The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

The ESS6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

9640 Associated  Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status.  For standard automotive, deep-cycle, AGM and GEL Cell Batteries

ESS6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

The CC6212 Associated Battery Cable Covers are designed for use with Memory Saver Cables or when removing batteries to prevent positive battery clamp from arcing. High Visibility & Corrosive Resistant MADE IN THE USA.

The MIL6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle
Batteries, as well as Spiral Cell, Orbital or Optima Batteries. Quick Disconnect DC Leads change from standard clamps cables to extra long NATO plug. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

The IBC6008 Associated 60 Amp 12 Volt Automatic Automotive Battery Charger / Analyzer provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

IBC6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The IBC6008MSK Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008MSK into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

The Associated ESS6100 is a 100 A high power Smart charger Power Supply with inverter technology. It allows you to Keep a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

Power and convenience. The K3153-1 packs 50% more charging and starting power than most portable chargers, plus features automatic 12-volt settings to shut output OFF at full charge, but turns the unit back on if the battery discharges for any reason, also a highly requested manual mode for those times a battery just wont take a charge from a automatic unit. The K3153-1 Charges 6 & 12 volt batteries, deep cycle marine batteries and provides reverse connection protection. Features include, Automatic charge setting for Deep Cycle type batteries. Automatic setting will turn off when battery is fully charged and resumes if discharged. Manual setting for charging discharged batteries or activating new ones.

PLA53 Solar Pro-Logix Ring 12V Male Cigarette Lighter Plug for PL2135 Charger. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2310 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2310.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2320 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2320.

The SOLAR PRO-LOGIX PL2140 automatic automotive battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a lead- acid battery installed in a vehicle, Flooded, AGM, Spiral Wound, Marine, Deep Cycle and LiFePO4, it can be charged and charged right with PRO-LOGIX. Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2410.

The new 4-bank Battery Maintenance Station, Model No. PL4020, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

PLA61 Solar Pro-Logix 5' Clamp Set For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61. SOLAR Pro-Logix automatic battery maintainers control many variables through each phase of the charging process to ensure an optimal charge every time.

PLA62 Solar Pro-Logix 10' Extension Cable For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA63 Solar Pro-Logix Short Clamp Set For PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA64 Solar Pro-Logix Short Length Ring Terminal Kit for PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2520.

PL6100 Solar Pro-Logix 12 Volt 60/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

The new 4-bank Battery Maintenance Station, Model No. PL4050, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

PL6800 Solar Pro-Logix 12 Volt 100/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

PL2112 Solar Pro-Logix 12V 1 Amp Lithium Battery Charger / Maintainer. Charges Conventional, AGM, Spiral Wound, Deep Cycle, Marine and Lithium (LiFePO4) batteries. PRO-LOGIX battery chargers from SOLAR are designed to provide continuous operation in a wide variety of professional and industrial battery service environments. They combine fully automatic operation utilizing a proprietary multi-phase charging process with the ability to properly charge multiple battery types. Advanced charging logic, robust components, quick set-up and smart display feedback mean effective and efficient charging for your operation.