15071 Titan Dent Puller Suction Cup

15090 Titan Heavy Duty Suction Cup

AES 230 Spotweld Cutter and Arbor - This spot weld cutter has a 3/8” double-ended blade with a 1/4" arbor with retractable pilot. Creates better panel separations than using a panel cutter. Blades inter-change with other spot weld arbors.

15078 Titan Flexible Sander

19952 Titan 5in x 2-3/4in Flexible Sanding Block: This sanding block has been constructed of tough polyurethane that is also soft and pliable and can be utilized on both flat and contoured surfaces.

Replacement stud welding tip. Fits 9000 Deluxe Welder, 5500 Stinger Plus and5050 Stinger.

If you have been using a torch and wet rag to do your sheetmetal shrinking, you should try this shrink tip on your Uni-Spotter stud welder. Many autobdy men prefer this method over the traditional torch.

15077 Titan Regular Dent Puller

Handy Bar

15075 Titan 10in 3 Position File Holder. 3-position file holder. 10" flat blade. Planes, shapes, files and shaves. 10 in. Shaper File Blades come either 15088 rounded profile or 15072 flat profile.

1001 H & S Autoshot 2.2mm Flexpert Welding Stud - 500 Per Box. Flexpert 2.2 mm, for regular sheet metal damage. Special 5 process alloy for super flexibility. For hard to reach areas and compound pulls. 500lbs. fusion strength, with 1500 lbs. tensile strength.

1002 H & S Autoshot Heavyweight Welding Stud - 500 Per Box Heavyweight 2.6 mm, the heaviest stud available. Specially designed for heavy-hit areas. Ideal for rockers, rails and door posts. 500 lbs. fusion strength and 200 lbs. tensile strength.

Mold rivets are an alternative to conventional rivets for applying vehicle moldings and window channels.

Steck 21825 Bushing Tool - Have you ever tried removing a door hinge bushing with just a regular punch? You know it's a hassle. Now there's the Steck Bushing Tool. Its special design makes it easy to punch out bushings, and helps to align bushings when reinstalling.

J20014 Motor Guard 2.0mm Magna-Spot Draw Pins - Bag Of 500

Motor Guard J20007 Pin Electrode for Magna-Spot Stud Welders - Holds all standard sized pins.

11511 LACO BLOC-IT Heat Absorbing Paste - LACO Bloc-It Heat Absorbing Paste. Heavy paste effectively absorbs surface heat and protects adjoining surfaces that may be damaged by excessive heat. Typically used to protect rubber, plastic, distortion, painted, and finished surfaces during soldering, brazing, or welding.

J20015 Motor Guard 2.5mm Magna-Spot Draw Pins - Bag Of 500

J20006 Motor Guard Shrink Electrode For Fast Heat Magna-Spot Stud Welders

19951 Titan 17in x 2-3/4in Flexible Sanding Block: This sanding block has more of a plane look and handles. It has been constructed of tough polyurethane that is also soft and pliable and can be utilized on both flat and contoured surfaces.

UNI1005 H & S Autoshot Stud Welder Mold Rivet Tip. Replacement stud welding tip. Fits 9000 Deluxe Welder, 5500 Stinger Plus and5050 Stinger.

OTC 9797 3/8" Ram Half Metal Dust Cap

UNI5015 H & S Autoshot JR. SWITCH

Keysco Tools 77776 3/8" Spot Weld Cutter - This 3/8" Keysco cutter can be used in either an electric or pneumatic drill. Operates at speeds up to 2000 rpm. Leaves a clean hole that requires very little grinding. Self-centering point minimizes walking, will not require a punch. Solid 1-piece construction will not break or snap. Made in the USA.

Slide Hammer - Pulling Hook - This slide hammer puller attachment is used in oil seal and bearing in situations where conventional methods will not work. Designed to be used with OTC No. 1155 (5 lb) or 1156 (2-1/2 lb) slide hammer, or other slide hammers having 5/8-18 threads.

