Premium Jack Oil (Quart)

HW93294 Hein-Werner Automotive Premium Jack Oil (Gallon)

The HW93776 Hein-Werner Automotive 3-Ton Engine Stand can be configured for virtually any large capacity block including Cummins, Mack Diesel, Caterpillar, Detroit, International Diesel, Allison Transmissions and even Small Vehicles. Features include a Clearance in 360° rotation. A Long handle provides easy engine rotation with 95 to 1 gear. Floor lock keeps stand from moving during repairs. Universal adapter included for use with a wide variety of optional adapters

HW93776-1 Hein-Werner Adapter Plate For Cummins Engine (For HW93776)

HW93776-2 Hein-Werner Adapter Plate For Detroit Engine (For HW93776)

HW93776-3 Hein-Werner Adapter Plate For Mack Engine (For HW93776)

HW93776-4 Hein-Werner Adapter Plate For International Engine (For HW93776)

HW93776-5 Hein-Werner Adapter Plate For Caterpillar Engine (For HW93776)

HW93776-6 Hein-Werner Adapter Plate For Allison Engine (For HW93776)

HW93776-7 Hein-Werner Small Vehicle Engine Stand Adapter

HW93778 Hein-Werner 5/8 Ton Engine Stand

30750 Omega 750 Lbs Engine Stand - H Type: Constructed from heavy-gauge welded square tubular steel with an extra long handle and a rubber grip for ease in rotation and manipulation. Head plate has a full 360 degree rotation with eight locking positions.

31256 Omega 1250 Lbs Rotating Head And Folding Engine Stand: Constructed from heavy-gauge welded square tubular steel with an extra long handle and a rubber grip for ease in rotation and manipulation. With the added convenience of adjustable legs.

44700 Omega 700Lbs Engine Transverse Bar With Arm: Adjustable from 38" to 61" width, two 14" adjustable hook screws, two 38" braided steel cables 1/8" in diameter.

OTC 1750A 6000 lb. Revolver Diesel Engine Stand - 96 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position. Includes 205061 universal mounting plate for use with individual engine adapter plates.

Basic Tooling Set - This is the basic tooling set for servicing center and end beam bushings. It does not include the hydraulic pump or gauge. If you are already equipped with hydraulics, you can be replacing bushings right away! (Does not include tooling for hanger tube or end plug adapter removal.) 1740 tooling setup for end bushing installation. For 340 thru 450 Series Hendrickson Suspensions.

Hendrickson Service Set with Hydraulics (hydraulic pump 4062) - The method Hendrickson recommends for suspension service. You get the No. 1740 basic set, plus OTC’s No. 4062 two-stage electric/hydraulic pump with remote hand switch, a No. 9653 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.

Hendrickson Service Set with Hydraulics (hydraulic pump 4031)- The preferred method for servicing center and end beam bushings. You get the complete No. 1740 basic set, plus OTC’s No. 4031 two-stage electric/hydraulic pump with remote hand switch, a No. 9654 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.

End Bushing Adapter Puller Set - Set contains everything needed to remove end bushing adapter plugs in 380 thru 440 series suspensions. The plugs have to be removed prior to end bushing replacement. The set is complete in a handy plastic case. For use with 1740 series tooling sets (order separately).

End Bushing Adapter Puller Set

Hendrickson Fabricated Bar Pin Adapter Set - Servicing bar pin end bushings used on Hendrickson equalizing beam tandem truck suspensions requires the use of special tooling.

1763 OTC Hendrickson Center and End Bushing Service Set - This set is required for bushing service on 500 and 700 series heavy-duty suspensions. It is intended for use with a 100-ton capacity shop press. It allows replacement of center and end bushings. For 500 & 700 series suspensions. Use with a shop press.

Hendrickson PRIMAXX® Quick Alignment Socket - Used to adjust axle alignment on the Primaax air suspension systems. Works on Primaax models 230, 460, and 690 rear suspensions. Hendrickson has issued their approval of this tool.

Hendrickson Primaax® Quick Alignment Socket Wrench - Used to torque cross tube end cap bolts and longitudinal torque rod top pad bolts. Reduces maintenance time by eliminating the need to remove the tires to gain access to the end cap bolt. Hendrickson has issued their approval of this tool.

OTC 205058 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. For Detroit Diesel engines: 53 series in-line 6-cylinder, 6V & 8V; 71 series in-line 6-cylinder, 6V, 8V, & 12V; 92 series 6V & 8V; 8.2 liter V-8. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 205059 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Cummins engines: All NH, NTC, NTE, N14 855 series in-line 6 cyl.; 378 series V6; 504, 555, and 903 series V8; KT 1150 series in-line 6 cyl., L10. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 205060 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Caterpillar engines: Nos. 1673, 1674, 1693, 3306, and 3406 in-line 6 cyl.; Nos. 1100, 3208, 3408 V8 and 3406E. Mounting plate includes all the necessary hardware and an engine application chart.

Universal Adapter - Required for mounting engine adapter plates to the 1750A and 1750 Engine Stands.

OTC 205101 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: All 672, 673, 675, & 711 series in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.

Puller Attachment

OTC 206386 International Harvester / Ford Engine Adapter Mounting Plate - International Harvester / Ford Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For International Harvester engines: DT-466, DT-360, DT408, and 530 in-line 6 cylinder; DV-550, MV-404, MV-446, V304, V345, V392, 4-152, 4-196, 4-194; 9.0 liter and T444E V8. Ford 6.9L, and 7.3L DIT. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 206629 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: V8 1000, E6, & E7 in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.

Spacer Ring

OTC 208160 Detroit Allison Transmission Mounting Plate - Detroit Allison Transmission Mounting Plates for 1750A and 1750 diesel engine stands. Allison transmission mounting plate for transmission Nos. AT500, MT600, MT 6-speed, VH, VS, and V730. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 217687 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 217687 – For Caterpillar 3114, 3116, and 3176 in-line 6 cyl. and C12 engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218098 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218098 – For Cummins "B" series 5.9L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218099 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218099 – For Cummins "C" series 8.3L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 218174 Flywheel Handling Attachment - Flywheel handling attachment for use on OTC 5015 only.

OTC 218504 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. No. 218504 – For Detroit series 60 in-line 6-cylinder engines. Mounting plate includes all the necessary hardware and an engine application chart.

Oil Drip Pan For Engine Stand 28 x 18.5 x 4.13 inches. For use on engine stands for T or I shaped bases. Plastic pan bradles base and collects fluid drippings from engine assemblies. Fits over base frame of Sunnex 8300G geared engine stand. Easily removed for emptying. Ideal when working on engines to keep oil and grease off the shop floor. Made of ABS plastic.