TPI 1008A CO2 And Temperature IAQ Meter - Measure and display carbon dioxide (CO2) and temperature. The TPI 1008A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

TPI 1010A CO2 CO Temperature Humidity IAQ Meter With PC Data Logging Software And USB Cable - Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

29435 JB Industries Gas Pressure Kit (LP and Natural Gas) - Gas pressure test kit for natural and LP gases. Scales 0-20 oz/sq. inch; 0-35" of water column. Diaphragm gauge scale comes complete in case with hose and hook-up fitting. Made in the USA.

29436 JB Industries Gas Pressure Kit (Natural Gas ONLY) - Gas pressure test kit for natural gas. Scales 0-20 oz/sq. inch; 0-35" of water column. Diaphragm gauge scale comes complete in case with hose and hook-up fitting. Made in the USA.

5346 Brass Fitting 1/8 Npt X 1/4 Inch Barb (Smooth)

TPI 608 Digital Manometer -  Single input manometer with +/-60inH2O range. Four units of measure: inH2O, mbar, KPa, PSI and mmH20. Backlight display.  The 608 digital manometer measures pressure or vacuum in four units of measure. Please follow manufacturers recommendations on all equipment being serviced with the 608.

TPI 610 Digital Manometer -  Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Auto power off, Backlight display, Zero function, Trim mode to stabilize readings. This model measures over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each is supplied with carry pouch, battery and instruction manual.

TPI 615 Digital Manometer -  Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.  This model measures over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each is supplied with carry pouch, battery and instruction manual.

TPI 621 Digital Manometer -  Dual Differential Input Manometer with ±120 inH2O range and 0.001 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 623 Digital Manometer  -  Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

TPI 625 Digital Manometer -  Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 635 Digital Manometer  -  Dual Differential Input Manometer with ±5 psi range and 0.001 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 645 Digital Manometer  -   Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

TPI 665 Digital Manometer -  Dual Input Differential Manometer with ±100 psi range and 0.01 psi resolution. Data logging with optional A665 software and docking station. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. ¼” NPT fittings.

TPI 665L Digital Manometer  -  The slim design 665L is a hand-held, differential input manometer with data logging capability. Digital filter, min/max, one touch zero, and backlight display are just a few of the features of the 665.

TPI 706 High CO Analyzer -  Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button. The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

TPI 707 Carbon Monoxide (CO) Analyzer  -  Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use. The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up if the date of calibration is one year or older.

TPI 708 Combustion Efficiency Analyzer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740 Combines the 708 Combustion Efficiency Analyzer with the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740OIL Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A788 Smoke Test Pump & Filter Paper, A790 Analog Oil Pressure Gauge and the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C10 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A740 Infrared Printer, 2 GK13M K-Type General Purpose Beaded Tip Probes, 2 A603 Brass Fittings (1/8" NPT x 1/4" Barb) and 2 A605 Brass Fittings (1/4" T-Fittings)  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C5 Combines: 708 Combustion Efficiency Analyzer and 270 Autoranging Digital Clamp with Capacitance  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C7 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance and A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C8 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C9 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance, 621 Digital Manometer, A740 Infrared Printer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708OIL Combines: 708 Combustion Efficiency Analyzer with the A788 Smoke Test Pump with Filter Paper -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709 Combustion Efficiency Analyzer and Differential Manometer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740 Combines the 709 Combustion Efficiency Analyzer and Differential Manometer with the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740C1 Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A740 Infrared Printer and A773 Sulfur Filter - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740OIL Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A740 Infrared Printer, A773 Sulfur Filter, A790 Analog Oil Pressure Gauge and A788 Smoke Test Pump with Filter Paper - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709A740OIL Combines: 709 Combustion Efficiency Analyzer and Differential Manometer, A773 Sulfur Filter, A790 Analog Oil Pressure Gauge and A788 Smoke Test Pump with Filter Paper - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709R Combustion Efficiency Analyzer and Differential Manometer with Rechargeable Ni-Mh Batteries - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709RA740 Combines the 709R Combustion Efficiency Analyzer and Differential Manometer with Rechargeable Ni-Mh Batteries and the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740 Combines the 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface with the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740C1 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, A740 Infrared Printer and A773 Sulfur Filter - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712A740OIL Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, A740 Infrared Printer, A773 Sulfur Filter, A788 Smoke Test Pump with Filter Paper and A790 Analog Oil Pressure Gauge - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712C5 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface and 270 Autoranging Digital Clamp with Capacitance - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 712C7 Combines: 712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface, 270 Autoranging Digital Clamp with Capacitance and A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 715 High CO (above 10,000ppm carbon monoxide) Combustion Analyzer with Built-in Differential Thermometer, Differential Manometer, and NO Measurement & NOX Calculation - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

716NA740 TPI 716N Combustion Analyzer And A740

TPI 739A Combustible Gas Leak Detector - Designed to provide personal protection from potential hazardous conditions and help find the source of combustible gases fast!

