158 Vane Packet (set of 6 Vanes) 2934-42-6
39 8730 Front End Plate 2934-11
40 8560 Front Rotor Bearing 810-97
41 8563 Hammer Case Gasket 2934-36
41A
Dead Handle 834-48
42
Side Spade Handle T15-41
43
Side Spade Handle Stud 534-448
44
Side Spade Handle Nut 107-73A
44A 8885 Side Spade Handle Bracket 2934-364
44B
Hanger Spacer (2) 2934-140
45 8851 Hammer Frame Assembly 2934-A703
46 8852A/8852B Hammer Pin (2) 2934-704
47
Hammer 1712-724
48
1” Square Drive Anvil


standard length 1712-726


6” extended length 280-726-6
49
Hammer Case Assembly


for 290, 290--6 and 290--S 1712B-A727


for 290--EU and 290--6--EU 1712B-EU-A727
50 9338 Hammer Case Bushing 2934-641
50A
Hammer Case Label


for 290, 290--6 and 290--S WARNING-2-99


for 290--EU and 290--6--EU EU-99
51
Hammer Case Cap Screw Lock


Washer (4) 34U-58
52
Hammer Case Cap Screw (4) 834-638
53
Socket Retainer RR10015S
53A
Muffler 2910-674
54
Spline Drive Anvil


standard length 1712-726


6” extended length 280-726-6
55 8143 Socket Retaining Ball D04-280
56
Retaining Ball Plunger 845-230
57 8141 Retaining Plunger Spring 2940-231
58 8142 Plunger Retaining Pin 845-128
59
Horizontal Hanger 2934-366
60
Nameplate


for 290--6 290-301-6


for 290--6--EU 290-6-EU-301


for 290 and 290--S 290-301


for 290--EU 290-EU-301
61
Nameplate Screw (3) C32-302
62
Bottle of Oil 405-M01
63
Grease 405-MG1
64
Lube Injector 230-228

9958 Tune-up Kit (includes illustrated parts
(3, 4,6 [2], 7 [2], 9, 11, 12, 27,16, 21,
22,18, 19, 30, 31, 35, 38, 40 and 41)
 2940-TK3


Century Tool & Equipment is in no way affiliated with the above manufacturers. The parts advertised for sale are not always genuine parts, but are parts made for or by Century Tool & Equipment. Reference to said numbers are for your convenience only. We reserve the right to substitute genuine parts in place of Century Tool & Equipment parts.
Sort By:
Page of 1
100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools 100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

1 lb. Can tool lube. Standard-duty impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Discontinued See 105-1LB
105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube 105-4T Ingersoll-Rand Metallic Housing Grease 4 oz. Tube

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube. Metallic housing impact wrench grease. For use with GTH-1 grease gun.

Price $14.03
105-4T-6 Ingersoll Rand Metallic Housing Grease Pack (6 Pack) 105-4T-6 Ingersoll-Rand Metallic Housing Grease Pack (6 Pack)

Box of 6 4 oz. Tubes of IR Number 105 Grease. Metallic housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack) 1.

Price $79.85
105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing 105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

Ingersoll Rand Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $42.20
115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease 115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

1 lb. Can tool lube. Composite housing impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Unavailable
115-4T Ingersoll Rand Composite Grease 4 oz. Tube 115-4T Ingersoll-Rand Composite Grease 4 oz. Tube

115-4T Ingersoll Rand Composite Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 or other grease gun.

Price $15.00
115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit 115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $36.80
2158 2934-42 Rotor Vane Equivalent 2158 2934-42 Rotor Vane Equivalent Sold Each

Made In The USA2158  2934-42 Rotor Vane Equivalent - Sold Each

Price $3.34
2158P 2934-42 Rotor Vane Plastic (Sold Each) 2158P 2934-42 Rotor Vane Plastic (Sold Each)

Made In The USA2158P 2934-42 Rotor Vane Plastic (Sold Each). Tougher than phenolic vanes usually resulting in longer life and power.

Price $3.95
290 Ingersoll Rand 1” Super-Duty Air Impact Wrench 290 Ingersoll-Rand 1” Super-Duty Air Impact Wrench

Designed for getting into cramped spaces with big power, the - has a three-way adjustable handle. It’s a good choice for spring work, tractor pads, bus maintenance, and off-road and farm equipment. Up to 1,600 ft.-lbs. of torque

Price $1,999.95
Free Shipping
8088 231-425A Socket Retainer 1/2" Equivalent 8088 231-425A Socket Retainer 1/2" Equivalent

Made In The USA8088 231-425A Socket Retainer 1/2" Equivalent

Price $2.40
8141 2940-231 Spring 8141 2940-231 Spring

Made In The USA8141  2940-231 Spring

Price $10.35
8142 845-128 Pin 8142 845-128 Pin

Made In The USA8142  845-128 Pin

Price $1.20
8143 D04-280 Socket Retaining Ball 8143 D04-280 Socket Retaining Ball

Made In The USA8143 D04-280 Socket Retaining Ball

Price $1.56
8175 2934-12 Rear End Plate 8175 2934-12 Rear End Plate

Made In The USA8175  2934-12 Rear End Plate

Price $107.66
8270 R1A-159 Retainer O-ring 1/2" Equivalent 8270 R1A-159 Retainer O-ring 1/2" Equivalent

