30-480 CPS Cap 1/4 SAE Female w/strap

35-102 CPS Main Power Switch DPST On-Off

36-004 CPS Check Valve 1/8 mpt-1/4 mfl .5psi

39-007 CPS Fan Motor Assembly 110v

39-011 CPS Circuit Breaker 8 amp

41-612 CPS FAN GRILLE 4" MUFFIN CHROME

42-195 CPS KNOB  PRO-SET  PLASTIC ROUND

44-132 CPS Front Valve Panel CR300

AR2788X40 CPS 6 Ft Power Cord 115 Vac

CASEBLK-A1 CPS Plastic Housing

Economic Recovery Machine that includes overfill sensor card. Easy-to-use design that utilizes a heavy-duty oil filled compressor and a built in suction filter and is housed in a portable indestructible case. Certified to meet or exceed EPA regulations (UL).

CR3COIL-A1 CPS Condenser Coil Assembly

CR3MANFLD-A1 CPS Manifold Assembly w/Gauges

CR4CMP110-A1 CPS CR400 Compressor Assembly

CRH3-A1 CPS Compressor Oil Drain Hose Assembly CR400

CRXF2 CPS Inlet Fitting Oring Filter Kit

The CRXOS1 CPS Oil Separator provides a simple but effective means to remove small amounts of oil in the recovery stream for cleaner gas. Use in conjunction with a filter drier for even cleaner refrigerant for recharging. Equipped with standard 1/4" flare fittings and an inlet hose. When recovery is complete, simply drain the unit with supplied valve. Includes mounting hardware.

CPS CR Series Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potetially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfulling your tank.

Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potentially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfilling your tank. When the recovery cylinder reaches 80% capacity, the unit is shut off via a relay in the machine. Simply change cylinders and restart the unit. Works with any size cylinder with a 3-pin Brad Harison Plug and includes a shorting cap for working with tanks without a float.

CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.

M2XRK CPS Diaphragm Valve Repair Kit Services 2 Valves

MXPV CPS Black Max Piston Valve Assembly (1) Valve Stem

MXPVO CPS Black Max Piston Seal (Services Two Valves)