Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Air Tool Repair Parts > Ingersoll-Rand Air Tool Repair Parts > Ingersoll-Rand 285B 1" Drive Air Impact Wrench Repair Parts

Ingersoll-Rand 285B 1" Drive Air Impact Wrench Repair Parts

285B Series Parts List
Item Part Number Part Description IR Equivalent
1 9595 Trigger Handle Assembly (2, 3, 5, 6) 285B-A92A
2 9663 Trigger 285B-93A
3 9584 Slot Cover 285B-438
4
Nameplate and 4 rivets 285B-A301
5 9591
 Stop Pin 285B-439
6
Pin, Spring 285B-437
7 9588 Plunger, Throttle Valve 285B-302
8 9587 Throttle Valve 285B-50
9 9577 Spring, Throttle Valve 285B-51
10 8147 Inlet Bushing Assembly 285B-A565
11 9580 O-Ring 285B-566
12 9667 Reverse Valve Assembly
Includes 12,13,14,15,16,17 		285B-A329
13 9589 Stop Pin 285B-332
14 9586 Spring 285B-334
15 9590 Ball 285B-333
16 9579 Reverse Valve Seal 285B-338
17 9591 Pin, Spring 285B-120
18 9568 Gasket, Handle 285B-283
19 9668A/9668B Handle Cap Screw and washer

9668
 (Set of 8) 285B-A638
20 9582 Rear Rotor Bearing 285B-24
21 9620 End Plate with alignment pin 285B-A12
22
Pin, Spring
23 9669 Rotor 285B-53
24 2467 Vane Pack (Set of 6) 285B-42-6
25 9670 Cylinder and alignment pins 285B-A3
26 8478 Pin, Spring (2)
27 9619 Front End Plate 285B-11
28 9583 Front Rotor Bearing 285B-96
29 - Tool Gaurd 431L-32
30 9594 Motor Housing 285B-40
31 8614 Hammer Frame 285B-703
32 9672 Hammer 285B-724
33 9673 Hammer Cam 285B-721
34 9593 Anvil Assembly, Std. Length 285B-A726
35 9674 Anvil Assembly, 6" extended Length 285B-A726-6
36 9578
 O-Ring BBFM-557
37 8661
 Retainer Ring 910E5-918
38 -
 6" Extended #5 Spline Anvil 285B-A514-6
39 -
 O-Ring 285B-S-557
40 -
 Retaining Ring 285B-S-918
41 8613
 Side Plate 285B-706
42 9585 Hammer Case Gasket 285B-36
43 9613 Hammer Case Assembly 285B-A727
44 9679 Hammer Case Bushing 285B-641
45 9581 Oil Seal 285B-642
46 -
 Warning Label Warning-2-99
47 9596 Dead Handle (Angled) 285B-A48-6
48 9680 Dead Handle (Straight) 285B-A48
49 8489 Screw
49 8490 Washer (3)
50 8727 Hammer Case Guard
 431L-62
-
 9984 Tune up kit (includes items 3,7,8, 9,11,13,14,15,16,17,18,20,24,28,35, 36) 285B-TK1


Century Tool & Equipment is in no way affiliated with the above manufacturers. The parts advertised for sale are not always genuine parts, but are parts made for or by Century Tool & Equipment. Reference to said numbers are for your convenience only. We reserve the right to substitute genuine parts in place of Century Tool & Equipment parts.
Sort By:
Page of 1
100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools 100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

1 lb. Can tool lube. Standard-duty impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Discontinued See 105-1LB
105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube 105-4T Ingersoll-Rand Metallic Housing Grease 4 oz. Tube

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube. Metallic housing impact wrench grease. For use with GTH-1 grease gun.

Price $14.03
105-4T-6 Ingersoll Rand Metallic Housing Grease Pack (6 Pack) 105-4T-6 Ingersoll-Rand Metallic Housing Grease Pack (6 Pack)

Box of 6 4 oz. Tubes of IR Number 105 Grease. Metallic housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack) 1.

Price $79.85
105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing 105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

Ingersoll Rand Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $42.20
115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease 115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

1 lb. Can tool lube. Composite housing impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Unavailable
115-4T Ingersoll Rand Composite Grease 4 oz. Tube 115-4T Ingersoll-Rand Composite Grease 4 oz. Tube

115-4T Ingersoll Rand Composite Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 or other grease gun.

