Built for the Air Conditioning Serviceman who wants a high quality, dependable vacuum pump, the Eliminator® Series offers many higher end features without the higher end price. American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty, the Eliminator® is the best value vacuum pump in the industry. This is the only American made economy vacuum pump on the market.

DV-4E JB Industries 4 CFM Eliminator Vacuum Pump 115V 60Hz Motor with US Plug - Built for the air conditioning serviceman who wants a high quality, dependable vacuum pump, the ELIMINATOR® series offers many higher end features without the higher end price.  American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty.

Built for the Air Conditioning Serviceman who wants a high quality, dependable vacuum pump, the Eliminator® Series offers many higher end features without the higher end price. American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty, the Eliminator® is the best value vacuum pump in the industry. This is the only American made economy vacuum pump on the market.

DV-EP6 JB Industries 3/8" Red Plug For Handle: This Tethered Safety Cap is designed to prevent oil spills during transport.

DV-EP8 JB Industries 1/2" Red Plug For Handle: This Tethered Safety Cap is designed to prevent oil spills during transport.

DV-F6 Eliminates oil mist from pump handle. DV-F6 fits 3/8" exhaust pipe for all (Black Case) Eliminator series and pre-2008 model Platinums. DV-F8 fits 1/2" exhaust pipe in 2008 model Platinums & new style (Hammer case) Eliminator. Please check your handle before ordering.

DV-F8 Eliminates oil mist from pump handle. DV-F8 fits 1/2" exhaust pipe in 2008 model Platinums & new style (Hammer case) Eliminator, while DV-F6 fits 3/8" exhaust pipe for all (Black Case) Eliminator series and pre-2008 model Platinums. Please check your handle before ordering.

DV-T1 The TANK - The TANK vacuum pump oil caddy extends the life of your vacuum pump! All vacuum pumps require changing oil after every use.

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. Pint

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.

Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-hundred pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

NFT5-4-25 JB Industries 1/4" O-Ring Seal Cap 25 Pack - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

NFT5-4-CJ JB Industries 1/4" O-Ring Seal Cap with Bulk Jar (500 Piece) - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

NFT5-5 JB Industries 5/16" O-Ring Seal Cap 5 Pack - 5/16" SAE cap. Package of 5. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

Three pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-hundred pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

NFT5-8 JB Industries 1/2" O-Ring Seal Cap 3 Pack - 1/2" SAE cap. Package of 3. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

Replacement sight glass for vacuum pump DV-42N, DV-85N, DV-142N, DV-200N, DV285N, DV-3E, DV-4E, DV-6E. Used On All Models Except: Dv-3 Dv-5 Dv-127

PR-10 JB Industries Replacement Cover Assembly and Drain Valve. Replacement cover assembly includes sight glass and drain valve. For DV-4E and DV-6E. For DV-3 and DV-5 manufactured prior to January 2001. Cover Assy For New Eliminators (Gray Hammer Tone Finish) Note: Old Style Black Covers For Eliminators Are Not Available. New Style Will Fit DV127- DV3-DV5- DV85c- All DV3e- DV4e- DV6e Note: Also DV42 – DV42n With S/N Prior To 0101 Includes: Oil Fill Plug – Drain Valve And Sight Glass.

JB Industries Replacement valve for pump cartridge s/n 0107 and up DV-85N DV142N DV200N-DV285N. Kit For 3-4-5-6-7 Cfm Note: Can Not Be Used On Dv-142s With 6 Digit Serial Nos And Dv-200ns With Serial Nos Prior To 0796 Includes: 1ea Exhaust Valve – 1ea Exhaust Valve Retainer – 1ea Exhaust Valve Spacer – 1ea Intake Relief Valve – 1ea Intake Relief Valve Retainer.

Drain Valve, Used On All Models.

Replacement cushioned vacuum pump handle 3/8'' NPT for DV42N, DV-85N, DV-142N, DV-200N, AND DV-285N assembled prior to 2008 and DV-3E, DV-4E, and DV-6E.

1/2 HP Motor 115V Complete w/Switch and Line Cord

PR-207 JB Industries 1/2 HP 115/230V 50/60 Cycle Motor With Switch (No Cord , Order Separately)

Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure. Flexible couplers are a three part assembly: 2 metal hubs that look like gears and a flexible middle section. One of the hubs is attached to the shaft of the motor and the other is attached to the shaft of the cartridge. NOTE: The color of the flexible middle section can be either black or yellow.

New - Cover Seal For All Models Of Eliminators. Also replaces obsolete Cover Seal PR-11 For Dv85c, Dv127, Dv3, Dv5, (Dv42 and Dv42n With S/N Prior To 0101). Quad Ring .120" Thick.

Oil Fill Plug w/ O-ring

Shaft Seal, Used On All Models.

Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure. Flexible couplers are a three part assembly: 2 metal hubs that look like gears and a flexible middle section. One of the hubs is attached to the shaft of the motor and the other is attached to the shaft of the cartridge. NOTE: The color of the flexible middle section may be black, green or yellow.

PR-31 JB Industries 6 ft / 16 Gauge SJT Line Cord (Emerson Motor). Termination has 1) - Female 90 1/4" Quick Disconnect (Hot), 1) - Male 1/4" Quick Disconnect (Neutral), 1) - Ring Terminal (Ground).

Intake Trap O-Ring for pumps manufactured after 2001. For pumps manufactured prior 2001 see PR-215.

Splash Guard and Screw: Splash guard and screw (Excludes 3cfm manufactured before 1/01. Use PR-39)

1.5 3CFM Cartridge Complete w/O-Rings Cover Seal (Replaces D10043 PR-305)

DV-4E Cartridge Complete w/O-Rings & Cover Seal  PR-305)

PR-406 JB Industries DV-6E Cartridge With O-Rings & Cover Seal PR-305

PR-501 JB Industries Vacuum Pump Handle Cushion & Cap 1/2"

PR-506 JB Industries 3/8" Pump Handle Cap

PR-508 JB Industries 1/2" Pump Handle Cap

Rocker Style Switch w/ Wire Leads (Emerson)

PR-58 JB Industries 6 ft / 16 Gauge SJT Line Cord (Marathon Motor). Termination has 1) - Female 90 1/4" Quick Disconnect (Hot), 1) - Female 90 1/4" Quick Disconnect (Neutral), 1) - Ring Terminal (Ground).

PR-59 JB Industries PR-62 Pump Base Foot

PR-62 JB Industries Vacuum Pump Base with rubber feet and mounting Screws.

1/4" Intake with Cap

Replacement cushioned vacuum pump handle 1/2'' NPT for DV-3E, DV-4E, and DV-6E (Hammertone Case). Can be used as a universal pump handle for other manufactures units.

DV-85C DV-42 Cover Assembly w/Sight Glass and Drain Valve. Discontinued See PR-10

RT200R Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems

RT200RP Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB) (2-Pack). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems