Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life.

Pocket Valve Core Tool w/ 4 Spare Cores

Dual Valve Core Tool (1/4" SAE Valves & Auto R-134a Valves)

TLVCS410 CPS Mini-Split 5/16" Female x 5/16" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 5/16" Male flare access fittings on the top).

TLVC410A CPS Mini-Split 5/16" Female x 1/4" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the top).

Valve Core Tool R134A 8 MM And 10 MM Late Model. Those stubborn 8 mm and 10 mm valve cores on those late model vehicles don’t stand a chance with CPS' heavy-duty valve Core Tool. Knurled diameter body lets this tool get the job done.

Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed with a stainless steel ball and brazed side fitting for durability and long life. (This tool has 1/4 Flare fittings on all ports).

Remove and install the valve core from a 5/16" (1/2"-20) male UNF access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (All 3 fittings on this tool are 5/16")

Rebuild kit for TLVC4 / TLVCS

Rebuild kit for TLVC410 / TLVCS410

TLVC6 CPS JRA 6mm Valve Core Tool w/ 4 Spare Cores

Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the side and top).

Large Bore Valve Core Remover Tool: This item allows you to remove and install the Large Bore valve cores in late model vehicles.

Valve Core Remover Tool - Small: This item allows you to remove and install Standard valve cores.

Master Valve Core Remover/Installer. Universal R-12 134A Valve Core Removal Tool Set. Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver. This tool pays for it self the first time you use it. The tool removes standard R-12 cores as well as most R-134a cores on both Low & High Side Ports. Heavy brass construction with a fine chrome finish prevents corrosion and keeps the tool looking nice as well as easy to clean.

2473 Heavy Duty Large Bore Valve Core Tool - Extra long reach for hard to reach valves. Remove and install large bore valve cores (up to 10mm).

6819 FJC Inc. R-1234yf Valve Core Remover / Installer. Remove and install 1234yf valve cores with no refrigerant loss. Covers standard and large valve cores for R-1234yf vehicles. Set of one Blue Low Side coupler and one Red High Side coupler. Fully adjustable. High quality brass construction.

A32004 1/4" Valve Core Tool

Evacuation and recovery valve core remover tool. Plier type with a quick release trigger which punctures large holes into the line for discharge of a recovery unit. Fits 3/16'' to 7/8'' OD hard tubing.

Replacement hardened steel needle and gasket for A32100 evacuation and recovery tool.

1/4'' valve core remover tool by JB (A32500N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

Replacement core remover bit for A32500N.

Replacement Core Remover for A32525N and A32504

1/4'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

1/4'' valve core torque tool made in the USA. Sets the proper torque every time! Calibrated to precise torquing requirements for core valves, the tool will no longer tighten once proper torque is achieved. Eliminates guesswork which results in under or over torquing of cores

5/16'' valve core remover by JB (A32505N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax. As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-S250 JB Industries Core Max 1/4 Seat  - Tube/stub - 3 Pack

CM-S370 JB Industries Core Max 3/8 Seat  - Tube/stub - 3 Pack

CM-SNAP JB Industries SnapMate High Flow Service Quick Connector For CoreMax Valve Cores. The SnapMate service connectors are designed to provide quick connections to CoreMax Valve Cores as well as standard access valves. The Collets grip on the threads and are specifically designed for the Service Industry by providing quick and easy connections to all 7/16-20 (1/4" SAE 45º Flare) access valves.

CM-SS250 JB Industries Core Max 1/4 Seat/Saddle NIP - 3 Pack

CM-SS370 JB Industries Core Max 3/8 Seat/Saddle NIP - 3 Pack

CM-TRQ JB Industries Core Max Torque Wrench. The CoreMax Torque Wrench is used to properly install and torque the JB CoreMax valve into the CoreMax seat. The wrench is preset to 8 ft/lbs. of torque.

CM-VC003 JB Industries CoreMax High Flow Valve Core With Caps (3 Pack). The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.  As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-VC010 JB Industries CoreMax High Flow Valve Core With Caps (10 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

CM-VC025 JB Industries CoreMax High Flow Valve Core With Caps (25 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

5/16'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

A32008-B JB Industries Valve Core Torque Tool Bulk (12 Pack)

A32535N JB Industries 5/16" Core Removal Tool

CM-VC100 JB Industries Core Max Valve With Cap (100 Pack) Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

026-80062-00 RTI Valve Core Tool R12

026-80192-00 RTI Valve Core Remover

026-80213-00 RTI Valve Core Tool R134a

026-80292-00 Discontinued See TLVC810 Valve Core Tool R134A 8 Mm And 10 Mm Late Model. Those stubborn 8 mm and 10 mm valve cores on those late model vehicles don’t stand a chance with RTI's heavy-duty 026-80292-00 Valve Core Tool. Its 5-1/4 in. length combined with its 3/4 in. knurled diameter body lets this tool get the job done. The use of a 3/8 in. wrench on the hex of either adds plenty of leverage.

Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver. This tool pays for it self the first time you use it. The tool removes standard R-12 cores as well as most R-134a cores on both Low & High Side Ports. Heavy brass construction with a fine chrome finish prevents corrosion and keeps the tool looking nice as well as easy to clean.

R134A Universal Large Bore Valve Core Remover

R134A Valve Core Remover And Installer. For small core fittings. R-134a Valve Core Remover Installer built with Ball valve design, No need to pump down a system for a simple core change. Controls refrigerant flow with 1/4 turn of the valve lever. Lever position also gives visual indication of whether valve is opened or closed. Solid brass construction High and low side fitting included.

Universal Valve Core Tool

Standard Valve Core Remover/Installer Assembly

Tip Pin And O-Ring For Valve Core Remover Kit 58490-377

Gm Large Bore Valve Core Remover/Installer Assembly

Jra R134A Valve Core Remover/Installer Assembly

Eaton R134A Low Side Valve Core Remover/Installer Assembly

Eaton R134A High Side Valve Core Remover/Installer Assembly

58490-769-K Mastercool Tip & Pin For Valve Core Remover Kit 58490-768

R134A Standard & Jra (M6) Valve Core Kit

R134A Eaton (M8 & M10) Valve Core Kit

Valve Core Remover (Access Valve Cores Not Included)

Valve Core Removal Kit (Complete W/6 Access Valve Cores)

Thread Repair Tool For 1/8? 3/16? And 1/4? Service Ports

Standard Valve Core Remover/Installer 1/4"

Replacement Tip & Pin For 91490 91496 & 91499

GM Large Bore Valve Core Remover/Installer 1/4"

Replacement Tip & Pin For 91491 & 91492

Gm Large Bore Valve Core Tool Shaft Only

Replacement Seal Kit For 91490-91491

1/4? X 3/16? Adapter For Standard Valve Core Remover/Installer

1/4" X 1/8" Adapter For Large Bore Valve Core Remover/Installer

Valve Core Service Tool W/Access Port

91498 Mastercool Valve Core Remover & Installer For R410A. Newly designed with patented locking mechanism, the 91498 is the only valve core remover kit that has a safety nut allowing the technician to freely access the valve core without fighting high pressures. Packaged in a blow molded carrying case, this kit also offers ½”-20 UNF and ¼” flare fittings for all refrigerant applications. Now you can charge the system without a valve core. The system can be “QUICK CHARGED” after removal of the valve core. Using manifold gauge set with valve lever in CLOSED position, connect the correct charging hose to the valve (Fig. 2A or 2B). OPEN the valve and charge the system. After charging, CLOSE the valve and disconnect the hose. Proceed with valve core installation.

Mastercool 92207 Refrigeration Gasket Depressor Assortment Kit consists of 42010 1/4" gaskets, 42016 screw type depressors and 85511 3/8" hose gaskets.

For removal and insertion of valve core. One end standard, one large bore.

One end is used for deflation, the other end to install or remove valve cores

Valve Core Remover / Installer Deep Core R-134A

Access Valve Core Remover With 6 Valve Cores

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly.

Thread Chaser For Use 18560 & 18561 Access Valve Core Remover / Installer. For use with No. 18560 or 18561, value core remover / installer. This thread chaser actually repairs damaged threads on valve cores in the service line, without releasing refrigerant into the atmosphere.

For use with No. 18560 or 18561, value core remover / installer. this extractor lets you remove damaged cores in the service line while the system is fully charged, without releasing refrigerant into the atmosphere.

Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of vacuum and charging.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve.

These depressors fit behind and protrude through the hose gasket on 1/4" flare and 1/2 ACME standard fittings. If you are replacing hose gaskets it's a good idea to replace these as well.

40553 Robinair Gauge Quick Coupler Valve Core Depressor 1/8 FPT X 1/4 FFL

43150 Robinair –58° To 302° F In-Stream Superheat Thermometer / Valve Core Removal Tool Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the refrigerant directly. Connects directly to a standard 1/4" flare access fitting. Remove, test and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant, fast accurate measurements ensure to the degree temperature measurements for superheat or subcooling. A must have tool for the serious refrigeration engineer.

18080 Robinair 1/4" Compact Thumbscrew Core Depressor attach to standard 1/4" flare hose ends and allow the technician to control flow of gas by screwing in the depressor, it also allows the core to be "shut off" before removing the hose preventing finger burn.