A32804 Copper Saddle Access - 1/4" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32805 Copper Saddle Access - 5/16" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32806 Copper Saddle Access - 3/8" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32808 Copper Saddle Access - 1/2" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32810 Copper Saddle Access - 5/8" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32812 Copper Saddle Access - 3/4" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32814 Copper Saddle Access - 7/8" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32816 Copper Saddle Access - 1" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

A32818 Copper Saddle Access - 1 1/8" Solder. The new A32800 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.

The new A32900 series of saddles offer the best protection from leaks. Once brazed on, you can check for leaks before piercing the tube. The steel pin is inserted and the cap is tightened down to pierce the tube. Body sizes are contoured to match specific tube sizes. The Braze/Tapper has a hardened steel-piercing needle and is furnished with a cap. Use these fittings with Sil-phos alloy and copper fittings. Install through the side of the larger line to extend length approximately two inches.