• 1" D-handle impact wrench with dual retainer (Hole + Ring)
• Pinless closed reinforced rocking dog impact mechanism
• ergotnomic side handle
• Integrated protective cover on the clutch housing
• Full teasing trigger
• Regulator with integrated forward/reverse
• 3-position power settings in both directions
• Great power for general maintenance applications
• Reinforced clutch mechanism
• Low vibration for a better operator confrot

Specifications:

• Output drive: 1"
• Working Torque Range (fwd): 370 - 1475 (500 - 2000 Nm)
• Maximum Torque (reverse): 1920 ft.lbs (2600 Nm)
• Free speed: 5200 rpm
• Blows per minute: 500
• Net weight: 22.2 lb (10.1 kg)
• Power/weight ratio: 83.8 ft-lb/lb (250 Nm/kg)
• Length: 14.7" (370mm)
• Average air consumption: 10 cfm (4.8 l/s)
• Actual air consumption: 40.7 cfm (19.2 l/s)
• Air inlet thread size: 0.5 "
• Min. hose size: 1/2" (13mm)
• Noise level: 100 db(A)
• Sound Power: 111 db(A)
• Vibration α (ISO-28927-2): 7.8 m/s²
• Vibration K (ISO-28927-2): 1.8 m/s²
• Socket retainer: Dual
• Clutch type: Pin less closed rocking dog
• Bolt size: M32
• Box dimensions: 35.9" x 6.5" x 11" (670mm x 245mm x 130mm)