TPI 770 Ambient CO Monitor / Analyzer -  Measure / monitor ambient CO levels in home and office spaces. Visual and audible alarm indicates unsafe CO levels. The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

TPI 810 Fiber Optic Inspection Tool -  Model 810 Fiber Optic Inspection Tool. Use the 810 to perform non-invasive visual inspections of equipment including heat exchangers.  The 810 is a fiber optic inspection tool used to look in confined or internal constricted areas previously deemed inaccessible. The 810 has a built-in LED light source for illuminating the viewing area and a 45 degree mirror for looking at sides and walls. Is is easy to use and fits comfortably in your hand

The TIF8600 is an easy-to-use hand-held CO2/Temperature monitor. The unit provides stable, highly accurate readings due to our patented dual beam NDIR technology. Equipped with a 0-4V output, the unit is perfect for long-term monitoring/recording. The unit features a large, easy-to-read display with a push-button interface which allows for easy calibration, quick adjustments for altitude correction, and simple toggling between ºC and ºF temperature readings. A new feature of the sensor now includes the ability to calculate and display the cfm/person ventilation rate in a space based on the inside/outside CO2 concentration.

TPI 9000 Pocket Inspection System -  TPI Model 9000 Inspection. Are your Inspections really getting done? Verify inspections are getting done. Easy To use. Consistently capture the same Metrics for every asset. Value priced. Rugged IP67 case. Automated report generation. Optional: RFID and network.

A603 TPI Brass Fitting 1/8 Npt X 1/4 Inch Barb

TPI A740 Infrared (IR) Printer - Use the A740 with select TPI instruments to print hard paper copies of your measurement data.

A763 TPI Mini Pump Protection Filter

A770 TPI Flue Probe With Temperature

A770-20 TPI 20 Foot Flue Probe With Temperature

A771 TPI Carbon Monoxide Accessory For DMM's -  The A771 is an advanced state-of-the-art Carbon Monoxide monitor that may be used to measure levels of carbon monoxide (CO) in the parts per million (ppm) range when used with a digital multimeter (DMM).

A773 TPI Sulfur Filter For Oil

A774 TPI 6 Foot Silicone Pressure Tubing For Combustion Analyzer And Manometers With Barbed Fittings

A775 TPI Static Tip And 6 Foot Silicone Pressure Tubing

A776 TPI Static Tip

A784 TPI Flow Regulator For 715

A787 TPI Soft Carrying Case For 700 Series Combustion Analyzers And 270

A791 TPI 4 Inch Surgical Tubing

A797 TPI Natural Draft Flue Probe

A917 TPI Waterproof Pelican Case

• Accurately measure O2, CO, CO2, draft pressure
• Lower cost of ownership with four-year sensor warranty
• Large 5.5” touchscreen display with one-touch power on

• Accurately measure O2, CO, CO2, draft pressure
• Lower cost of ownership with four-year sensor warranty
• Large 5.5” touchscreen display with one-touch power on

• Accurately measure O2, CO, CO2, draft pressure
• Built-in manometer means one less tool to carry
• Automatically separates and returns accumulated water to the flue using the patent pending HydroCycle™ Pump technology.
• Large 5.5” touchscreen display

• Accurately measure O2, CO, CO2, draft pressure
• Built-in manometer means one less tool to carry
• Automatically separates and returns accumulated water to the flue using the patent pending HydroCycle™ Pump technology.
• Large 5.5” touchscreen display

• Compatible with Fieldpiece combustion analyzers
• Compact and portable
• Rechargeable lithium battery

TPI GK11M General Purpose Beaded Tip Probe - K-Type: Wide temperature range used in many digital thermometers. Identified by a yellow connector.

PRH2 Fieldpiece Digital Psychrometer - For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional.  Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.

RCONE2 Fieldpiece Cone Lock (SOX3)

RCONE3 Fieldpiece Part-Probe Lock CAT45/85

RCP85 Fieldpiece Part- CAT85 Replacement Probe

RFC10 Fieldpiece Part-Dust Filters (x10) CAT45/85

RSCOR Fieldpiece Part-CO Sensor CAT45/85

RSO2 Fieldpiece Field-replaceable Oxygen Sensor for SOX3 - The SOX3 uses an oxygen smart sensor. The icon indicates the approximate life remaining on the sensor and when the indicator is empty, it's time to replace sensor.  Techs no longer have to send their instruments in for calibration because the oxygen sensor simply twists in and out.

RSO2L Fieldpiece Part-O2 Sensor CAT45/85

RSOX3 Fieldpiece Barrel, Handle, Thermocouple and Hose for SOX3 - The RSOX3 comes with the SOX3, but if it's lost, it can be replaced.  The RSOX3 consists of an 8-foot dual-channel hose, barrel, handle and thermocouple.

RWT2 Fieldpiece Part-CAT45 Water Trap

SOX3 Fieldpiece Combustion Checker with Auto Pump - Fast, Easy, Furnace Tuning.The SOX3 Combustion Check is a great tool to easily tune furnaces when a full combustion analysis isn't necessary. Designed specifically for HVACR pros, the SOX3 provides all the essential measurements needed to tune most combustion equipment. It directly measures %O2 and flue temperature, and calculates %CO2, %Excess Air, and combustion efficiency.

TP-1BULK TPI Threaded Hole Plug (Use To Plug Combustion Test Holes) 100 Pcs.

TP1 TPI Threaded Hole Plug (Use To Plug Combustion Test Holes) 10 Pcs.