Keysco Tools 77775 5/16" Spot Weld Cutter - This 5/16" Keysco cutter can be used in either an electric or pneumatic drill. Operates at speeds up to 2000 rpm. Leaves a clean hole that requires very little grinding. Self-centering point minimizes walking, will not require a punch. Solid 1-piece construction will not break or snap. Made in the USA.

UNI2100 H & S Autoshot UNI-WIRE, 1/2 LB BOX

UNI7555 H & S Autoshot 5PK SM PULL KNOBS CONVEX FACE

UNI7550 H & S Autoshot 5PK SM PULL KNOBS FLAT FACE

Kit includes collet (jaws), o-ring, and spring for servicing you Uni-Puller.

UNI2101 H & S Autoshot UNI-WIRE, 1 LB. BOX

The Original Pull Rod Set

OTC 9799 Hose Half Coupler Metal Dust Cap only

Heavy Strength Glue 1/2 Lb

Unique design securely grips and releases stud with quick-release cam.

UNI2130 H & S Autoshot CONVERSION KIT

Handle

OTC 9798 Hose Half Coupler Only (3/8")

Pogo II

2 pc. Inflatable Dent Remover

SPOT WELD CUTTER REPLACEMENT BITS

OTC 898A Body And Fender Dent Puller -  Often, the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out.

Motor Guard J20017 Magna T-Puller

Replacement Chain For 77175

OTC 9636 Hydraulic Oil 1 Quart - Ensure dependable performance of rams and pumps by using this high-grade, specially prepared oil. Contains foam suppressant additives; high viscosity index.

OTC 9796 Ram Half Coupler with Dust Cap - Precision built and designed for high pressure. Permits disconnecting hose without loss of oil. For GM Ford Chrysler Toyota Nissan VW Mack Navistar and John Deere.

OTC 9617 Manifold Block - For use when a multiple-ram system is required. This unit has six 3/8" NPTF ports.

UNI4516 H & S Autoshot POSI-CAM SLIDEHAMMER COMPLETE

OTC 4485 Spot Weld Cutter Set - Use with an electric drill or air drill to cut 5/16" and 3/8" spot welds. Cutter bits have cutting teeth on each end.

Uni-Clamp allows you to pull 2 to 11 studs progressively with body frame equipment or even a come-along. Studs can be pulled progressively, giving a flatter finished pull. Make pulls you never though possible! Uni-Clamp multiple stud puller Parts: 1081 - screws only, pkg of 8 1082 - screw wrench only

OTC 9795 Completer Quick Coupler (3/8") - Precision built and designed for high pressure 10,000 PSI. Permits disconnecting hose without loss of oil. For GM Ford Chrysler Toyota Nissan VW Mack Navistar and John Deere.

Heavy-duty T-handle slide hammer provides maximum control. 4-jaw collet designed to grip studs and not slip.

OTC 9637 Hydraulic Oil 1 Gallon - Ensure dependable performance of rams and pumps by using this high-grade, specially prepared oil. Contains foam suppressant additives; high viscosity index.

OTC 9767 6' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 9766 3-1/4' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 9654 Pressure Gauge - This gauge has one scale (0 - 6,000 PSI), 3-1/2" face, and it is a dry gauge (not liquid filled).

OTC 9652 Pressure and Tonnage Gauge - This gauge has four scales, 3-1/2" face, and it is a dry gauge (not liquid filled).

OTC 9654 Pressure Gauge - This gauge has two scales, 2-1/2" face, and it is a dry gauge (not liquid filled).

OTC 9653 Pressure Gauge - This gauge has two scales, 3-1/2" face, and it is a dry gauge (not liquid filled).

OTC 9768 8' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

Motor Guard J20016 Magna Clamp

MOTJ20003 Motor Guard SLIDE HAMMER

OTC 9575 Shut-Off Needle Valve - This valve is used for fine metering. You can use several for controlling multiple single-acting rams simultaneously, yet independent of one another. This unit has 3/8" NPT ports.