Price $11.44
115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit 115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $36.80
2467 285B-42 Rotor Vane Equivalent 2467 285B-42 Rotor Vane Equivalent Sold Each

Made In The USA2467  285B-42 Rotor Vane Equivalent - Sold Each

Price $4.26
285B Ingersoll Rand 1” Heavy-Duty Air Impact Wrench 285B Ingersoll-Rand 1" Heavy-Duty Air Impact Wrench

The - model combines exceptional power, durability and operator convenience.

Price $825.00
Free Shipping
285B-6 Ingersoll Rand 1” Heavy-Duty Extended Anvil Impact Wrench 285B-6 Ingersoll-Rand 1" Heavy-Duty Extended Anvil Impact Wrench

285B-6 Ingersoll-Rand 1" Heavy-Duty Extended Anvil Impact Wrench. 1” Heavy-Duty Extended Anvil Impact Wrench. Designed for the professional with over 1475 ft-lbs of torque for the toughest applications. New phenolic vanes resist harsh environments for less downtime on the job. Protective Rubber Tool Boot for all models of this air impact wrench. Durable design for handling the toughest jobs.  Improved feather-touch trigger enables impressive control of the air impact wrench. Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO. 1-year warranty

Price $712.49
Free Shipping
8147 285B-A565 Bushing Assembly Air Inlet 8147 285B-A565 Bushing Assembly Air Inlet

Made In The USA8147 285B-A565 Bushing Assembly Air Inlet

Price $32.47
8478 285B-98 Cylinder Dowel Pins 8478 285B-98 Cylinder Dowel Pins

Made In The USA8478  285B-98 Cylinder Dowel Pins

Price $1.16
8489 291-49 Dead Handle Screw 8489 291-49 Dead Handle Screw

Made In The USA8489  291-49 Dead Handle Screw

Price $0.78
8490 291-504 Lock Washer 8490 291-504 Lock Washer

Made In The USA8490  291-504 Lock Washer

Price $1.50
8613 Ingersoll-Rand 285B-706 Side Plate 8613 Ingersoll-Rand 285B-706 Side Plate

Made In The USA8613 Ingersoll-Rand 285B-706 Side Plate

Price $65.13
9568 285B-283 Handle Gasket 9568 285B-283 Handle Gasket

Made In The USA9568  285B-283 Handle Gasket

Price $4.00
9577 285B-51 Throttle Valve Spring 9577 285B-51 Throttle Valve Spring

Made In The USA9577  285B-51 Throttle Valve Spring

Price $2.06
9579 285B-338 Reversing Valve Seal 9579 285B-338 Reversing Valve Seal

Made In The USA9579  285B-338 Reversing Valve Seal

Price $0.48
9580 285B-566 O-Ring 9580 285B-566 O-Ring

Made In The USA9580  285B-566 O-Ring

Price $3.94
9581 285B-642 Oil Seal 9581 285B-642 Oil Seal

Made In The USA9581  285B-642 Oil Seal

Price $7.61
9582 285B-24 Bearing Equivalent 9582 285B-24 Bearing Equivalent

Made In The USA9582  285B-24 Bearing Equivalent

Price $5.07
9583 285B-96 Bearing Equivalent 9583 285B-96 Bearing Equivalent

Made In The USA9583  285B-96 Bearing Equivalent

Price $6.37
9584 285B-438 Slot Cover 9584 285B-438 Slot Cover

Made In The USA9584  285B-438 Slot Cover

Price $4.00
9585 285B-36 Hammer Case Gasket 9585 285B-36 Hammer Case Gasket

Made In The USA9585  285B-36 Hammer Case Gasket

Price $6.00
9586 285B-334 Spring 9586 285B-334 Spring

Made In The USA9586  285B-334 Spring

Price $2.15
9587 285B-50 Throttle Valve Equivalent 9587 285B-50 Throttle Valve Equivalent

Made In The USA9587 285B-50 Throttle Valve 5/8" (0.625") Diameter

Price $8.70
9588 285B-302 Throttle Valve Plunger 9588 285B-302 Throttle Valve Plunger

Made In The USA9588  285B-302 Throttle Valve Plunger

Price $7.43
9589 285B-332 Stop Pin 9589 285B-332 Stop Pin

Made In The USA9589  285B-332 Stop Pin

Price $0.78
9590 285B-333 Ball 9590 285B-333 Ball

Made In The USA9590  285B-333 Ball

Price $1.72
9591 285B-120 Spring Pin 9591 285B-120 Spring Pin

Made In The USA9591  285B-120 Spring Pin

Price $1.19
9593 285B-A726 1" Square Anvil Standard Length 9593 285B-A726 1" Square Anvil Standard Length

