IBC6008MSK Associated 60/270 Amp 12 Volt Automatic Automotive Battery Charger / Analyzer

Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

Home > Battery Charging Equipment > Wheeled Battery Chargers - Automatic Operation >

IBC6008MSK Associated 60/270 Amp 12 Volt Automatic Automotive Battery Charger / Analyzer

Alternative Views:

Price $1,375.05

Product Code: ASOIBC6008MSK

Qty:

Description

Prop65

IBC6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port. Includes 12’ Memory Saver Cable and Terminal Covers. The IBC6008MSK provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima EFB & Lithium Deep Cycle Batteries. The Electrical Stability System (ESS™) technology turns 6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

Battery Types:

Standard Automotive
Deep‐cycle
AGM
Gel Cell
EFB
Lithium Deep Cycle Batteries

The IBC6008MSK has several advanced features making this a very versatile charger, replacing virtually all others.
Reflash Power: Used to hold the voltage on the battery at the set value while the vehicle is being serviced.
Memory Saver: Used with the Memory Saver option to hold up the vehicle voltage while charging the battery.
Crank: Used to assist starting a vehicle.
Manual: This mode can be used to operate the charger just like a manual charger runs for the time set while limiting the current and voltage.

The IBC6008MSK charger has several other parameters for set-up and use for a very accurate or specific charge.
Parameter Lock: Used to lock all the settings for the various battery types.
Volts At Bat: Voltage Drop; this is used to calibrate cable/clamp voltage drop.
Jump Con MOhms: Used to determine voltage drop for line drop calculations.
Manual Test: Used to test the unit in production.
Amp Output: Used to calibrate the current reading.
Maximum Current: Limits current out put of the charger. Can be used to limit heating of the battery. Some batteries have limits on maximum current for charging.
Hold Voltage: Depending on the battery type this could be the maximum voltage the battery is charged at or it may be gassing point where the current is reduced to charge the battery for maximum charge efficiency.
Run Time: This would be the maximum charge time allowed for charging the battery.
Safety Voltage: If this voltage is reached and cannot be reduced charge is terminated.
Finish Current: Depending on the battery type, this current is the current the charge is terminated on or the current used to finish the charge.
Time Post Gassing: This is the maximum time allowed after reaching the hold voltage.

Product Features

Micro-processor controlled and fully automatic
Electrical Stability System (ESS™) technology turns ESS6008MSK into a 70A stable power supply for extended service procedures or re‐flashes. Nominal 13.7V DC Output
Memory Saver Mode 15A Continuous/20A Peak
Program for deep discharge recovery of flooded batteries
Patented diagnostics indicate weak or defective batteries
Charges all types of 12 volt batteries
Designed for AGM, Gel Cell, Sealed, and Standard Flooded batteries including Spiral Cell, Orbital™, or Optima™ batteries
Dead Battery Override control
"Safe In Any Weather" Operation
Reverse polarity protected
5 Amp 12’ Straight Cable with OBDII Connector – Male Cigarette Plug
Terminal Covers to prevent positive battery clamp from arcing (pair)
UL Listed
MADE IN USA

Charger Specifications:

Model Number: IBC6008MSK
DC Output: 60 Amps / 70 Amps in Power Supply Mode, 15Amp Continuous /20 Amp Peak Memory Saver Port
DC Leads: 6 ½’ 4 AWG
Clamp Rating: 400A
Boost Rating: 270A
AC Cord / Voltage: 6’ 16‐3 / 120VAC 60 Hz
Memory Saver Cord: 5 Amp (Straight) 12’ w/OBDII Connector
Battery Terminal Covers: Pair Red ‐ Associated
Battery Types: 12 Volt Flooded, AGM, and Gel Cell batteries ‐ including Spiral Cell, Orbital™, or Optima™ batteries
Display: Analog Meter and 3 LED display indicating charge status
Limited Warranty: 5 Years
Shipping Dimensions: 17”x16”30”
Weight: 50 LBS

Browse for more products in the same category as this item: