DLO RHH/RHW Cable
DLO RHH/RHW Cable
DLO cable is used in telecom power supplies, mining equipment, industrial and earthmoving equipment, diesel electric locomotives and other instances where flexible power leads must be installed in conduit or raceways. It is made with fine stranded, annealed and tinned copper wire and meets AAR-598 and ASTM B33.
Insulation is ethylene propylene rubber (EPR), resists oils, alkalis and acids, and has excellent impact, abrasion and tear resistance.
- Chlorinated polyethylene (CPE) jacket
- 600V and 2000V rated
- 90° C wet/dry continuous exposure
- Suitable for -40° C applications
- Sold by the foot
- Fine stranded, annealed tinned copper wire in accordance with AAR-598 and ASTM B33
- Maximum conductivity, flexibility and corrosion resistance
- EPR (Ethylene Propylene Rubber) insulation, highly resistant to oils, alkalis and acids
- CPE (Chlorinated Polyethylene) jacket
- Excellent impact, abrasion and tear resistance
- VW-1 rated, flame retardant
- UL sun resistant
- 90°C wet/dry continuous exposure
- Suitable for -40°C applications
- 600V and 2000 Volt rated
- Industry Approvals: ICEA S-95-685/NEMA WC 70; UL 44 Type RHH/RHW-2 C(UL) RW90, MSHA – rated flame retardant; CSA RW90 @ 1,000 Volts
- REACH compliant; approved for CT use (1/0 and larger)
- NEC suitable as flexible wiring in open air trays, trays (1/0) or conduit
- Applications: telecom power supply systems, mining, industrial and earth moving equipment, motor leads, diesel electric locomotive, where flexible power leads must be installed in conduit or raceways
DLO
RHH/RHW Cable
|
Gauge
|
Nominal
Insulation
|
Nominal
O.D.
|
Approx.
Lbs/MFT
|
Part No.
|
| 2/0 ga |
0.09
|
0.69
|
0.11
|
208107
|
| 3/0 ga |
0.06
|
0.32
|
0.11
|
208108
|
4/0 ga
|
0.06
|
0.39
|
0.25
|
208109
|
| 262 MCM |
0.06
|
0.44
|
0.25
|
208110
|
| 313 MCM |
0.08
|
0.51
|
0.33
|
208111
|
| 373 MCM |
0.08
|
0.56
|
0.40
|
208112
|
| 535 MCM |
0.09
|
0.62
|
0.49
|
208113
|
777 MCM
|
0.09
|
0.68
|
0.61
|
208114
|
|
|
|