Made In The USA9593 285B-A726 1" Square Anvil Standard Length

Price $234.07
Unavailable
9594 285B-40 Motor Housing 9594 285B-40 Motor Housing

Made In The USA9594  285B-40 Motor Housing

Price $207.90
9595 285B-A92A Trigger Handle Assembly 9595 285B-A92A Trigger Handle Assembly

Made In The USA9595  285B-A92A Trigger Handle Assembly. Includes Trigger, Slot Cover, Stop Pin, Spring Pin.

Unavailable
9596 285B-A48-6 Dead Handle (Angled) 9596 285B-A48-6 Dead Handle (Angled)

Made In The USA9596  285B-A48-6 Dead Handle (Angled). Includes screws and washers.

Price $40.35
9613 285B-A727 Hammer Case Assembly Equivalent 9613 285B-A727 Hammer Case Assembly Equivalent

Made In The USA9613  285B-A727 Hammer Case Assembly. Includes 9679 Hammer Case Bushing (285B-641), 9581 Oil Seal (285B-642)

Price $156.75
9619 285B-11 Front End Plate 9619 285B-11 Front End Plate

Made In The USA9619  285B-11 Front End Plate

Price $150.00
9620 285B-A12 Rear End Plate 9620 285B-A12 Rear End Plate

Made In The USA9620  285B-A12 Rear End Plate

Price $80.90
9663 285B-93A Trigger 9663 285B-93A Trigger

Made In The USA9663  285B-93A Trigger

Price $17.67
9667 285B-A329 Ingersoll-Rand Reversing Valve Assembly 9667 285B-A329 Ingersoll-Rand Reversing Valve Assembly

Made In The USA9667 285B-A329 Ingersoll-Rand Reversing Valve Assembly (Aluminum). Includes Reversing Valve, 285B-332 Stop Pin, 285B-334 Spring, 285B-333 Ball, 285B-120 Spring Pin, 285B-338 Reversing Valve Seal.

Price $44.55
9668 285B-A638 Screw/Washer set of 8 9668 285B-A638 Ingersoll-Rand Screw/Washer set of 8

Made In The USA9668  285B-A638 Screw/Washer set of 8

Price $12.87
9668A 285B-638 Screw 9668A 285B-638 Ingersoll-Rand Screw

Made In The USA9668A  285B-638 Screw

Price $1.20
9668B 285B-638 Washer 9668B 285B-638 Ingersoll-Rand Washer

Made In The USA9668B  285B-638 Washer

Price $0.75
9669 285B-53 Rotor 9669 285B-53 Rotor

Made In The USA9669  285B-53 Rotor

Price $295.50
9670 285B-A3 Cylinder 9670 285B-A3 Cylinder

Made In The USA9670  285B-A3 Cylinder

Price $226.00
9672 285B-724 Ingersoll-Rand Hammer 9672 285B-724 Ingersoll-Rand Hammer

Made In The USA9672 285B-724 Ingersoll-Rand Hammer

Price $113.85
9673 285B-721 Hammer Cam 9673 285B-721 Hammer Cam

Made In The USA9673  285B-721 Hammer Cam

Price $117.38
9674 285B-A726-6 Anvil 6in. Extended 9674 285B-A726-6 Anvil 6in. Extended

Made In The USA9674  285B-A726-6 Anvil 6in. Extended

Price $287.95
9679 285B-641 Bushing 9679 285B-641 Bushing

Made In The USA9679  285B-641 Bushing

Price $57.75
9680 285B-A48 Dead Handle (Straight) 9680 285B-A48 Dead Handle (Straight)

Made In The USA9680  285B-A48 Dead Handle (Straight)

Price $45.15
9984 285B-TK1 Tune Up Kit Model 285B 9984 285B-TK1 Tune Up Kit Model 285B

Made In The USA9984 285B-TK1 Tune Up Kit Model 285B

Price $52.11
GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease. GTH-1 Ingersoll-Rand Grease Tube Head

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

Price $19.87
R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

Made In The USAIngersoll Rand R000A2-228 Push-type hand grease gun for flush-type fittings, holds up to 3 oz of grease.

Price $14.50