026-80002-00 Mahle Filter Acid Older 750 750X 751 760 Units

The RTI 026-80044-00 filter is the replacement filter for thousands of RRC750 and RRC760 Refrigerant Management Centers in the field.

RTI/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.

RTI/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.

026-80128-00 Mahle Filter ID1000 And ID2000 Refrigerant Identifiers for protection from oil and debris.

RTI Inlet filter for R-12 units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. See 360-81618-00 10 Pack Replacement Elements.

RTI Inlet filter for R-134a units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. See 3608161800 10 Pack Element. See 360-81618-00 10 Pack Replacement Elements.

RTI Inlet filter for R-12 units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. See 360-81618-00 10 Pack Replacement Elements.

026-80776-00 Mahle Filter Kit For ACX1120H ACX1150 And ACX1150H

028-80506-00 Mahle ID Sample Hose With Restrictor

1/4" Flare Filter for ProMax and MiniMax Units Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting.

100345 PROMAX Hose, Blue, 4" Long

Contains one quick change filter-drier to be used on both R-12 and R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil. For early models using 34430 Filter-Drier (17700A, 34700, 34300-2K). See your instruction manual if you have questions about which filter-drier to use.

Keep recovery and recycling units operating at peak efficiency with a convenient maintenance kit. Contains one quick change filter-drier to be used on either R-12 or R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil.  Designed for newer units manufactured after 1998.

Identifier Filter For RI2004DX, 16900, 16910, 342000, ACR2000, ACR2005. When the element shows red any where in its body its time to replace it.

Recycling Filter Drier Core Features low pressure drop with maximum moisture and acid retention. Hermetically sealed cans prevent exposure to dirt and moisture.

Designed to protect recevery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting.

Coalescent Filter Element For 17580

Activated Carbon Filter Element For 17580 limits emissions and odors during flushing and purging.

Solvent Filter

Robinair RO17623 Replacement Filter Kit For Robinair 17622 Recycle Guard Sealant Removal Filter

Solvent Filter

RO17641 Recycle Guard Hose Install Kit For R-12 and R-134A Installs. Comes Complete with hoses and fittings for Installation of a RO17622 RecycleGuard Filter.
Discontinued See the following part numbers
For R-134A Installation 1) RO19078 36" ACME Hose 1) MSC80296 1/8" MPT X 1/2" ACME Adapter
For R-12 / Other Gases 1) RO31036 36" Flare Hose 1) MSC90296 1/8" MPT X 1/4" Flare Adapter

19740 Source Tank Filter For 134A units. Protect your investment from debris and harmful elements from tank manufacturing processes. Metal debris can foul solenoids causing unnecessary repairs and equipment failures. Install this filter on the hose end of your tank add hose to protect your machine. 100 mesh screen is replaceable or cleanable. 1/2" Female ACME X 1/2" Male ACME fittings Installs inline of tank fill hose.

The 19776 filter-drier has been specifically formulated using XH9 drier desicant to trap acid and particulates and is formulated to remove water from the refrigerant. You must change the filter-drier to assure adequate moisture and contaminant removal.

Filter/dryer is used on Several A/C service units, such as early EEAC313 models including. This is the filter/dryer that should be changed regularly depending on usage of unit. Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/2" ACME fittings are standard.

The Robinair 34379 filter-drier has been specifically formulated using XH9 drier desicant to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters. You must regularly change the 34379 filter-drier to assure adequate moisture and contaminant removal. Typically, you can recycle up to 150 pounds of R-134a refrigerant between filter changes.

The Robinair 34430 filter-drier has been specifically formulated using XH9 drier desiccant to trap acid and particulates and is formulated to remove water from the refrigerant. You must regularly change the 34430 filter-drier to assure adequate moisture and contaminant removal.

The 34724 Robinair filter drier has been specifically formulated to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters. You must change the filter-drier to assure adequate moisture and contaminant removal. Typically, you can recycle up to 300 pounds (136 kilograms) of R-134a or 600 pounds (272 kilograms) of refrigerant between filter changes (depending on your model). To help you know when you’ve reached that point, the unit displays the warning message prompting you to change the filter drier.

360-81244-00 Mahle Kit Service Filters 026-80069-00 & 026-80077-00. RT/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.

Inlet filter for R-134a units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable.

360-82029-00 RTI Maintenance Kit for RHS780/RHS730V Machines. Includes filter 026-80069-00 & 026-80077-00.

360-82031-00 RTI Maintenance Kit for RHS730E Machines

360-82032-00 RTI Maintenance Kit for RHS680. Includes 026-80069-00 Filter 026-80077-00 Filter, 360-80359-00 Hose Gaskets & Depressors, 360-80672-00 O-ring kit for hoses and couplers, Hose filter screens. Quart of compressor oil.

Includes all needed items to perform basic maintenance on your RHS980. RTI Filters need to be replaced every 150 pounds of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier when notified by machine to assure adequate moisture and contaminant removal as well as prevent lockout at 150 lbs of use.

Includes all needed items to perform maintenance on your RHS980& Navistar Units. RTI Filters need to be replaced every 150 pounds of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier when notified by machine to assure adequate moisture and contaminant removal as well as prevent lockout at 150 lbs of use.

