|
|
|
|
DV-340N JB Industries 12 CFM Platinum Beast Vacuum Pump - Platinum® Series is the top of the line for both quality and durability. Backed by an unprecedented 24 month over-the-counter warranty, there is no better pump on the market. Because each Platinum® pump is made at our facility in Aurora, Illinois, quality and dependability are woven in with hard working American pride. Completely field repairable, our Platinum® series is designed to last. DV-340N features include; All metal construction with finned aluminum housing for heat dissipation, brass fittings and stainless steel valving. O-ring sealed oil drain valve to prevent leaks. 1 HP DC motor with broad operating voltage range. Illuminated low profile rocker switch. Lift ring for easier hoisting. Gas ballast for extended oil life, Large diameter oil fill opening. Angled easy access 1/4", 3/8" or 1/2" intake tee. Ergonomic 1/2" NPT break resistant handle. Large oil level sight glass. Four point stable base. Oil mist filter controls exhaust.
Power
|
115/230V AC,
50/60Hz
|
Stages
|
2
|
Displacement
@ 50Hz
|
340 l/m
|
Displacement
@ 60Hz
|
12 cfm
|
Horsepower
|
1-HP
|
RPM @ 50Hz
|
1445
|
RPM @ 60 Hz
|
1725
|
Ultimate
Vacuum
|
15 Microns
|
Intake Ports
(Male Flare)
|
1/4", 3/8", 1/2"
|
Oil Capacity
|
32 oz
|
Dimensions
|
N/A
|
Shipping
Weight
|
34 lb
|
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Features
- Platinum Beast 12 CFM
- 1 HP, 1725/1425 RPM capacitor start motor with thermal overload protection
- 1/4" x 3/8” 1/2" intake port
- 115 Volt, 230 Volt
- Standard US 115 Volt plug
- 32 ounce oil capacity
- Large, easy-to-see sight glass ensures proper oil level
- Oil fill is isolated on cover for easy fill
- Isolation Valve - No external valve needed to blank off system and leak check
- Increased spacing between intake tee and handle for more room
- Larger 1/2" handle now more ergonomic
- Tethered safety cap prevents oil spills during transport
- Heavy-duty chrome plating
- Increased oil capacity for cooler running temperature and reduced contamination
- Well-protected drain valve sealed with O-ring to prevent leaks
- 2 stage direct drive to achieve deep 15 micron vacuum
- All metal construction including all brass fittings
- Completely field repairable
- UL listed
- Made in the USA
|
|
|
|
|
|
|