Red / Black Cables & Clamps, 4 GA Heavy Duty Cables, 54" Long For Easy Access, Industrial grade Hot JawTM clamps.

Red / Black Cables & Clamps, 4 GA Heavy Duty Cables, 23" Long For Easy Access, Industrial grade Hot JawTM clamps.

238-529-000 Positive Cable Clamp Assembly 4 GA 23"

238-530-000 Negative Cable Clamp Assembly 4 GA 23"

246-416-666 12 Volt 20 Amp Circuit Breaker

246-417-666 Cigarette Lighter Socket With Cap

Clamps Positive & Negative. Screw Type Connection for ring terminal cables to anchor wire for solderless connection. Dual Hot Jaws for better power distribution. Includes Phillips anchor screws. Does not include hardware for cables, (ring terminals, solder etc...).

Black Negative Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

Red Positive Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

312-001-666 Holster Kit Black (ES5000/ES1224)

312-002-666 HOLSTER KIT GREY (ES2500/ES6000/ES8000)

312-003-666 Holster Kit Red (ES2500/ES6000/ES8000). Discontinued See 312-271-000, 312-272-000

312-253-000 Plastic Switch Cap

312-257-000 CAP (POSITIVE) & HOLSTER, GREY

312-258-000 CAP (NEGATIVE) & HOLSTER, GREY

312-272-000 CAP (NEGATIVE) & HOLSTER, RED

Replacement Grey Case Universal Fit, Includes Front And Rear Labels, 4 Screws, Cigarette Lighter Jack, Cap And Mounting Ring. There are no stickers or labels for the covers available. Fits Models: ES2500, ES5000, J850, J900, Jumper 850, MS2500K Matco, OUTPAC 900, YA1213A Snap-On.

Replacement Black Case Universal Fit. Does not include hardware or labels. There are no stickers or labels available for the covers.

312-277-000 Cap For Circuit Board Test Switch

312-278-000 CAP (POSITIVE) & HOLSTER, BLACK

12 Volt Charging Circuit Board With Battery Leads, Push Button, Test Switch. Applies to units with cigar lighter jack style charging jack. (Part Number Can Be Found On Board). Use cation when choosing a replacement circuit board for your unit. Always compare the board in your unit with the board being displayed here; do not guess, as there are no returns on electrical components and circuit boards.

865-865-666 Circuit Board With Battery Leads. For use with Pin Style Jack Units. Use cation when choosing a replacement circuit board for your unit. Always compare the board in your unit with the board being displayed here; do not guess, as there are no returns on electrical components and circuit boards.

865-970-666 Circuit Board With Battery Leads & Switch (Pin Jack New Style). (Part Number Can Be Found On Board). Use cation when choosing a replacement circuit board for your unit. Always compare the board in your unit with the board being displayed here; do not guess, as there are no returns on electrical components and circuit boards.

Replacement Battery For ES2500, ES4000, J900, JUMPER1000, JUMPER 850, OUTPAC. Replacement 12 Volt Battery. Peak amp rating of 900 amps, Sealed Lead Acid (AGM) 17 Amp Hour Rating. Dimensions L 7.13 x W 2.99 x H 6.57 (aprox.). Can be used in universal applications. Replaces several OEM batteries.

ES1230 12 Volt 22 Amp Hr Replacement Battery For ES5000 & ESP5500 Sealed Lead Acid (AGM) 22 Amp Hour Rating and 1500 Peak Amp.

Easy to use and lightweight, it is the ideal entry level professional jump starter, jumps up to 5 vehicles on a single charge

ESA1 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 48" adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements.

ESA214 Charger With Small Jack (ES2500 - ES2500C New Style)

Wall Charger with pin type jack. For most units produced after 1999 with auto charging boards.

Clore Automotive introduces the SOLAR ESA30 OBD II Memory Saver Connector, a memory saver connector that can be used in conjunction with a jump starter to preserve vehicle codes and electronic presets while a vehicle’s battery is disconnected. The ESA30 can be used on any jump starter with a 12 Volt power port. The ESA30 acts as an interface connector between a jump starter and a vehicle’s OBD II port. This prevents any electronic memory loss when disconnecting a vehicle’s battery. A proper connection is confirmed by the ESA30’s built-in LED light.

ESA5 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 15' adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump-pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements. We also have one in a 6ft. length here.

Portable Power Source User's Manual. This Operators manual provides specific information for your model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your Booster Pac.

Portable Power Source User's Manual. This Operators manual provides specific information for your model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your Booster Pac. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.