360-82733-00 Mahle Calibration Kit All Load Cells

360-82739-00 Mahle Maintenance Combo Filter for ACX1280 and ACX1285

360-82740-00 Mahle Service Kit. Includes Vacuum Pump Oil, O-Rings, In-Line Filter, Id Filter, For ACX1280

The 360-82958-00 Mahle Sample Filter R1234yf Refrigerant Identifier provides protection from oil and debris.

360-83106-00 Mahle ACX Service & Calibration Kit ACX1120 ACX1150 ACX1150H. Includes Scale support bracket, scale weight bracket, hex key, calibrated test weights for injectors, tube wrench, test pressure gauge and fittings for 134A units. Requires 360-81282-00 10Kg Calibration Weight Kit. Packaged in a carry case for easy storage.

360-83142-00 Mahle Kit Replace Combo Filter R134A Us 16Dig ACX1185Mfg Only

360-83159-00 Mahle Kit Consumables Rhs1280/ACX1280

The 38003 filter-drier has been specifically formulated to trap acid and particulates and is formulated to remove water from the refrigerant.

The 38080 Ritchie Yellow Jacket TRAP™ Sealant Filter System (1/2 ACME Automotive Fittings) removes sealant, dye, lubricant, and other contaminants from refrigerant prior to entering the recovery unit. Protect your investment with this inexpensive easy to use filtration solution. The A/C System Sealant Remover is used with virtually any recover, recycle, and recharge units that have external or internal manifold pressure gauges.

Replacement filter cartridge for the 38080 Ritchie Yellow Jacket TRAP™ Sealant Filter System. The 38080 Ritchie Yellow Jacket TRAP™ Sealant Filter System removes sealant, dye, lubricant, and other contaminants from refrigerant prior to entering the recovery unit. Protect your investment with this inexpensive easy to use filtration solution. The A/C System Sealant Remover is used with virtually any recover, recycle, and recharge units that have external or internal manifold pressure gauges.

The 38087 Ritchie Yellow Jacket TRAP™ Sealant Filter System (1/4" Flare Fittings) removes sealant, dye, lubricant, and other contaminants from refrigerant prior to entering the recovery unit. Protect your investment with this inexpensive easy to use filtration solution. The A/C System Sealant Remover is used with virtually any recover, recycle, and recharge units that have external or internal manifold pressure gauges. This rugged filter cartridge connects in-line between a system and any A/C service equipment to protect refrigerant supply, recovery system and oil separators.

The 38139 Ritchie Yellow Jacket Dual TRAP™ Sealant Filter System (1/2 ACME Automotive Fittings) removes sealant, dye, lubricant, and other contaminants from refrigerant prior to entering the recovery unit. Protect your investment with this inexpensive easy to use filtration solution. The A/C System Sealant Remover is used with virtually any recover, recycle, and recharge units that have external or internal manifold pressure gauges.

557648 Robinair 34724 Filter O-Ring Small

557649 Robinair 34724 Filter O-Ring Large

Identifier Filter For Neutronics Identifiers. When the element shows red any where in its body its time to replace it.

69788-FLTRPK Mastercool Filter Pack For 69788 69789 Series Recovery Units

Reclaim Equipment Filter. 10" Total Length, 3/8" x 3/8" Flare Fittings Inlet & Outlet.: A/C reclaim / recycle equipment replacement filter.

6992 FJC Inc. Reclaim Equipment Filter 10" Total Length. 1/2" Flare Inlet & Outlet.: A/C reclaim / recycle equipment replacement filter.

ARXF CPS AR212TR 300 400 Filter Drier Core. 42 Cu In. Same as Four Seasons Part # 59872, White Industries Part # 16200-SP

ARXF2 CPS Filter Drier w/Moisture Indicator

ARXF5 CPS Filter Drier. Cartridge type 41 inch cubic filter drier. 1/4 SAE fittings.

Eliminate the extra inlet hose to your recovery unit with this handy filter, it screws directly on the 1/4" flare inlet fitting of the unit so you never lose it. Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" male flare inlet fitting and 1/4" female flare outlet fittings.

Eliminate the extra inlet hose to your recovery unit with this handy filter, it screws directly on the 1/4" flare inlet fitting of the unit so you never lose it. Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" male flare inlet fitting and 1/4" female flare outlet fittings.

Eliminate the extra inlet hose to your recovery unit with this handy filter, it screws directly on the 1/4" flare inlet fitting of the unit so you never lose it. Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" female flare inlet fitting and 1/4" male flare outlet fittings.

Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" Male Flare fittings.

Eliminate the extra inlet hose to your recovery unit with this handy filter, it screws directly on the 1/4" flare inlet fitting of the unit so you never lose it. Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" male flare inlet fitting and 1/4" female flare outlet fittings.

C053 Sporlan Catch-All Recovery Inlet Filter 3/8 Male Flare Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 3/8" Male Flare fittings.

Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large 8 Cubic Inch filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 1/4" Male Flare fittings.

Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large 8 Cubic Inch filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 3/8" Male Flare fittings.

Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large 41 Cubic Inch filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting. 3/8" Male Flare fittings.

6 Replacement Suction Filters & 1 Inlet Fitting for CPS Recovery Units

Features low pressure drop with maximum moisture and acid retention. Hermetically sealed Pouch prevent exposure to dirt and moisture. 42 cu.-in. cores can be used in most 3 1/2" O.D. flanged shells. 1.58" I.D., 3.12" O.D., 6" length. Higher moisture and acid capacity for systems with excessive moisture due to leaks or ruptures. Universal replacement cores for use in our shells and all other take-apart type filter-drier shells. D-42 filters include one neoprene composite lid gasket and one core gasket.

FLCK-1 PROMAX Filter Conversion Kit (Replaces MF1275 Swivel). Allows for use of common Filter Drier. Includes: 100343 Filter Drier, 100345 Blue 4" Hose, Flare Adapter Fitting, 1/4 seal cap with retaining strap.

FX3030X1 CPS FX Series Maintenance Kit. - Includes ARXF5 Filter Drier (ARXF5), Quart of Vacuum Pump Oil (VPOQ12) and Coupler O'Rings (QCXR34 & QCXR1234) for R-134a & HFO Premium Couplers.

OPEB6S CPS eBOOST™ AC/R Performance Enhancer is a professional grade chemical tool that contains concentrated synthetic catalysts and high quality lubricating agents to allow AC/R systems to operate at maximum efficiency. eBOOST™ AC/R Performance Enhancer also enables refrigerants to evaporate at lower temperatures, which allows systems to draw more heat from the air. This lowers the coil temperature which delivers colder vent air. Also, the added lubricating agents increase compressor oil effectiveness, which reduces friction and allows compressors to run cooler, quieter, longer. Boosts cold air output for a cooler, quieter, longer running compressor. Restores older AC/R systems to original efficiencies. Improves heat coil transfer. Increases cooling capacity. Increases lubricity of compressor oil. Reduces compressor friction, vibration and noise. Treats up to 6 tons. Safe and effective for all systems.

eBOOST™ AC/R Acid Neutralizer is a professional chemical tool that actively locates and neutralizes acids in AC/R systems caused by moisture, compressor burnout and lubricant/refrigerant gas breakdown. Prevents the formation of acid and for use in systems that are showing signs of acid build up. Fast and immediate results  and is safe and effective for all systems. Treats up to 6 ton systems. Includes application hose for 1/4" & 5/16" Flare fittings.

OPEBAK eBOOST™ AC/R Acid Detection Kit is a fast, easy and reliable way to determine the relative pH of any lubricant used in air-conditioning or refrigeration compressors. Ideal for facilitating regular, preventative maintenance. Accurate results in seconds, a simple color change shows results. Works with all lubricants (mineral oil, ABZ, PAG, POE, PAO). Biodegradable,non-flammable,non-hazardous non-toxic. Enough for 4 tests, Packaged in sealed trilingual (English, French and Spanish) clamshell with hang tab, color insert card and instructions.

OPEBF6S CPS eBOOST™ AC/R Refrigeration System De-Icer is a professional chemical tool to quickly resolve frozen AC/R or refrigeration systems. Its advanced chemistry instantly binds to moisture molecules trapped in refrigerant gases preventing the molecules from entering or remaining in a frozen state. eBOOST AC/R De-Icer also neutralizes acids and stabilizes compressor lubricants. Resolves frozen AC/R system issues. Compatible with all refrigerant gases (including CFC, HFC and HCFC). Will not affect performance of refrigerant gas or expansion valve performance. Neutralizes and prevents formation of acids, Treats up to 6 tons. Safe and effective for all systems.

eBOOST™ AC/R Moisture Remover is a dehydrating additive that eliminates moisture and prevents water molecules from forming in AC/R systems. Safe for all systems and compatible with all AB, mineral, POE and PAG oils. Will not break down or leave behind any type of particulate matter, acids, gels or polymers. Eliminates system moisture, Compatible with lubricants and all refrigerant gases – including CFC, HFC and HCFC, Treats up to 6 tons. Safe and effective for all systems, Does not contain methanol or solid particles.

Differential pressure indicator for monitoring filter pressure drop. A 1-inch diameter dial with a simple red/green arc is standard to indicate normal operation and alarm conditions. Replace filters when the needle is in the red zone during recycle for proper operation.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RIXF CPS Refrigerant Identifier Filter provides protection from oil and debris.

RIXFR CPS Refrigerant Identifier Restrictor

NOW WITH 3 RT752C (Until further notice, This item no longer includes
the part numbers RT750A & RT751M these are replaced with RT752C)
The Checkmate method is the Industries only valid field test for measuring levels in both the Compressor Oil and any Refrigerant Gas. Quick! Easy to Use. Simply insert a Detector Tube into the Checkmate body and connect the device up to a cylinder or on the low side of system. Detector Tubes results take less than a minute. Accurate Results. The Detector Tubes have been tested for accuracy by ETL, Intertek Testing Services, an ARI approved laboratory.

One 1/4'' female flare to 3/8'' male flare brass adapters made in the USA using the highest level of brass consisting of 65% copper and 35% zinc which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.