Adjustable Clutch Plate Spanner Wrench Keeps the clutch plate from turning; pilot pins adjust to fit all compressors.

The 11009 Robinair Clutch Plate Remover is designed to overcome resistance when removing the clutch plate. For Ford FS6 and Chrysler C-171 compressors.

Clutch Hub Remover: This clutch hub remover nut and arbor is for Harrison GM DA-6, HR-6 and V5 compressors, and is also available in FJC 2925 Clutch Hub Puller / Installer Tool Kit.

Clutch Hub Remover: This clutch hub remover arbor is for Zexel / Mitsubishi CH Series compressors, and is also available in FJC 2925 Clutch Hub Puller / Installer Tool Kit.

Clutch Hub Installer: This clutch hub installer arbor is for Harrison GM DA-6, HR-6, V5 and R4 compressors, and is also available in FJC 2925 Clutch Hub Puller / Installer Tool Kit.

Clutch Plate Remover / Installer For Gm Da6 And 5 Compressors

OTC 4537 A/C Clutch Holding Tool - This three-stud spanner wrench keeps the A/C clutch from turning when loosening or tightening the retaining nut. Adjusts quickly with brass thumbscrews to fit various styles of A/C compressors used on GM, Ford, and Chrysler vehicles. Also fits a variety of other pulleys.

OTC 4800 Clutch Hub and Alternator Puller - Removes clutch on Big Twins with 3, 5, and 10 fingers. Also works on Sportster transmission sprocket and clutch. Pulls motor sprockets, alternator covers, and many general pulling applications.

Tecumseh Hr 980 Clutch Pulley Retaining Nut Remover & Installer

Rotor Bearing And Clutch Assembly Installer For R4 Compressor

Diesel Kiki Clutch Installer

Clutch Remover 5/8 X 2" #11 Thread

Clutch Remover 5/8 X 2" #18 Thread

GM Clutch Plate Remover

GM Clutch Plate Installer

Universal Clutch Holder Wrench

Sankyo Clutch Plate Puller

Sankyo Clutch Plate Installer

Pulley & Clutch Remover Jaws

Clutch Installing Pilot

91000-A Mastercool Deluxe Clutch Hub Puller / Installer Kit

Nippondenso Clutch Plate Remover

Diesel Kiki Drive Plate Remover

Import Clutch Plate Installer

Chrysler/Ford Clutch Pulley Support

Pulley & Clutch Remover Jaws

Clutch Plate Remover

Diesel Kiki Clutch Puller Thrust Pin

Mitsubishi/Sankyo Clutch Plate Remover

Gm Clutch Plate Remover Arbor

GM Clutch End Plate Remover (Complete)

Gm-R4 Clutch Plate Remover Arbor W/2-10 mm Bolts

Gm Da6 Clutch Plate Remover

Gm Da6 Clutch End Plate Installer

Gm Clutch End Plate Removers

Clutch End Plate Arbor

Hub Remover

Hub Holder

Diesel Kiki Clutch Plate Puller

Diesel Kiki/Mitsubishi Deep Remover Arbor

This domestic and import compressor clutch tool kit includes the most popular tools that remove and install clutch hubs. In addition, the universal spanner wrench has been added. The instruction manual covers all specifications for air gap, oil, compressor id, and troubleshooting tips

Comprehensive variety of A/C clutch hub pullers and installers for popular A/C compressors such as GM, Ford, Chrysler and imports. For damage-free removal and installation of the clutch hubs on these air conditioning compressors: GM-Harrison DA-6, HR-5, V-5, A-6, and early R4; Nippondenso Ford/Chrysler A590, C171, FS-6, 6P148A (new style); Sanden & Sankyo; York/Tecumseh HR980; Zexel/Mitsubishi CH series.  Set includes a removing flange, plus forcing screws and adapter assemblies to remove and install virtually all clutch hubs. Includes blow-molded plastic case.