OTC 9770 12' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 9650 Pressure and Tonnage Gauge - This gauge has four scales, 3-1/2" face, and is a dry gauge (not liquid filled).

OTC 9769 10' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

STUD EASE Technology holds stud in welder for easy out-of-position welding and is exclusive to UNI-SPOTTER Stud Welders

OTC 9651 Pressure and Tonnage Gauge - This gauge has four scales, 3-1/2" face, and it is a dry gauge (not liquid filled).

Affordable - a fraction of the price of current PDR sets. Easy to master – training DVD included. Stainless steel solid rod construction with EDM lockable swivel tips. A breakthrough in PDR technology. Thirteen interchangeable stainless and plastic tips - swivel head action. Replaces hundred plus obsolete PDR tools. Magnetic reflector board included. Add PDR profit center to any automotive repair center. You don’t have to be an auto body man to do PDR.

OTC 9658 Pressure Gauge - This gauge is liquid filled to dampen vibration and fluid pulsation, it has two scales and a 2-1/2" diameter face. Can be used with any OTC pump or ram.

OTC 9659 Pressure Gauge - This gauge is liquid filled to dampen vibration and fluid pulsation, it has two scales and a 3-1/2" diameter face. Can be used with any OTC pump or ram.

OTC 9780 6' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 9781 10' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 9782 20' Hydraulic Hose (1/4" Id 3/8" NPT) -  Lightweight, rugged hose choose from 1/4" I.D. or 3/8" I.D. high flow hose. All have 3/8" NPTF ends. Operating pressure is 10,000 PSI. Hoses comply with MHI Std. IJ100.

OTC 4108A 5-Ton Single-Acting, Spring Return Ram - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

OTC 4104A 10-Ton Single-Acting, Spring
Return Ram - Available in capacities of 5 to 100 tons and for maximum
working pressures up to 10,000 PSI; 2 to 1 safety factor on material
yield; designed and tested to meet ANSI B30.1. Standard stroke lengths
of 5/8" to 14-1/4", these compact rams require a minimum of mounting
space.

OTC 4103A 10-Ton Single-Acting, Spring Return Ram with 2-1/8" Stroke - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

OTC 4101A 5-Ton Single-Acting, Spring Return Ram - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

4100A OTC 5 Ton Ram With Half Coupler 3" Stroke - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

OTC 4141A 10-Ton "Shorty" Rams, Single-Acting, Spring Return - Forcing a gravity return ram to retract wastes both time and money. This OTC series of single-acting, spring-return rams eliminates that waiting. With their low collapsed height and the stroke you really need, these rams are ideal for a variety of applications.

4105A OTC 10 Ton Ram With Half Coupler 10-1/8" Stroke - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space. Several of the rams feature threaded ram collars and internal base threads to simplify mounting.

OTC 9596 Load Lowering Valve - This load lowering valve has 3/8" NPTF ports and a maximum operating pressure of 10,000 PSI.

OTC 9582 2-Position, 3-Way Control Valve - With a lever operated, detent positioned valve for use with single-acting rams. The two positions are; Advance and Hold.

OTC 4143A 30-Ton "Shorty" Rams, Single-Acting, Spring Return - Forcing a gravity return ram to retract wastes both time and money. This OTC series of single-acting, spring-return rams eliminates that waiting. With their low collapsed height and the stroke you really need, these rams are ideal for a variety of applications

OTC 4106A 25-Ton Single-Acting, Spring Return Ram - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

OTC 4131A 10-Ton Spring-Return Hollow Center Hydraulic Ram - Ideal for push/pull applications found in off-highway, construction, mining, and other industries where heavy equipment is maintained. Center hole permits extending screws, cables, etc., straight through the ram for versatility of application.

