025-010-HP-FB RefTec 1/4" X 10' Ball Valve Hose. (1) 10 foot 1/4" Ball valve hose.
Lite EvacRecovery Unit Ball Valve Hose Set. (1) 10 foot 1/2" Ball valve hose & (1) 20 foot 1/2" Ball valve hose. RefTec’s Lite Evac recovery system provides efficient and safe recovery of most Medium pressure refrigerants.
Combines capabilities of Evac Commercial & Lovac systems to offer great recovery rates on R11, R12, R22, R113, R123, R134a, R404, R500, R502, R410a & other high pressure refrigerants or blends. Rugged open drive compressor provides years of reliable service, even on refrigerants heavily contaminated with oil, air, moisture, & acids.
The RefTec Cheetah incorporates a high CFM vacuum pump to recover these gases faster than anything else on the market. This water-cooled system utilizes 7/8” piping and a reduced number of 90 degree bends to achieve the fastest throughput for R123, R11 and other low and medium pressure gases. A larger 2Hp motor keeps the Cheetah pumping quickly down to the desired 29” vacuum to meet AHRI regulations. An onboard suction accumulator, high and low pressure switches, oil separator and thermal overload protection ensure the Cheetah’s safety features surpass all of the industry’s standards.
RefTec Sieve Desiccant Media (8x12 Mesh) Per Pound. Molecular Sieve 8×12 Mesh desiccants are extremely effective at removing water from liquids and gases. Usually Requires 20 pounds for most applications, see your manual for amounts and application.
EVAC Refrigerant Recovery System High Speed, High Efficiency Recovery and storage of all High Pressure Refrigerant. Blazing Recovery Rates to Service Chillers & Other Large Cooling Systems. Recovers R22 at 325-lb/min liquid & 6-lb/min vapor!. Rugged open drive compressor provides years of reliable service, even on refrigerants heavily contaminated with oil, air, moisture, & acids. Equipped with in-line oil separator. Services R12, R22, R134a, R502, R410a & other high-pressure refrigerants. Easy Operation, purging lines and switching from liquid to vapor recovery modes simply involves turning three 3 way hand valves and rerouting one hose.
A chiller service tool for filtering refrigerant upon recovery to eliminate a substantial portion of oil, acid and moisture. Lightweight cart construction with heavy duty tires for portability. Inlet outlet fittings are 3/4” Male Flare connections for large hose configuration. Convenient 7/8” sight glass on each shell. Removes most particulates from the chiller as the gas is recovered. Works in conjunction with any brand recovery unit or refrigerant pump. Can utilize any 48 cubic inch filters including high moisture, acid and particulate cores. Single and Dual Core models available.
RefTec’s Lite Evac recovery system provides efficient and safe recovery of most Medium pressure refrigerants. The unit consists of a 2-hp open drive compressor; high capacity 1200 cfm air cooled condenser, system pressure gauge, tank pressure gauge, a valving system consisting of one manually operated 3-way valve, oil return valve and one 2-way evacuation valve. Unit connections are 1/2” male flare with isolation valves. Fast and portable unit for high pressure refrigerants Unit is mounted in a solid lightweight aluminum frame for portability and ease of use. For use with medium-large tonnage chillers. 2 Heavy duty pneumatic tires make for greater portability and ease of use. R410a rated. 80% tank full float switch and 12’ cable make off loading gas a snap, simply fill tanks to capacity and swap. Air cooled unit provides ample heat exchange for even big jobs. Heavy duty lift handles. ETL certified.
External Water Cooled Condensing Kit for RefTec’s Lite Evac recovery system, which provides efficient and safe recovery of most Medium pressure refrigerants.
MPS-115 RefTec MINIPURGE Portable Refrigerant Purge Unit High Speed Purge Unit Processes all Refrigerants MiniPurge portable purge unit temporarily connects to chillers and storage tanks charged with high or low pressure refrigerants and rapidly eliminates non-condensibles. Unit is ideal for supplementing thermal purge units during seasonal start ups on R11 or R123 chillers. A 0.5hp compressor draws refrigerant vapor, pumps it through a condenser, and compresses it in a stainless steel purge vessel. Condensed refrigerant is forced back to the cooling system or recovery tank. When pressure rises to a certain point, non-condensibles are discharged with virtually no loss of refrigerant. High Speed Purge Unit Processes all Refrigerants.
MPS-240 RefTec MINIPURGE Portable Refrigerant Purge Unit High Speed Purge Unit Processes all Refrigerants MiniPurge portable purge unit temporarily connects to chillers and storage tanks charged with high or low pressure refrigerants and rapidly eliminates non-condensibles. Unit is ideal for supplementing thermal purge units during seasonal start ups on R11 or R123 chillers. A 0.5hp compressor draws refrigerant vapor, pumps it through a condenser, and compresses it in a stainless steel purge vessel. Condensed refrigerant is forced back to the cooling system or recovery tank. When pressure rises to a certain point, non-condensibles are discharged with virtually no loss of refrigerant. High Speed Purge Unit Processes all Refrigerants.
RGA202L-MID RefTec 2-1/2" Dial, 30/0/300 PSI, 1/4" NPT Gauge
Evac-ASME Refrigerant Recovery and Storage System High Speed, High Efficiency Recovery and storage of all High Pressure Refrigerant.Blazing Recovery Rates to Service Chillers & Other Large Cooling Systems. Recovers R22 at 325-lb/min liquid & 6-lb/min vapor!. Rugged open drive compressor provides years of reliable service, even on refrigerants heavily contaminated with oil, air, moisture, & acids. Equipped with in-line oil separator. Services R12, R22, R134a, R502, R410a & other high-pressure refrigerants. Easy Operation. Purging lines and switching from liquid to vapor recovery modes simply involves turning three 3way hand valves and rerouting one hose.
RFC048 RefTec 48" Cubic Inch Charcoal Filter
The RLP From RefTec is a commercial / industrial grade pump used to transfer all class I, II, III, and IV refrigerant at rates up to 20GPM. The Refrigerant Liquid Pump standard model has 3/4" male flare connections with quick-connects as an option. Simple hose connections make fast work of chillers and large installations. Power requirements 110/115V 50/60Hz 1Ph 1.5Hp 15Amp. Unit dimensions are approximately 12.0" high x 14.50" wide x 9.0" deep. 55-lbs. Transfer Rate, 20GPM. Combine this pump with a Filter Rack for Recycling and clean-up of refrigerant for huge savings over replacement gas.
The RLP From RefTec is a commercial / industrial grade pump used to transfer all class I, II, III, and IV refrigerant at rates up to 20GPM. The Refrigerant Liquid Pump standard model has 3/4" male flare connections with quick-connects as an option. Simple hose connections make fast work of chillers and large installations. Power requirements 220/230V 50/60Hz 1Ph .75Hp 15Amp. Unit dimensions are approximately 12.0" high x 14.50" wide x 9.0" deep. 55-lbs. Transfer Rate, 20GPM. Combine this pump with a Filter Rack for Recycling and clean-up of refrigerant for huge savings over replacement gas.
RM-025-6 RefTec 1/4" 6 Valve Manifold
ROS924F RefTec Oil Separator Filter (Each)
RPE048 RefTec 48" Cubic Inch Pleated Filter
Tired of Slow Recovery Rates? HandiVac Offers Twice the Recovery Capacity of Typical Oil-less Units. Dual 0.75hp GoldPlus oil-less compressors double recovery rates for servicing commercial cooling units. Built-in anti-slugging feature automatically prevents liquid from harming compressors during direct liquid transfer. Oil-free compressors eliminate maintenance hassles. Easily switch between R12, R22, R134a, R500, R502, R410a, R409, MP39 and other high pressure refrigerants & blends. Automatic low pressure shut off at 15-in. Hg. Float cable connection with bypass switch included.
RVP-1409 RefTec Gallon POE Compressor Oil (Each)
The SHARK-240 RefTec Shark Refrigerant Recovery Recycling Reclamation System is the first unit to gain AHRI certification for cleaning dirty R134a back to ARI 700 standard reclaimed gas in a single pass. The Shark can clean R22, R410a and other gases just as well. Utilizing a rugged open drive compressor, easily serviceable desiccant tubes and an oversized condensing fan, The Shark quickly removes, oil, acids, moisture and hard particulates from even the dirtiest of gases. Used in conjunction with RefTec’s MiniPurge System, the gas produced meets AHRI’s standards for non condensables as well.
