246-552-666 On / Off Switch For JNC550A

ESA1 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 48" adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements.

ESA214 Charger With Small Jack (ES2500 - ES2500C New Style)

Wall Charger with pin type jack. For most units produced after 1999 with auto charging boards.

ESA272 Jump-N-Carry Smart Cable Clamp Set JNC311-JNC318

ESA275 Charger With Small Jack For ES400-ES580-JNC311-JNC318. Replacement wall charger for ES400/ES580/JNC311/JNC318 models. Uses a small pin jack connection to a port on the side of the unit. Note: it is critical that you only use the proper charger to charge your lithium jump starter.

ESA276 Jump-N-Carry 12V Female Socket Adapter For ES400-ES580-JNC311-JNC318. 12V adapter for your lithium jump starter. Designed to provide 12V output capability to power accessories and allow the jump starter to be used as a memory saver. Connects to 12V/10A output pin on the side of the jump starter. Included with Models JNC318 and ES580.

Clore Automotive introduces the SOLAR ESA30 OBD II Memory Saver Connector, a memory saver connector that can be used in conjunction with a jump starter to preserve vehicle codes and electronic presets while a vehicle’s battery is disconnected. The ESA30 can be used on any jump starter with a 12 Volt power port. The ESA30 acts as an interface connector between a jump starter and a vehicle’s OBD II port. This prevents any electronic memory loss when disconnecting a vehicle’s battery. A proper connection is confirmed by the ESA30’s built-in LED light.

ESA5 12 Volt extension cord Male cigarette lighter x Male cigarette lighter 15' adapter. Accessory used with many of our portable power sources including Booster PAC, Jump-N-Carry and Truck PAC. The cord can be used for charging the jump-pac after use, or for a quick charge of a vehicle from inside the drivers compartment out of the elements. We also have one in a 6ft. length here.

Need powerful, multi-volt charging in a portable unit? Look no further than the JNC1224. With an easy change between voltage settings, it packs a heavy-hitting 3400 Peak Amps of starting power in 12 Volt mode and 1700 Peak Amps of starting power in 24 Volt mode. Its onboard automatic charger can provide up to 24 Hour/365 Day continuous charging.

JNC219 Charger w/Micro USB Jack for JNC8550/JNC8800

JNC311 Jump-N-Carry 500 Peak Amp 12 Volt Lithium Jump Starter and Power Supply, from Jump-N-Carry. The JNC311 combines robust jump-starting power with numerous features that deliver utility and convenience, including preheat capability for improved performance in extreme cold temperatures, USB outlets to power small electronics, 12-volt power supply capability and a high intensity LED work light.

JNC350 Jump-N-Carry AC Extension Cord For JNC4000 JNC660 JNCAIR JNC770R JNCXF

An entry-level professional unit, the JNC4000 combines power and ease-of-use in a durable, reliable unit. With a built-in charger

JNCAIR Jump-N-Carry 1100 Peak Amp 12 Volt Jump Starter With Air. The new 12V Jump Starter with Air Compressor, Model No. JNC550A, from Jump-N-Cary offers powerful jump starting capability plus the convenience of an integrated air delivery system. The JNC550A delivers 1100 Peak Amps and 300 Cranking Amps of starting power, making it ideal for both professional and enthusiast applications.

The JNC660 Features 1700 Peak Amps of power with a 22 Amp Hour sealed lead acid battery and now features an automatic float mode 115v. Auto Charging Unit to prevent overcharging, you can leave it on a charge indefinitely and its always ready to go. The new charger also means longer battery life. Battery status indicator gauge shows battery status with a push of a button. Heavy duty 46" #2 welding cables provide ample power for even tough starts on trucks.

Power. It’s the calling card of a Jump-N-Carry. Absolutely reliable, get-it-done without question power. The new JNC770 is no exception. Its Clore PROFORMER battery is specifically developed to perform the jump starting application and is designed to deliver exceptional cranking power, extended cranking duration, numerous jumps per charge and long service life. Plus, the JNC770R includes numerous features to make jump starting more effective and convenient. Its 68” cable reach enables it to reach the starting points on vehicles of all shapes and sizes. Its new PowerJaw clamps deliver maximum power transfer (rated to 1000 amps) and durability, thanks to their alloy core and dual molded design. A master ON/OFF switch ensures that the clamps are inactive during transportation and storage.

New Ultracapacitor Jump Starters from Jump-N-Carry provide plenty of power for starting vehicles of all shapes and sizes, such as cars, SUVs, light and medium duty trucks. These units utilize an ultracapacitor power source, which is largely unaffected by cold temperatures, providing approximately the same starting power whether it is 70˚F or -30˚F. Ultracapacitor power supply delivers a whopping 550 Start Assist Amps. Features 46” #4 AWG Cables and Heavy-Duty PowerJAW™ Clamps. A Internal lithium battery to charge unit even at temperatures as low as -40˚F. Easy-to-use design and Includes wall charger and 12V charging cord. 1 Year Limited Warranty

New Ultracapacitor Jump Starters from Jump-N-Carry provide plenty of power for starting vehicles of all shapes and sizes, such as cars, SUVs, light and medium duty trucks. These units utilize an ultracapacitor power source, which is largely unaffected by cold temperatures, providing approximately the same starting power whether it is 70˚F or -30˚F. Ultracapacitor power supply delivers a whopping 800 Start Assist Amps. Features 68” #2 AWG Cables and Heavy-Duty PowerJAW™ Clamps. A Internal lithium battery to charge unit even at temperatures as low as -40˚F. Easy-to-use design and Includes wall charger and 12V charging cord. 1 Year Limited Warranty

It's the largest 12 Volt Jump-N-Carry unit we manufacture, with 2000 Peak Amps of starting power, it will spin the starters on all class 1-6 commercial trucks

The NEW JNCAIR from Jump-N-Carry takes multi-function professional jump starting to a whole new level. With automatic charging, extra-long 68" cables, industrial grade Hot Jaw clamps, built-in air gauge, and a 12 ft. coiled air hose with screw-on chuck, the JNCAIR is as convenient as it is powerful.

PP15 CHARGE IT! 15000 mAHr Lithium Micro Jump Starter - The CHARGE IT! Model PP15 15000 mAh POWER PAC is a lithium-battery based multi-voltage power supply and 12 Volt jump starter. With 15000 mAh of reserve capacity and multiple output voltages, the POWER PAC PP15 can power a wide variety of devices, electronics and accessories. In addition, the PP15 can be used to jump start vehicles from motorsports equipment, personal watercraft and ATVs to cars, trucks and SUVs. Delivering 400 Peak Amps and 270 Cranking Amps of starting power, it is powerful enough to start most 4- and 6-cylinder passenger vehicles.