OTC 4144A 50-Ton "Shorty" Rams, Single-Acting, Spring Return - Forcing a gravity return ram to retract wastes both time and money. This OTC series of single-acting, spring-return rams eliminates that waiting. With their low collapsed height and the stroke you really need, these rams are ideal for a variety of applications.

OTC 9625 Pressure Switch - This pressure switch has 1/4" NPTF external thread.

OTC 4169 10-Ton Hydraulic Push-Type Ram and Pump Set - Compact and lightweight, these ram and pump sets are ideal for use in a wide variety of lifting and pushing applications. They feature a single-acting ram with a single-speed hydraulic hand pump. Requiring a minimum of mounting space, their remote operation is facilitated by a 6-foot, high-pressure hose.

OTC 4200 Nozlrater Diesel Injector Nozzle Tester - Here is the ultimate tool for diagnosing a number of problems that affect diesel fuel injector nozzles. The Nozlrater tester enables you to check for leakage, pop-off pressure, spray pattern, and chatter.

4107A OTC 25 Ton Ram With Half Coupler 14-1/4" Stroke - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

Features a heavy-duty, one-piece aluminum body for durablity and light weight.

OTC 4132A​ 20-Ton Spring-Return Hollow Center Hydraulic Ram - Ideal for push/pull applications found in off-highway, construction, mining, and other industries where heavy equipment is maintained. Center hole permits extending screws, cables, etc., straight through the ram for versatility of application.

OTC 9500 3-Position, 4-Way Control Valve - This is a 3-position / 4-way lever operated, detent positioned valve for use with double-acting rams. Three positions are; Advance, Neutral and Return. Cylinder ports are blocked when in Neutral position, and pump flow is directed back to the reservoir.

4110A OTC 55 Ton Ram With Half Coupler 6-1/4" Stroke - Available in capacities of 5 to 100 tons and for maximum working pressures up to 10,000 PSI; 2 to 1 safety factor on material yield; designed and tested to meet ANSI B30.1. Standard stroke lengths of 5/8" to 14-1/4", these compact rams require a minimum of mounting space.

OTC 4145A 100-Ton "Shorty" Rams, Single-Acting, Spring Return - Forcing a gravity return ram to retract wastes both time and money. This OTC series of single-acting, spring-return rams eliminates that waiting. With their low collapsed height and the stroke you really need, these rams are ideal for a variety of applications.

OTC 4139 30-Ton Spring-Return Hollow Center Hydraulic Ram - Ideal for push/pull applications found in off-highway, construction, mining, and other industries where heavy equipment is maintained. Center hole permits extending screws, cables, etc., straight through the ram for versatility of application.

OTC 4180 17-1/2-Ton Power Twin Ram and Pump Set - This spring return unit is compact and lightweight. Ideal for jobs having restricted working space. Center-hole feature permits extending adjusting screws, cables, puller screws, etc., straight through the ram.

OTC 4175 "Shorty" Ram and Pump Set - Shorty rams provide lifting or pushing force in limited working space. Visual centering of load is simplified by a concentric ring pattern on piston top. Single-acting, spring-return. Two-speed hand pump gives fast piston approach.

OTC 4111 55-Ton Aluminum Ram - Get the strength of a steel ram but about half the weight. Easily carry single-acting, spring-return ram around the garage, shop, or into the field for on-the-vehicle repairs. Ideal for truck axle correction, trailer frame straightening, general vehicle maintenance, and heavy-duty lifting. With a 6-1/8" stroke, collapsed height 10-3/4" and an extended Height 16-7/8".

OTC 4140A 60-Ton Spring-Return Hollow Center Hydraulic Ram - Ideal for push/pull applications found in off-highway, construction, mining, and other industries where heavy equipment is maintained. Center hole permits extending screws, cables, etc., straight through the ram for versatility of application.

OTC 4116 100-Ton Aluminum Ram - Get the strength of a steel ram but about half the weight. Easily carry single-acting, spring-return ram around the garage, shop, or into the field for on-the-vehicle repairs.