Made In The USA8270 R1A-159 Retainer O-ring 1/2" Equivalent

Price $0.36
8282 AV1-255 Reversing Valve Detent Ball 8282 AV1-255 Reversing Valve Detent Ball

Made In The USA8282 AV1-255 Reversing Valve Detent Ball

Price $0.65
8283 85H-167 Reversing Valve Bushing Seal 8283 85H-167 Reversing Valve Bushing Seal

Made In The USA8283  85H-167 Reversing Valve Bushing Seal

Price $0.33
8350 2940-200 Gasket Retainer 8350 2940-200 Gasket Retainer

Made In The USA8350  2940-200 Gasket Retainer

Price $3.00
8554 2934-159 Throttle Valve Face 8554 2934-159 Throttle Valve Face

Made In The USA8554  2934-159 Throttle Valve Face

Price $0.63
8555 834-51 Throttle Valve Spring 8555 834-51 Throttle Valve Spring

Made In The USA8555  834-51 Throttle Valve Spring

Price $2.18
8556 434-61 Air Strainer Screen 8556 434-61 Air Strainer Screen

Made In The USA8556  434-61 Air Strainer Screen

Price $5.78
8558 2934-283 Handle Gasket 8558 2934-283 Handle Gasket

Made In The USA8558  2934-283 Handle Gasket

Price $5.00
8559 508-97 Bearing Equivalent 8559 508-97 Bearing Equivalent

Made In The USA8559  508-97 Bearing Equivalent

Price $6.65
8560 810-97 Bearing Equivalent 8560 810-97 Bearing Equivalent

Made In The USA8560  810-97 Bearing Equivalent

Price $17.50
8561 4U-663B Reversing Lock Plunger 8561 4U-663B Reversing Lock Plunger

Made In The USA8561  4U-663B Reversing Lock Plunger

Price $4.16
8562 4U-664 Reversing Lock Plunger Spring 8562 4U-664 Reversing Lock Plunger Spring

Made In The USA8562  4U-664 Reversing Lock Plunger Spring

Price $2.25
8563 2934-36 Hammer Case Gasket 8563 2934-36 Hammer Case Gasket

Made In The USA8563  2934-36 Hammer Case Gasket

Price $3.50
8564 2934P-51 Trigger Spring 8564 2934P-51 Trigger Spring

Made In The USA8564  2934P-51 Trigger Spring

Price $2.66
8565 R1AF-524 Trigger Pin 8565 R1AF-524 Trigger Pin

Made In The USA8565  R1AF-524 Trigger Pin

Price $0.75
8566 R4-92 Oil Chamber Plug Gasket 8566 R4-92 Oil Chamber Plug Gasket

Made In The USA8566 R4-92 Oil Chamber Plug Gasket

Price $2.00
8579 R44H-210A Air Port Gasket 8579 R44H-210A Air Port Gasket

Made In The USA8579  R44H-210A Air Port Gasket

Price $5.00
8598 2934-A50 Throttle Valve Assembly (Stainless) 8598 2934-A50 Throttle Valve Assembly (Stainless)

Made In The USA8598 2934-A50 Throttle Valve Assembly (Stainless)

Price $23.51
8650 845-565 Straight inlet 8650 845-565 Straight inlet

Made In The USA8650 845-565 Straight inlet. Now Stainless steel.

Price $55.23
8730 2934-11 Front End Plate 8730 2934-11 Front End Plate

Made In The USA8730  2934-11 Front End Plate

Price $107.66
8850 2934-658A Reversing Lever 8850 2934-658A Reversing Lever

Made In The USA8850  2934-658A Reversing Lever

Price $29.99
8851 2934-A703 Hammer Frame Assembly 8851 2934-A703 Hammer Frame Assembly

Made In The USA8851  2934-A703 Hammer Frame Assembly

Price $396.00
8852A 2934-704 Hammer Pin W/ Head 8852A 2934-704 Hammer Pin W/ Head

Made In The USA8852A  2934-704 Hammer Pin W/ Head

Price $18.98
8852B 2934-704 Hammer Pin W/Out Head 8852B 2934-704 Hammer Pin W/Out Head

Made In The USA8852B  2934-704 Hammer Pin W/Out Head

Price $18.98
8885 2934-364 Bracket 8885 2934-364 Bracket

Made In The USA8885  2934-364 Bracket

Price $59.10
9338 2934-641 Bushing 9338 2934-641 Bushing

Made In The USA9338  2934-641 Bushing

Price $44.35
9707 2934-3 Cylinder 9707 2934-3 Cylinder

Made In The USA9707  2934-3 Cylinder

Price $338.25
9709 2934-53 Rotor 9709 2934-53 Rotor

Made In The USA9709  2934-53 Rotor

Price $390.21
9958 290-TK2 Tune Up Kit Equivalent 9958 290-TK2 Tune Up Kit Equivalent

Made In The USA290-TK2 Tune-up Kit . Used On Ingersoll-Rand Model 290

Price $54.93
GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease. GTH-1 Ingersoll-Rand Grease Tube Head

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

Price $22.25
R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

Made In The USAIngersoll Rand R000A2-228 Push-type hand grease gun for flush-type fittings, holds up to 3 oz of grease.

Price $14.50