13067 Robinair High Vacuum Grease is a silcone based lubricant designed for high vacuum assembly applications. A stiff, nonmelting silicone lubricating material used to lubricate synthetic and silicone rubber gaskets being used in high temperature applications. High Vacuum Grease resists mineral oils and common gases and works well for a setting gel to capture o-rings during assembly.

JB Industries’ Platinum® Series Vacuum pump is the best pump in the industry. This pump is designed for the serious air conditioning and refrigeration technician. American made and subjected to JB’s rigorous performance standards, the Platinum® Series is the top of the line for both quality and durability. Backed by an unprecedented 24 month over-the-counter warranty, there is no better pump on the market.

DV-EP6 JB Industries 3/8" Red Plug For Handle: This Tethered Safety Cap is designed to prevent oil spills during transport.

DV-EP8 JB Industries 1/2" Red Plug For Handle: This Tethered Safety Cap is designed to prevent oil spills during transport.

DV-T1 The TANK - The TANK vacuum pump oil caddy extends the life of your vacuum pump! All vacuum pumps require changing oil after every use.

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. Pint

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.

Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.

P90009 JB Industries 3/16" & 1/4" Coupler O-Ring 10 Pack

O-ring and gas ballast See PR-7

PR-10 JB Industries Replacement Cover Assembly and Drain Valve. Replacement cover assembly includes sight glass and drain valve. For DV-4E and DV-6E. For DV-3 and DV-5 manufactured prior to January 2001. Cover Assy For New Eliminators (Gray Hammer Tone Finish) Note: Old Style Black Covers For Eliminators Are Not Available. New Style Will Fit DV127- DV3-DV5- DV85c- All DV3e- DV4e- DV6e Note: Also DV42 – DV42n With S/N Prior To 0101 Includes: Oil Fill Plug – Drain Valve And Sight Glass.

Replacement “O” Ring For Gas Ballast In Trap – Used On Dv85c- Dv127- Dv3- Dv5- Dv85- And Dv142 Also Dv42– Dv42n With S/N Prior To 0101

JB Industries Replacement valve for pump cartridge s/n 0107 and up DV-85N DV142N DV200N-DV285N. Kit For 3-4-5-6-7 Cfm Note: Can Not Be Used On Dv-142s With 6 Digit Serial Nos And Dv-200ns With Serial Nos Prior To 0796 Includes: 1ea Exhaust Valve – 1ea Exhaust Valve Retainer – 1ea Exhaust Valve Spacer – 1ea Intake Relief Valve – 1ea Intake Relief Valve Retainer.

Drain Valve, Used On All Models.

Replacement cushioned vacuum pump handle 3/8'' NPT for DV42N, DV-85N, DV-142N, DV-200N, AND DV-285N assembled prior to 2008 and DV-3E, DV-4E, and DV-6E.

1/2 HP Motor 115V Complete w/Switch and Line Cord

PR-207 JB Industries 1/2 HP 115/230V 50/60 Cycle Motor With Switch (No Cord , Order Separately)

Cover Seal

New - Cover Seal For All Models Of Eliminators. Also replaces obsolete Cover Seal PR-11 For Dv85c, Dv127, Dv3, Dv5, (Dv42 and Dv42n With S/N Prior To 0101). Quad Ring .120" Thick.

Oil Fill Plug w/ O-ring

Discontinued See PR-76 DV-142 Intake Cross with Caps

Shaft Seal, Used On All Models.

Rocker Style Motor Switch (Marathon)

1/2 HP 230V 50 Cycle Motor w/Switch and Line Cord

PR-31 JB Industries 6 ft / 16 Gauge SJT Line Cord (Emerson Motor). Termination has 1) - Female 90 1/4" Quick Disconnect (Hot), 1) - Male 1/4" Quick Disconnect (Neutral), 1) - Ring Terminal (Ground).

Splash Guard and Screw: This is the DV-3E splash guard with screw.

Rubber Foot W/ Screw – Used On All Models Note: See Pr-62 (Base With Feet) To Upgrade For Stability Of Pump, With Serial No. 0101 And Higher. (1 per pkg.)

Splash Guard and Screw: Splash guard and screw (Excludes 3cfm manufactured before 1/01. Use PR-39)

Discontinued 5 CFM Cartridge See PR-303 & Swap out intake plates to retrofit.

Intake Tee W/ Caps 1= 3/8 Male Flare Port & 1= 1/4 Flare Male Port. (45 Degree Flare) Used On Dv85c- Dv85- Dv85n- Dv3- Dv5 Note: Not To Be Used For Dv3e- Dv4e- Dv6e.

PR-500 JB Industries Vacuum Pump Handle Cushion & Cap 3/8"

PR-501 JB Industries Vacuum Pump Handle Cushion & Cap 1/2"

PR-506 JB Industries 3/8" Pump Handle Cap

PR-508 JB Industries 1/2" Pump Handle Cap

PR-53 JB Industries DV-3 5 Flexible Coupler (-250 Models after 0198) DV-3 5 Flexible Coupler (-250 Models after 0198). Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure.

Rocker Style Switch w/ Wire Leads (Emerson)

Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure. Used On Dv85c- Dv127- Dv85- Dv142- Dv3- Dv5-And Dv42- Dv42n Prior To S/N 0101.

Replacement cushioned vacuum pump handle 1/2'' NPT for DV-3E, DV-4E, and DV-6E (Hammertone Case). Can be used as a universal pump handle for other manufactures units.

PR-66 JB Industries Intake Tee. 1/2" Flare x 3/8" Flare x 1/4 Flare Tee.

Gas Ballast w/O-Ring

1/4" Flare, 3/8" Flare, 1/2" Flare Vacuum Pump Intake Cross with Caps. Allows the pump to be connected to 3 size hoses for various applications.

Sight Glass Used On Dv127 Dv3 – Dv5. For the complete reservoir assembly see PR-10.

RT200R Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems

RT200RP Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB) (2-Pack). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems